Documentos de Académico
Documentos de Profesional
Documentos de Cultura
Concursos SOS
Micrófono WIN Lauten Audio LA-320 V2
¡GANAR! Focusrite ISA 428 MkII
Anuncios de lectores
VER TODOS LOS ANUNCIOS
CREAR ANUNCIO GRATIS
https://www.soundonsound.com/forum/viewtopic.php?f=20&t=55497 1/6
3/9/23, 21:27 Hack del controlador heredado USB Edirol/Roland para Windows 10 - Foro SOS
Grabación: equipo y técnicas 03 de septiembre de 2023, 18:56
FORUM INDEX > MAIN FORUMS > WINDOWS MUSIC >
Quick links
SUSCRÍBETE A
LOS BOLETINES SOS
Edirol/Roland USB legacy driver hack for Windows 10
Moderator: Moderators
Sadly Edirol/Roland do not officially support Win 10 with some of their older USB devices (likely
due to costly driver certification?), so was unable to install my previously trusty Edirol UM-3EX 3-
in/out MIDI interface. It attempts to install them, gets halfway through, then suddenly states the
drivers aren't compatible and automatically launches the uninstall process.
Audio interfaces:
Cakewalk FA-66 [limited]
EDIROL FA-66 [limited]
FA-101
UA-1EX
UA-25
Midi interfaces:
UM-1/1EX/1S/1SX/1X
Alan Meyerson: Mezclando las películas Parte 2 - Video
UM-2/2C/2E/2EX
UM-3EX
adicional de desglose de Thor Ragnarok
UM-550
Hace 1 mes 2 semanas.
UM-880
V-Studio:
V-STUDIO 20
V-STUDIO 700 CONSOLE
V-STUDIO 700 I/O
DTMP:
MA-1EX
SD-20
SD-80
SD-90
Synthesizers:
https://www.soundonsound.com/forum/viewtopic.php?f=20&t=55497 2/6
3/9/23, 21:27 Hack del controlador heredado USB Edirol/Roland para Windows 10 - Foro SOS
Fantom-G6
Fantom-G7
Fantom-G8
SonicCell
Attempting to install with compatibility settings, admin privileges, etc. also fail to work.
However there is a workaround that people have used with V-Drums and it worked for my UM-
3EX too, although it takes a little editing and bypassing certification. It's worth a try before you
junk or ebay the unit which I was about to do.
[Roland.NTamd64.7]
;; not supported
• The above lines of code show the drivers would be installed by Windows 8.x, but not for versions
after it, even if they are compatible. To get it to install for Windows 10 you will need to copy the
line of code that was used for [Roland.NTamd64.6.2] and paste it into the [Roland.NTamd64.7]
section, overwriting where it says ";; not supported".
So you should now have something similar below, where your Edirol/Roland device is duplicated
for both the Roland.NTamd64.6.2 and Roland.NTamd64.7 portions:
[Roland.NTamd64.7]
%RDID0058DeviceDesc%=RDID0058Install, USB\VID_0582&PID_009A ; UM-3EX
Given the drivers have now effectively been 'tampered' with, Windows won't automatically allow
them to be executed as a security precaution. Therefore you will need to install them without
driver signature enforcement.
To do this (before going further you may need to write these down as you'll be restarting your PC
and may not know what to click)....
• Click Windows Start, and type "Change advanced start-up options" and execute it. This will take
you to the Windows 10 Settings Recovery options.
• On the right, where it says Advanced Startup, choose "Restart Now"
• Once it takes you to the blue menu screen, click: "Troubleshoot", followed by "Advanced
Settings" > "Startup Settings" > "Restart".
• Once PC has restarted, press the number 7 to 'Disable driver signature enforcement'.
• Finally, navigate to where you extracted and modified the drivers and install the new modified
drivers. Follow any on-screen prompts and insert the Edirol/Roland USB device when requested
to complete the installation.
• Restart PC after completion (this will automatically take you out of 'disable driver signature'
mode).
Done.
Hope this may help others in the same predicament as it helped me. Full kudos to intouch1 from
the vdrums forum: https://www vdrums com/forum/advanced/t ver solved
https://www.soundonsound.com/forum/viewtopic.php?f=20&t=55497 3/6
3/9/23, 21:27 Hack del controlador heredado USB Edirol/Roland para Windows 10 - Foro SOS
the vdrums forum: https://www.vdrums.com/forum/advanced/t ... ver-solved
~Timo
Tímo Posts: 121
Regular Joined: Wed Sep 25, 2002 12:00 am
Location: Derby, England
Thank you for the clear and concise instructions, much appreciated!
Sadly this does *NOT work for the expensive gem that is the um-550 (& um- 880), which is handy
as it may convice those holding on to them - to sell them at last and let the price drop from the
rest of us! (Please?). ( Guilty lie smile face )
Thank you!!
caicai Posts: 1
Joined: Thu Mar 23, 2017 10:55 pm
Thanks for that. I've got a UA-25 which I've been using in class-compliant mode with my Surface
but that has meant I can't use 24 bit or MIDI. I'll give this a whirl.
