Documentos de Académico
Documentos de Profesional
Documentos de Cultura
LOSAS DE CIMENTACIÓN
3.0
6.0
3.0 3.0
10.0
4.0 3.0
3.0 10.0
4.0
3.0
.q1 y q2Presiones
Conviene colocar losa de cimentación no tanto por la capacidad de carga, sino por la
compresibilidad del suelo.
. q2 = 2 (q1)
AT = (bT)(LT) = (6)(10) = 60 m²
A2 = (b2)(L2) = (2)(6)(3) = 36 m²
Sustituyendo valores se tiene que:
(60)(1.6) = 24 q1 + 72 q1 96 = 96 q1 q1 = 96/96
Los valores anteriores solo son validos, si se cumplen las tres primeras condiciones,
sí no se cumplen, se tendrá que utilizar la siguiente fórmula en combinación con las figuras
que se presentan, dependiendo el caso.
FE = [1 – (2)(e’/t)][1- (H’/30*t)²]
H'=2H
H'= 0.80 H
e*
e
EJEMPLO.- Revisar por Carga Vertical, el muro del eje A tramo 1 – 3 del ejemplo resuelto
el 08/02/03, utilizando tabique de arcilla recosido (tabique rojo)
Se propone: t = 15 cm
P = 23.92 Ton
P = 29.85 Ton
PR = (FR)(FE)(f*m)(At)
El área del muro es: At = (t)(L) = (15)(600) = 9,000 cm² At = 9,000 cm²
Pi = [(PT)(Li)] / LT
hi
m
am = [(Vs)(g)(h)] / Σ (Pi)(hi)
.i = 1
Sustituyendo en 1, se tiene:
.m
Fi = (mi)(ai) = [(Pi / g)][(hi)(am) / H)] [(Vs)(g)(h)] / Σ (Pi)(hi)
.i = 1
.m
Fi = Vs (Pi)(hi) / [ Σ (Pi)(hi)] Pero: Vs = (Cs)(P)
.i = 1
.m
Fi = (Pi)(hi) / [ Σ (Pi)(hi)] (Cs)(P) Corregir el libro, Pág. 311
.i = 1
Vu = (F.C.)(Vi)
Vu ≤ VR
CONDICIONES:
L/b ≤ 2
Sí H /L > 1.33