Documentos de Académico
Documentos de Profesional
Documentos de Cultura
• Título: Estudio de chorros de gas natural a alta presión impactando sobre superficies sólidas y de
chorros bifásicos de propano sobrepresurizados.
• Título: Estudio numérico de los factores de transferencia (de fricción y de Colburn) en perfiles de
precalentadores regenerativos.
Area de Mecánica de Fluidos: Dinámica de fluidos computacional. Ms. Ing. Luis Julca Verástegui.
Escuela de Ingeniería Mecánica- Dpto. de Mecánica y Energía.
Bibliografía:
http://v1.nedstatbasic.net/stats?
ABChnAR4hu4Y4QQ/ZsSsvTTge1Cwhttp://v1.nedstatbasic.net/stats?
ABChnAR4hu4Y4QQ/ZsSsvTTge1Cw
http://info.uned.es/ind-4-mecanica-fluidos/index.htm
http://www.uned.es/http://www.uned.es/
Publicaciones en revistas
• J. Hernández, A. Crespo y N. Duijm, ``Numerical modeling of turbulent jet diffusion flames in the
atmospheric surface layer'', Combustion and Flame 101, 113-131, 1995.
• A. Crespo y J. Hernández, ``Turbulence characteristics in wind-turbine wakes'', Journal of Wind
Engineering and Industrial Aerodynamics 61, 71-85, 1996.
• J. Servert, A. Crespo y J. Hernández, ``A One-Dimensional Model of a Turbulent Jet Diffusion
Flame in an Ambient Atmospheric Flow, Derived from a Three-Dimensional Model'', Combustion
Science and Technology 124, 83-114, 1997.
• B. Zamora y J. Hernández, ``Influence of Variable Property Effects on Natural Convection Flows in
Asymmetrically-Heated Vertical Channels'', Int. Comm. Heat & Mass Transfer 24, no. 8, 1153-1162,
1997.
• B. Zamora y J. Hernández, ``Numerical Analysis of Flow Reversals in Natural-Convection-Cooled
Vertical Channels,'' The Phoenics Journal of Computational Fluid Dynamics 11, n 2, 168-186, 1998.
• A. Crespo, J. Hernández y S. Frandsen, ``Survey of Modelling Methods for Wind-Turbine Wakes
and Wind Farms,'' Wind Energy 2, 1-24, 1999.
• J. López, J. Hernández, F. Faura y G. Trapaga, ``Shot Sleeve Wave Dynamics in the Slow Phase of
Die Casting Injection'', ASME Journal of Fluids Engineering, 122, 349-356, 2000.
• J. López, P. Franco, F. Faura y J. Hernández, ``Análisis Numérico del Atrapamiento de Aire en el
Proceso de Fundición por Inyección a Alta Presión de una Placa de Aluminio'', Anales de Ingeniería
Mecánica, año 13, Vol. III, 1, 2101-2112, 2000.
• P. Gómez, J. Hernández, J. López y F. Faura,``Numerical Simulation of Free Surface Flows in Die
Casting Injection Processes,'' The Phoenics Journal of Computational Fluid Dynamics 13, n 2, 186-
203, 2000.
• F. Faura, J. López y J. Hernández, ``On the Optimum Plunger Acceleration Law in the Slow Shot
Phase of Pressure Die Casting Machines'', Journal of Machine Tools & and Manufacture, 41, no. 2,
173-191, 2001.
• B. Zamora y J. Hernández, ``Influence of Upstream Conduction on the Thermally Optimum Spacing
of Isothermal, Natural Convection-Cooled Vertical Plate Arrays'', Int. Comm. Heat Mass Transfer,
28, no. 2(01), 201-210, 2001.
• J. Hernández, J. López y F. Faura, ``Influence of Unsteady Effects on Air Venting in Pressure Die
Casting'', ASME Journal of Fluids Engineering. Aceptado.
Publicaciones en congresos
• ``A One-Dimensional Model of Jet Fires and of its Interaction with Obstacles'', Proceedings of the
Third Caribbean Congress on Fluid Dynamics, Caracas, Venezuela, Febrero 1995. ISBN 980-237-
093-2
• ``Hydrocarbon Fires in Road Tunnels'', Workshop on Hazardous Spills in Tunnels, Zurich, April
1995.