CC
ConcertinaChap Posts: 12220
Jedi Poster Joined: Wed Jul 20, 2005 12:00 am
Location: Bradford on Avon
Contact:
Hi guys,
I just picked up an Edirol M-80 but (stupidly) forgot to check the support page, Roland stopped
supporting the keyboard after 8.1. The hack worked like a charm, if fact my Fantom X8 doesn't
seem to like Win 10 64, I might give that a try too!!
Thanks again!
George Wood
Promedia Posts: 3
Joined: Sat Sep 05, 2015 12:00 am
Location: Livingston
Professional composer / producer based in the UK - https://soundcloud.com/george-wood
Dear Timo
Ive been using my PCR 500 for years since Win7 and now thanks to you Im still using it with
Win10. The hardware is still great and Ill keep using it till it dies.
Diego
saresu Posts: 1
Joined: Wed Aug 30, 2017 12:18 pm
Location: Japan
Contact:
I used an almost identical method to get my 16 year old Roland XV5050 module to work with Win
10, so definitely worth a try with any older Roland USB hardware.
EddieTemple Posts: 1
Joined: Thu Aug 31, 2017 9:11 pm
For Edirol PC-50 it turned out to be easy (after a lot of hacking and cursing). Detach the USB cable,
turn off the power, move the "Advanced Driver" switch to off, reconnect and turn on the power
again. That's it!
SveinJo Posts: 1
Joined: Mon Nov 06, 2017 5:10 pm
I have found this hack to work for my Edirol UM-1X, but find that after a Windows update the
driver has been removed. I think this is now the third time.
The hardware is still in good condition, and once the driver is properly set up it works like a
charm. Why should I need to buy a new device, or go through this convoluted process over and
over again?
greenfox4075 Posts: 1
Joined: Wed Nov 08, 2017 12:58 am
greenfox4075 wrote:
I have found this hack to work for my Edirol UM-1X, but find that after a Windows update the driver
has been removed. I think this is now the third time.
I think it's because such Windows updates are entire OS refreshes, rather than bolt-ons, and it
afterwards attempts to redownload and install new drivers rather than re-use the ones that are
previously installed.
The Edirol device seemingly wont be recognised after such an OS update. The LED on my UM-3EX
didn't even light up showing it was connected, regardless of which USB port I tried, looking for all
the world like it was a dead device.
After the OS update I removed the device, uninstalled the Edirol drivers (they were still seemingly
installed), restarted the PC, then followed the same instructions on this page again to reinstall the
device, and everything's lit up and working again. Luckily the methodology hasn't changed with
each update at all.
I've saved my own modified drivers to a compressed file (WinZip) to save downloading and editing
them from the internet each time, though. Cuts one headache out at least.
Tímo Posts: 121
Regular Joined: Wed Sep 25, 2002 12:00 am
Location: Derby, England
Thanks so much for going to the trouble of posting this and explaining it so clearly!! Brilliant
advice and worked perfectly for my Edirol PCR 500 today :
Sebadams Posts: 2
Joined: Thu Dec 04, 2008 12:00 am
Hi, thought I would flag this one up again, as the latest Windows 10 update caused the (previously
hacked ‘W10’) Roland drivers to stop working again on my UM-880/UM-550. By stop working I
mean that the USB LED indicators on the 880/550 went out and no data transfer USB>MIDI with
Edirol Original Driver setting. They would work in generic USB driver mode, but I read
(above/elsewhere) that updates might stop previously working unsigned drivers, and it would be
necessary to reinstall.
Followed the advice above again, but would add, you might as well uninstall the ‘old’ drivers first
(uninstall EXE is in the driver folders), as the driver installation insists on uninstalling followed
directly by reboot, so after a reboot it isn’t in the special mode and won’t install unsigned drivers
anyway, might as well get it out of the way first.
The UM-550/880 drivers installed fine, albeit some of the ports now have different names to
before, so I have had to re-assign the “friendly names” in Reaper...
There goes another few hours of my life dealing with the consequences of Windows updates
Hi Peeps,
I have an Edirol FA 66 that I recently dusted off. Since I have upgraded my computer from an
ancient MAC to a spanky Win 10 since I last used the FA 66, I searched the net for cable
connectivity solutions as my new computer has a thunderbolt port, no Firewire. I read that it is
possible to go from FW400 to TB2, TB2 to TB3 with the right adapters so have forked out on
those.
Then read the OP of this thread, with the advanced startup procedure. I am not super savvy about
all this, and may be missing something, but I have tried and tried to get it to install about
67,897,00 times with no success.
I would assume that if it works with Tb, it should install with Tb as well?
What am I missing?
FORUM INDEX > The team Members All times are UTC+01:00
https://www.soundonsound.com/forum/viewtopic.php?f=20&t=55497 6/6