Documentos de Académico
Documentos de Profesional
Documentos de Cultura
3D FFF
0 reseñas
A 3D printable light, durable and efficient Wire Guide Clip for the FLSUN QQ Delta 3D printer
f k h d
40m 4× archivo 0.20 mm 0.40 mm PET 6.00 g Prusa MINI
de ASA / MINI+
impresión
DESCARGA 6×
Detalles Archivos Makes y Comentarios Archivos de modelo del usuario Autor Remixes Colecciones Impresiones relacionadas
11 0 0 0 3
Descripción PDF
A 3D printable light, durable and efficient Wire Guide Clip for the FLSUN QQ Delta 3D printer,
designed to secure the wires inside the towers.
The part can be easily 3D printed, without any support, on a modern inexpensive 3D Printer. They
can be printed with a variety of heat tolerant materials, including PETG, ABS, ASA and many
other types of heat tolerant printable materials.
PETG works very well for this application. It is easy to print. The object should be durable, easy to
maintain, and last for a long time.
PLA should be avoided because the part may be suject to temperature exceeding ~55 C (~ 130 F)
during normal use, especially when printing filament such as PETG, ABS, ASA or other that
require a hot bed surface.
Printing Details
- Layer Hight: .2 mm
- 2 perimeters or shells
- 5 bottom layers
- 5 top layers
- Infill ~20%
Assembly Instructions
Note: I found that 3 separate rows of clips work best for me. Therefore 9 clips total.
Please feel free to visit my store on My Mini Factory to view the other objects that I designed:
https://www.myminifactory.com/users/DanoSoft
Etiquetas
Licencia