• ``Application of the One-Dimensional Model UPMFIRE to Calculate Jet Fire Characteristics and its
Interaction with Obstacles'', Proceedings of the 8th International Symposium on Loss Prevention and
Safety Promotion in the Process Industries, Amberes, Junio 1995, Elsevier Science, Vol. II, pp. 105-
114. ISBN 044821368.
• ``Modelization of the Interaction of a Jet Fire with an Obstacle'', Proceedings of the Joint Meeting of
the Portuguese, British, Spanish and Swedish Sections of the Combustion Institute, Funchal,
Madeira, Abril 1996.
• ``Modelization of Offshore Windfarms. Effects of the Surface Roughness of the Sea'', Proceedings
of the European Wind Energy Conference, EWEC'96, Gotemburgo, Suecia, Mayo 1996. Editorial
H.S. Stephens & Associates. ISBN 0-9521452-9-4.
Area de Mecánica de Fluidos: Dinámica de fluidos computacional. Ms. Ing. Luis Julca Verástegui.
Escuela de Ingeniería Mecánica- Dpto. de Mecánica y Energía.
• ``Estudio numérico de flujos inducidos por convección natural en sistemas de canales verticales
múltiples,'' Actas del XII Congreso Nacional de Ingeniería Mecánica, Bilbao, Febrero 1997.
• ``Numerical Analysis of Flow Reversals in Natural-Convection-Cooled Vertical Channels,''
Proceedings of the 7th International Phoenics Users Conference, Sevilla, Mayo 1997.
• ``Análisis numérico del flujo laminar en un difusor en S de sección rectangular,'' Actas del III
Congreso Iberoamericano de Ingeniería Mecánica, La Habana, Septiembre 1997.
• J. Hernández, J. López, P. Gómez y F. Faura, ``Influence of Non-Hydrostatic and Viscous Effects on
Shot Sleeve Wave Dynamics in Die Casting Injection,'' 1999 ASME/JSME Fluids Engineering
Conference. Forum on Advances in Free Surface and Interface Fluid Dynamics, San Francisco, CA,
18-23 Julio, 1999. ASME FED Vol. 248, ISBN 0-7918-1961-2.
• A. Crespo, J. García, P. Gómez y J. Hernández, ``Simulación Numérica de Incendios y Ensayos con
Humos Fríos en Túneles de Carretera,'' IV Congreso Métodos Numéricos en Ingeniería, Sevilla,
Junio 1999.
• A. Crespo, J. García, E. Migoya, J. Hernández y P. Gómez, ``Fire Simulation in a Road Tunnel,'' 6
International Symposium on Fire Safety Science, IAFSS, Poitiers, Francia, Julio 1999.
• J. Hernández, ``Aplicación de la Dinámica de Fluidos Computacional a Procesos Productivos,'' Los
últimos 10 años en la Ingeniería de Fluidos, Universidad de Valladolid, enero 10-14, 2000.
• J. López, J. Hernández, F. Faura y P. Gómez, ``Effects of Shot Sleeve Wave Reflection on Air
Entrapment in Pressure Die Casting Processes,'' Symposium on Flows in Manufacturing Processes of
the 2000 ASME Fluids Engineering Summer Conference, Boston, Massachusetts, June 11-15, 2000.
ASME FED Vol. 251, ISBN 0-7918-1996-5.
• P. Gómez, J. Hernández, J. López y F. Faura,``Numerical Simulation of Free Surface Flows in Die
Casting Injection Processes,'' Eighth International PHOENICS User Conference, Luxembourg, May
17-20, 2000.
• J. López, P. Franco, F. Faura y J. Hernández, ``Análisis Numérico del Atrapamiento de Aire en el
Proceso de Fundición por Inyección a Alta Presión de una Placa de Aluminio'', Actas del XIV
Congreso Nacional de Ingeniería Mecánica, Madrid, Diciembre 2000.
• J. Hernández, A. Crespo, P. Gómez, J. López y F. Faura, ``Breaking waves in a High-Pressure Die-
Casting Injection Chamber,'' 4th International Conference On Multiphase Flow, New Orleans,
Louisiana, USA, May 27 to June 1, 2001.
Area de Mecánica de Fluidos: Dinámica de fluidos computacional. Ms. Ing. Luis Julca Verástegui.