Documentos de Académico
Documentos de Profesional
Documentos de Cultura
*4–36. Draw the shear and moment diagrams of the 100 lb/ft
beam. Assume the support at B is a pin and A is a roller. 800 lb · ft
A B
4 ft 16 ft
4–37. Draw the shear and moment diagrams for the beam. 8 kN/ m
Assume the support at B is a pin.
A B
1.5 m 6m
108
© 2012 Pearson Education, Inc., Upper Saddle River, NJ. All rights reserved. This material is protected under all copyright laws as they currently
exist. No portion of this material may be reproduced, in any form or by any means, without permission in writing from the publisher.
4m
6m
109
© 2012 Pearson Education, Inc., Upper Saddle River, NJ. All rights reserved. This material is protected under all copyright laws as they currently
exist. No portion of this material may be reproduced, in any form or by any means, without permission in writing from the publisher.
4–39. Draw the shear and moment diagrams for each 0.8 k/ft
member of the frame. Assume the support at A is a pin and
D is a roller. B C
0.6 k/ft
16 ft
A D
20 ft
110
© 2012 Pearson Education, Inc., Upper Saddle River, NJ. All rights reserved. This material is protected under all copyright laws as they currently
exist. No portion of this material may be reproduced, in any form or by any means, without permission in writing from the publisher.
8 ft 4 ft
15 ft
A D
111
© 2012 Pearson Education, Inc., Upper Saddle River, NJ. All rights reserved. This material is protected under all copyright laws as they currently
exist. No portion of this material may be reproduced, in any form or by any means, without permission in writing from the publisher.
0.8 k/ft
B C
15 ft
A D
8 ft
Vmax = 20.0 k Ans.
6 ft 6 ft
112
© 2012 Pearson Education, Inc., Upper Saddle River, NJ. All rights reserved. This material is protected under all copyright laws as they currently
exist. No portion of this material may be reproduced, in any form or by any means, without permission in writing from the publisher.
4–43. Draw the shear and moment diagrams for each 4 k/ft
member of the frame. Assume the frame is pin connected at
A, and C is a roller. B
15 k
C
4 ft
10 k
4 ft
10 ft
*4–44. Draw the shear and moment diagrams for each 1.5 k/ ft
member of the frame. Assume the frame is roller supported
at A and pin supported at C. B
A
10 ft
6 ft
2k
6 ft
113
© 2012 Pearson Education, Inc., Upper Saddle River, NJ. All rights reserved. This material is protected under all copyright laws as they currently
exist. No portion of this material may be reproduced, in any form or by any means, without permission in writing from the publisher.
A B
6m 4 kN/m
45⬚
C
Support Reactions:
+ c a Fy = 0; Ay - 25 + 11.667 = 0
Ay = 13.3 kN
+Q a Fy¿ = 0; 4 - 12 + Cy¿ = 0
Cy¿ = 8 kN
114
© 2012 Pearson Education, Inc., Upper Saddle River, NJ. All rights reserved. This material is protected under all copyright laws as they currently
exist. No portion of this material may be reproduced, in any form or by any means, without permission in writing from the publisher.
B C 2 kN/m
4m
D
A
3m 2m 2m 3m
a + a MD = 0; 10(2.5) + 5(3) + 10(5) + 5(7) - Ay(10) = 0
Ay = 12.5 kN
- 10 a b + Dx = 0
+ 4
: a Fx = 0;
5
Dx = 8 kN
+ c a Fy = 0; 12.5 - 5 - 10 - 5 - 10 a b + Dy = 0
3
5
Dy = 13.5 kN
115
© 2012 Pearson Education, Inc., Upper Saddle River, NJ. All rights reserved. This material is protected under all copyright laws as they currently
exist. No portion of this material may be reproduced, in any form or by any means, without permission in writing from the publisher.
4–47. Draw the shear and moment diagrams for each 300 lb/ ft
member of the frame. Assume the joint at A is a pin and
support C is a roller. The joint at B is fixed. The wind load is
transferred to the members at the girts and purlins from the
C 3.5 ft
simply supported wall and roof segments.
30⬚ 3.5 ft
B
500 lb/ ft
7 ft
Support Reactions:
+
: a Fx = 0; 1.75 + 3.5 + 1.75 + 4.20 sin 30° - 5.133 - Ax = 0
Ax = 3.967 kN
116
© 2012 Pearson Education, Inc., Upper Saddle River, NJ. All rights reserved. This material is protected under all copyright laws as they currently
exist. No portion of this material may be reproduced, in any form or by any means, without permission in writing from the publisher.
*4–48. Draw the shear and moment diagrams for each 250 lb/ft
member of the frame. The joints at A, B and C are pin
connected. B
A 120 lb/ft
6 ft 6 ft
8 ft
60
C
6k
3k
4–49. Draw the shear and moment diagrams for each of
the three members of the frame. Assume the frame is pin 8 ft 8 ft 8 ft
connected at B, C and D and A is fixed.
0.8 k/ ft
B C
15 ft
A D
117
© 2012 Pearson Education, Inc., Upper Saddle River, NJ. All rights reserved. This material is protected under all copyright laws as they currently
exist. No portion of this material may be reproduced, in any form or by any means, without permission in writing from the publisher.
4–50. Draw the moment diagrams for the beam using the 600 lb 600 lb 600 lb
method of superposition. The beam is cantilevered from A.
A
1200 lb⭈ft
3 ft 3 ft 3 ft
118