Documentos de Académico
Documentos de Profesional
Documentos de Cultura
Lm/W
Driver LED
TX-LED 60 TX-LED 90 TX-LED 120 TX-LED 150 TX-LED 220 TX-LED 240
Condiciones de servicio mínimas
Características Ambientales:
Altura sobre el nivel del mar Hasta 3500 m
Humedad relativa ≥ 70 %
Temperatura ambiente promedio -40 °C a 45 °C
Condiciones de Instalación Expuesto a lluvia, contaminación atmosférica, polvo e insectos, velocidad del
viento <30Km/h
Flujo Hemisférico Superior (FHS) 0%
Características eléctricas del sistema:
Resistencia a la vibración De acuerdo a IEC 60068-2-6
Voltaje nominal – sistema monofásico 240 / 120 V
Voltaje nominal – sistema trifásico 210 / 121 V – 220 / 127 V
Frecuencia 50 / 60 Hz
Especificaciones Generales
Tipo de luminaria Mid-Power LED
Procedencia China
Año de fabricación 2022
Potencia nominal de la luminaria 90W 120W 150W 200W 220W 240W
Flujo útil total por luminaria (Potencia 12.500 lm 17.000 lm 22.000 lm 29.000 lm 32.500 lm 35.500 lm
nominal según LM79)
Rango de potencia disponible (Opcional) 70-90 w 100-120 w 130-150 w 180-200 w 200-220 w 220-240 w
Reparto de flujo luminoso Asimétrico en los planos C-90/270 grados con mayores intensidades hacia C-90 grados
y simétrico hacia los planos C-0/180 grados.
Reparto de flujo luminoso (Fotometría) Tipo II M Tipo II M Tipo II M Tipo II S Tipo II S Tipo II S
Procedencia China
Rango de voltaje de salida 75-150 Vdc 38-62 Vdc 38-62 Vdc 38-62 Vdc 38-62 Vdc 38-62 Vdc
Rango de voltaje de entrada 90-305 Vac
Consumo propio del driver 7.2W 10.8W 13.5W 16W 17.6W 19.2W
Temperatura máxima de operación 90º C
Sistema de control de luz para dimerización 1-10v / Programable / Dimerizable
Compatibilidad con sistema de Telegestión Interfaz 1-10 / PWM / Timer dimming
Protecciones contra incremento de SCP, OVP, OTP
temperatura
Vida útil mínima ≥100.000 horas (Tc<65°C)
Instalación Interna dentro de la luminaria (dentro del compartimiento eléctrico)
Dispositivo de protección (SPD)
Marca QIYU
Modelo SPD08A-10P/II
Procedencia China
Conexión Serie
Protección de descarga (IEC 61643-11) 10KA / 10KV
深 圳 茂 硕 电 子 科 技 有 限 公 司
SHEN ZHEN MOSO ELECTRONICS TECHNOLOGY CO.,LTD
(Company seal)Return one copy to MOSO with approved signature and company seal.
Product Specification
(Company seal)Return one copy to MOSO with approved signature and company seal.
VERSION HISTORY
Description of Change
Rev.. Changed Date Notes
Before After
The XCP-105W series is 105W outdoor offline programmable LED driver that operates in constant current with
high PF value and universal input voltage range 90~305Vac model. Offline Monitored by dimming cable
connected with an USB kit programming device, the fully programmed drivers offer all dimming, constant
lumen output options and a wide range of output current in a single driver, which deliver maximum flexibility
with customized operating settings and intelligent control options for lighting manufacturers, as one driver can
be programmed for many different luminaire designs. XCP provides built-in timer dimming schedules further
increasing the energy savings and CO2 reductions achieved with LED lighting. It also helps clients to improve
the management of logistics and stock.The compact metal case and high efficiency enables the driver to
operating with high reliability, and extending product lifetime. Overall protection is provided against lightening
surge, output over voltage, short circuit, and over temperature, to ensure low failure rate.
MODELS
Notes:
[1]. Y can be M or V. Y=M means dimmable and offline programmable, The adjustable Iout range: 10%-100% Imax;
Y=V means non-dimmable and output current adjusted by built-in potentiometer.
