Documentos de Académico
Documentos de Profesional
Documentos de Cultura
Propsito
El propsito del presente documento es definir un estndar para elaborar documentacin de
Vicerrectorado Docente
presentacin de la informacin por parte del personal acadmico y tcnico docente.
Versin: VF1.0
Resolucin CS N 076-04-2016-04-20
VICERRECTORADO DOCENTE Cdigo: GUIA-PRL-001
Alcance
El presente estndar ser aplicado a toda la documentacin referente a informes de prcticas
de laboratorio, talleres o centros de simulacin de las Carreras de la Universidad Politcnica
Salesiana.
Formatos
Formato de Gua de Prctica de Laboratorio / Talleres / Centros de Simulacin para
Docentes
Formato de Informe de Prctica de Laboratorio / Talleres / Centros de Simulacin para
Estudiantes
Resolucin CS N 076-04-2016-04-20
VICERRECTORADO DOCENTE Cdigo: GUIA-PRL-001
3. Exposicin
Resolucin CS N 076-04-2016-04-20
VICERRECTORADO DOCENTE Cdigo: GUIA-PRL-001
4. Proceso
Resolucin CS N 076-04-2016-04-20
VICERRECTORADO DOCENTE Cdigo: GUIA-PRL-001
3. Seleccionar el tipo de Proyecto que se va a realizer y se realiza los diferentes pasos para el nuevo
Proyecto.
4. Realizar el diseo para controlar tres motores comandados desde dos puestos con 2 pulsantes (S1 y
S2), un pulsante de paro general (S0), las condiciones estn dadas, para cuando los motores estn
funcionando con el pulsante S1 si se pulsa el S2 no debe suceder ningn evento, y para el otro caso
cuando funcionan los motores con el pulsante S2 no debe suceder nada. Simulacin en CADSim
Resolucin CS N 076-04-2016-04-20
VICERRECTORADO DOCENTE Cdigo: GUIA-PRL-001
CONCLUSIONES:
At the moment the practice is realized that it is possible to observe that this PLC technology is useful, it is indispensable
for the automation in the industrial plants and that there is no need of much wiring, besides saving a lot of time in the
implementations of the automated systems. Finally I can get the contacts and pulses of the TIA Portal software
necessarily be labeled with a name to be able to be activated when the circuits are being simulated; In this practice it
is labeled IB124.n and QB124.n.
RECOMENDACIONES:
Revisar la conexin entre el TIAPortal y el modulo del PLC antes de empezar a realizar la simulacin,
para evitar problemas.
Firma: _______________________________
Resolucin CS N 076-04-2016-04-20
VICERRECTORADO DOCENTE Cdigo: GUIA-PRL-001
ACTIVIDADES DESARROLLADAS
1. Encender la computadora y buscar el software.
2. Ejecutar el software TIA Portal V13
3. Seleccionar el tipo de Proyecto que se va a realizer y se realiza los diferentes pasos para el nuevo
Proyecto.
4. Realizar el diseo para controlar tres motores comandados desde dos puestos con 2 pulsantes
(S1 y S2), un pulsante de paro general (S0), las condiciones estn dadas, para cuando los
motores estn funcionando con el pulsante S1 si se pulsa el S2 no debe suceder ningn evento,
y para el otro caso cuando funcionan los motores con el pulsante S2 no debe suceder nada.
Simulacin en CADSim
5. Simular el esquema diseado para comprobar su funcionamiento.
6. Implementamos el diseo en el software de TIAPortal.
RESULTADO(S) OBTENIDO(S):
Resolucin CS N 076-04-2016-04-20
VICERRECTORADO DOCENTE Cdigo: GUIA-PRL-001
CONCLUSIONES:
At the moment the practice is realized that it is possible to observe that this PLC technology is useful, it is
indispensable for the automation in the industrial plants and that there is no need of much wiring, besides saving a
lot of time in the implementations of the automated systems. Finally I can get the contacts and pulses of the TIA
Portal software necessarily be labeled with a name to be able to be activated when the circuits are being simulated;
In this practice it is labeled IB124.n and QB124.n.
RECOMENDACIONES:
Revisar la conexin entre el TIAPortal y el modulo del PLC antes de empezar a realizar la simulacin,
para evitar problemas.
Resolucin CS N 076-04-2016-04-20