[2]. Output current adjustable range with constant power at max output power;
[3]. All specifications are measured at 25℃ ambient temperature, input voltage 230Vac, and the typical value tested by
full load, if no specific note.
XCP-105Y150
Notes:The drivers are not allowed to work in over-load condition, otherwise warranty will expire.
Y=V is suitable for the right area of the dotted line;Y=M is suitable for the solid line contain area.
INPUT SPECIFICATIONS
100-240Vac,50-60Hz, 70%-100%
- 5% 10%
THD load
GENERAL SPECIFICATIONS
Efficiency @120Vac
XCP-105Y150
88% 90% Measured at full load and 25℃ambient
Io=0.70 87% 89% temperature
Io=1.05
Efficiency @230Vac
XCP-105Y150
90% 92% Measured at full load and 25℃ambient
Io=0.70 -
89% 91% temperature
Io=1.05
Efficiency @277Vac
XCP-105Y150
90% 92% Measured at full load and 25℃ambient
Io=0.70 89% 91% temperature
Io=1.05
Input-Output - 3750Vac -
DIMMING
Parameter Min. Typ. Max. Notes
SAFETY STANDARDS
Safety Category Country / Territory Standards Approved
CCC China GB19510.1, GB19510.14
EN61347-1, EN61347-2-13 √
CE
Europe EN62493 √
ENEC EN62384 √
CB CB Countries IEC61347-1, IEC61347-2-13 √
BIS India IS 15885(PART 2/SEC 13)
UL USA UL 8750
CUL Canada CSA C22.2 No.250.13
KC South Korea K61347-1, K61347-2-13
PSE Japan J61347-1, J61347-2-13
AS/NZS IEC 61347.2.13
SAA Australia
AS/NZS 61347.1
Insulation
EMC COMPLIANCE
EMC Category Country / Territory Standards Approved
CCC China GB/T 17743, GB 17625.1
EN 55015 √
Europe EN 61000-3-2, EN 61000-3-3 √
CE
EN61000-4-2,3,4,5,6,11 √
EN 61547 √
K61547
KC South Korea
K00015
PSE Japan J55015
FCC USA FCC part 15
NOTE:
This LED driver meets the EMI specifications above, but as a component of a luminaire, end customer need to
identify the EMI performance of a luminaire including LED driver, other devices connected to the driver and on
the luminaire itself.
Derating Curve
100
80
60
Load(%)
120Vac
40 230Vac
20
0
-40 -20 0 20 40 60 80
Ambient Temperature (℃)
EFFICIENCY VS LOAD
XCP-105Y150 (IO=0.70A)
PROTECTIONS
Parameter Notes
Over Temperature Protection Decreases output current, returning to normal after over temperature is removed.
Short Circuit Protection Constant current mode and auto recovery. No damage will occur when any output is short
circuited. The output shall return to normal when the fault condition is removed.
Over Voltage Protection Run into protection model when output voltage exceeds limit, and return to normal when the
fault
XCP-105M150 Types
153.6±1
142.6±1
138.8±1
φ4.0
6.0 34.0
56.0
68.0
4.0 142.6±1
146.6±1
37.0
300±20 300±20
35±5 35±5
10±2 AC
DC 10±2
Brown Brown
Blue Blue
Purple
Gray
Dimming 10±2
35±5
350±20
25.0
Tc 48.0
153,6±1
142,6±1
138,8±1
4
φ4.0
6
68
56
34
142,6±1
146,6±1
37
300±20
Lighting-Dimmer
35±5
10±2
Brown
35±5
DC
Blue AC DC 10±2
Brown
Lighting-Dimmer
Blue
300±20
25
48
Tc
XCP-105M150
XCP-150M062
Product Model:
XCP-150V062
Rev. F.2
Sample Date:
(Company seal)Return one copy to MOSO with approved signature and company seal.
Product Specification
XCP-150M062
Product Model:
XCP-150V062
Rev. F.2
REVISION HISTORY
Description of Change
Version Date Notes
Before Now
The XCP-150W series is 150W outdoor offline programmable LED driver that operates in constant current with
high PF valueand universal input voltage range 90~305Vac model. Offline Monitored by dimming cable
connected with an USB kit programming device, the fully programmed drivers offer all dimming, constant lumen
output options and a wide range of output current in a single driver, which deliver maximum flexibility with
customized operating settings and intelligent control options for lighting manufacturers, as one driver can be
programmed for many different luminaire designs. XCP provides built-in timer dimming schedules further
increasing the energy savings and CO2 reductions achieved with LED lighting. It also helps clients to improve
the management of logistics and stock. The compact metal case and high efficiency enables the driver to
operating with high reliability, and extending product lifetime. Overall protection is provided against lightening
surge, output over voltage, short circuit, and over temperature, to ensure low failure rate.
MODELS
Notes:
[1]. Y can be M or V, Y=M means dimmable and offline programmable. The adjustable Iout range: 10%-100% Imax,
Y=V means non-dimmable and output current adjusted by built-in potentiometer;
[2]. Output current adjustable range with constant power at max output power;
[3]. All specifications are measured at 25℃ ambient temperature, input voltage 230Vac, and the typical value tested by
full load, if no specific note.
XCP-150Y062
Notes:The drivers are not allowed to work in over-load condition, otherwise warranty will expire.
Y=V is suitable for the right area of the dotted line;Y=M is suitable for the solid line contain area.
INPUT SPECIFICATIONS
100-240Vac,50-60Hz, 50%-100%
- 5% 10%
THD load
GENERAL SPECIFICATIONS
Efficiency @115Vac
XCP-150Y062 87% 89% Measured at full load and
86% 88% 25℃ambienttemperature
IO=1.69
IO=2.50
Efficiency @230Vac
XCP-150Y062 Measured at full load and 25℃ambient
89% 91% -
IO=1.69 temperature
88% 90%
IO=2.50
Efficiency @277Vac
XCP-150Y062 Measured at full load and 25℃ambient
89% 91%
IO=1.69 temperature
88% 90%
IO=2.50
Input-Output - 3750Vac -
DIMMING
Parameter Min. Typ. Max. Notes
SAFETY STANDARDS
Safety Category Country / Territory Standards Approved
CCC China GB19510.1, GB19510.14
EN61347-1, EN61347-2-13 √
CE
Europe EN62493 √
ENEC EN62384 √
CB CB Countries IEC61347-1, IEC61347-2-13 √
BIS India IS 15885(PART 2/SEC 13)
UL USA UL 8750
CUL Canada CSA C22.2 No.250.13
KC South Korea K61347-1, K61347-2-13
PSE Japan J61347-1, J61347-2-13
AS/NZS IEC 61347.2.13
SAA Australia
AS/NZS 61347.1
EMC COMPLIANCE
EMC Category Country / Territory Standards Approved
CCC China GB/T 17743, GB 17625.1
EN 55015 √
Europe EN 61000-3-2, EN 61000-3-3 √
CE
EN61000-4-2,3,4,5,6,11 √
EN 61547 √
K61547
KC South Korea
K00015
PSE Japan J55015
FCC USA FCC part 15
NOTE:
This LED driver meets the EMI specifications above, but as a component of a luminaire, end customer need
to identify the EMI performance of a luminaire including LED driver, other devices connected to the driver and
on the luminaire itself.
EFFICIENCY VS LOAD
XCP-150Y062 (Io=2.42A)
PROTECTIONS
Parameter Notes
Decreases output current,returning to normal after over temperature is removed. The max
Over Temperature Protection
derating could be 30% (typ.).
Short Circuit Protection Hiccup mode and auto recovery. No damage will occur when any output is short circuited.
The output shall return to normal when the fault condition is removed.
Over Voltage Protection Run into protection model when output voltage exceeds limit, and return to normal when the
fault
1-10V/PWM DIMMING
100%
90%
80%
70%
60%
50%
40%
30%
20%
10%
0%
1-10V Dimming Voltage(V) 0 1 2 3 4 5 6 7 8 9 10 11 12
PWM Dimming Duty 0% 10% 20% 30% 40% 50% 60% 70% 80% 90% 100%
MECHANICAL OUTLINE
XCP-150M062 types
173.6±1
162.6±1
158.8±1
4.0
φ4.0 34.0
6.0
56.0
68.0
162.6±1
166.6±1
37.0
300±20
35±5 300±20
10±2
Brown 35±5
Blue AC
10±2
DC Red
Black
Purple
Gray
Dimming 10±2
35±5
25.0 350±20
Tc point 48.5
173,6±1
162,6±1
158,8±1
4
φ4 6
68
56
34
162,6±1
166,6±1
37
300±20
35±5 300±20
10±2
Brown 35±5
10±2
Blue AC DC Red
Black
Output
Lighting dimmer
Lighting dimmer
25.0
Tc 48.5
point
LABEL
XCP-150M062
XCP-150V062
PRODUCT SUMMARY
Typical 4000 K, 70 CRI 3000 K, 80 CRI
Power Test Test Maximum
Product Forward
Class Temperature Current Current
Voltage Typical Flux Typical Efficacy Typical Flux Typical Efficacy
JB3030 3‑V 0.2 W 25 °C 65 mA 2.8 V 35.5 lm 195 LPW 32 lm 176 LPW 240 mA
JK3030 3‑V 1W 25 °C 350 mA 3.2 V 156 lm 139 LPW 139 lm 124 LPW 400 mA
JK3030 6‑V 1W 25 °C 150 mA 6.0 V 152 lm 169 LPW 138 lm 153 LPW 200 mA
www.cree.com/JSeries
J Series™ Products are sold exclusively by Cree Venture LED Company Limited (“Cree Venture”), regardless of geography. Any orders for
J Series Products that are submitted to Cree, Inc. or any of its other subsidiaries will be directed to Cree Venture for acknowledgement
and order fulfillment.
Copyright © 2017 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® is a registered trademark Cree, Inc.
and the Cree logo and J Series™ are trademarks of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. J Series products are marketed 4600 Silicon Drive
by Cree, Inc. for the benefit of Cree Venture LED Company Limited. Durham, NC 27703
USA Tel: +1.919.313.5300
J Series™ 3030 LED
Table of Contents
Copyright © 2017 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® is a registered trademark and the Cree logo and J Series™ are trademarks of Cree,
Inc. UL® and the UR logo are registered trademarks of UL LLC. J Series products are marketed by Cree, Inc. for the benefit of Cree Venture LED Company Limited.
2
J Series™ 3030 LED
Order codes and bin codes for J Series 3030 LEDs are configured in the following manner:
Color Color
WT = White WT = White
Copyright © 2017 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® is a registered trademark and the Cree logo and J Series™ are trademarks of Cree,
Inc. UL® and the UR logo are registered trademarks of UL LLC. J Series products are marketed by Cree, Inc. for the benefit of Cree Venture LED Company Limited.
3
J Series™ 3030 LED
Reverse voltage V 5
300
200
105 °C, 196 mA
Rj-a = 30 °C/W
100
50
0
0 20 40 60 80 100 120
Ambient Temperature (°C)
Copyright © 2017 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® is a registered trademark and the Cree logo and J Series™ are trademarks of Cree,
Inc. UL® and the UR logo are registered trademarks of UL LLC. J Series products are marketed by Cree, Inc. for the benefit of Cree Venture LED Company Limited.
4
J Series™ 3030 LED
Flux Characteristics, Order Codes and Bins - JB3030 3‑V (IF = 65 mA, Ta = 25 °C)
The following table provides order codes for J Series JB3030 3‑V LEDs. For a complete description of the order code nomenclature,
please see the Order Code and Bin Code Formats section (page 3). For definitions of the chromaticity kits, please see the Performance
Groups - Chromaticity section (page 20).
Notes:
• Cree Venture maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and
±2 on CRI measurements. See the Measurements section (page 29).
• Cree Venture J Series 3030 LED order codes specify only a minimum flux bin and not a maximum. Cree Venture may ship reels in flux
bins higher than the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity
restrictions specified by the order code.
* Flux values @ 85 °C are calculated and for reference only.
Copyright © 2017 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® is a registered trademark and the Cree logo and J Series™ are trademarks of Cree,
Inc. UL® and the UR logo are registered trademarks of UL LLC. J Series products are marketed by Cree, Inc. for the benefit of Cree Venture LED Company Limited.
5
J Series™ 3030 LED
350%
300%
Relative Luminous Flux
250%
200%
JB3030 3-V
150%
100%
50%
0%
0 20 40 60 80 100 120 140 160 180 200 220 240
Forward Current (mA)
Electrical Characteristics
Electrical Characteristics - JB3030 3‑V
240
220
200
180
Forward Current (mA)
160
140
80
60
40
20
0
2.65 2.70 2.75 2.80 2.85 2.90 2.95 3.00 3.05 3.10 3.15 3.20
Forward Voltage (V)
Copyright © 2017 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® is a registered trademark and the Cree logo and J Series™ are trademarks of Cree,
Inc. UL® and the UR logo are registered trademarks of UL LLC. J Series products are marketed by Cree, Inc. for the benefit of Cree Venture LED Company Limited.
6
J Series™ 3030 LED
Relative Chromaticity
Relative Chromaticity Vs. Current - JB3030 3‑V
vs. Current
0.020
0.015
JB3030 3-V
0.010
0.005
0.000
ΔCCx
ΔCCy
-0.005
-0.010
-0.015
-0.020
0 20 40 60 80 100 120 140 160 180 200 220 240
Current (mA)
0.020
0.015
JB3030 3-V
0.010
0.005
ΔCCx
0.000
ΔCCy
-0.005
-0.010
-0.015
-0.020
25 50 75 100 125 150
Tsp (°C)
Copyright © 2017 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® is a registered trademark and the Cree logo and J Series™ are trademarks of Cree,
Inc. UL® and the UR logo are registered trademarks of UL LLC. J Series products are marketed by Cree, Inc. for the benefit of Cree Venture LED Company Limited.
7
J Series™ 3030 LED
Reverse voltage V 5
450
350
Forward Current (mA)
300
Rj-a = 30 °C/W
250
100
50
0
0 20 40 60 80 100 120
Ambient Temperature (°C)
Copyright © 2017 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® is a registered trademark and the Cree logo and J Series™ are trademarks of Cree,
Inc. UL® and the UR logo are registered trademarks of UL LLC. J Series products are marketed by Cree, Inc. for the benefit of Cree Venture LED Company Limited.
8
J Series™ 3030 LED
Flux Characteristics, Order Codes and Bins - JK3030 3‑V (IF = 350 mA, Ta = 25 °C)
The following table provides order codes for J Series JK3030 3‑V LEDs. For a complete description of the order code nomenclature,
please see the Order Code and Bin Code Formats section (page 3). For definitions of the chromaticity kits, please see the Performance
Groups - Chromaticity section (page 20).
Notes:
• Cree Venture maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and
±2 on CRI measurements. See the Measurements section (page 29).
• Cree Venture J Series 3030 LED order codes specify only a minimum flux bin and not a maximum. Cree Venture may ship reels in flux
bins higher than the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity
restrictions specified by the order code.
* Flux values @ 85 °C are calculated and for reference only.
Copyright © 2017 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® is a registered trademark and the Cree logo and J Series™ are trademarks of Cree,
Inc. UL® and the UR logo are registered trademarks of UL LLC. J Series products are marketed by Cree, Inc. for the benefit of Cree Venture LED Company Limited.
9
J Series™ 3030 LED
Relative
Relative Luminous Flux vs. Intensity vs. Current
Current - JK3030 3‑V (Tj = 85ºC)
125%
100%
Relative Luminous Flux
75%
JK3030 3-V
50%
25%
0%
0 25 50 75 100 125 150 175 200 225 250 275 300 325 350 375 400
Electrical Characteristics
Electrical Characteristics - JK3030 3‑V
400
375
350
325
300
Forward Current (mA)
275
250
225
200 JK3030 3-V
175
150
125
100
75
50
25
0
2.65 2.70 2.75 2.80 2.85 2.90 2.95 3.00 3.05 3.10 3.15 3.20 3.25 3.30
Forward Voltage (V)
Copyright © 2017 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® is a registered trademark and the Cree logo and J Series™ are trademarks of Cree,
Inc. UL® and the UR logo are registered trademarks of UL LLC. J Series products are marketed by Cree, Inc. for the benefit of Cree Venture LED Company Limited.
10
J Series™ 3030 LED
0.020
0.015
JK3030 3-V
0.010
0.005
0.000
ΔCCx
ΔCCy
-0.005
-0.010
-0.015
-0.020
0 25 50 75 100 125 150 175 200 225 250 275 300 325 350 375 400
Current (mA)
0.020
0.015
JK3030 3-V
0.010
0.005
ΔCCx
0.000
ΔCCy
-0.005
-0.010
-0.015
-0.020
25 50 75 100 125 150
Tsp (°C)
Copyright © 2017 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® is a registered trademark and the Cree logo and J Series™ are trademarks of Cree,
Inc. UL® and the UR logo are registered trademarks of UL LLC. J Series products are marketed by Cree, Inc. for the benefit of Cree Venture LED Company Limited.
11
J Series™ 3030 LED
Reverse voltage V 5
250
50
0
0 20 40 60 80 100 120
Ambient Temperature (°C)
Copyright © 2017 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® is a registered trademark and the Cree logo and J Series™ are trademarks of Cree,
Inc. UL® and the UR logo are registered trademarks of UL LLC. J Series products are marketed by Cree, Inc. for the benefit of Cree Venture LED Company Limited.
12
J Series™ 3030 LED
Flux Characteristics, Order Codes and Bins - JK3030 6‑V (IF = 150 mA, Ta = 25 °C)
The following table provides order codes for J Series JK3030 6‑V LEDs. For a complete description of the order code nomenclature,
please see the Order Code and Bin Code Formats section (page 3). For definitions of the chromaticity kits, please see the Performance
Groups ‑ Chromaticity section (page 20).
Notes:
• Cree Venture maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and
±2 on CRI measurements. See the Measurements section (page 29).
• Cree Venture J Series 3030 LED order codes specify only a minimum flux bin and not a maximum. Cree Venture may ship reels in flux
bins higher than the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity
restrictions specified by the order code.
* Flux values @ 85 °C are calculated and for reference only.
Copyright © 2017 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® is a registered trademark and the Cree logo and J Series™ are trademarks of Cree,
Inc. UL® and the UR logo are registered trademarks of UL LLC. J Series products are marketed by Cree, Inc. for the benefit of Cree Venture LED Company Limited.
13
J Series™ 3030 LED
150%
125%
Relative Luminous Flux
100%
50%
25%
0%
0 25 50 75 100 125 150 175 200
Forward Current (mA)
175
150
Forward Current (mA)
125
75
50
25
0
5.30 5.40 5.50 5.60 5.70 5.80 5.90 6.00 6.10 6.20 6.30
Forward Voltage (V)
Copyright © 2017 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® is a registered trademark and the Cree logo and J Series™ are trademarks of Cree,
Inc. UL® and the UR logo are registered trademarks of UL LLC. J Series products are marketed by Cree, Inc. for the benefit of Cree Venture LED Company Limited.
14
J Series™ 3030 LED
0.020
0.015
JK3030 6-V
0.010
0.005
0.000
ΔCCx
ΔCCy
-0.005
-0.010
-0.015
-0.020
0 25 50 75 100 125 150 175 200
Current (mA)
0.020
0.015
JK3030 6-V
0.010
0.005
ΔCCx
0.000
ΔCCy
-0.005
-0.010
-0.015
-0.020
25 50 75 100 125 150
Tsp (°C)
Copyright © 2017 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® is a registered trademark and the Cree logo and J Series™ are trademarks of Cree,
Inc. UL® and the UR logo are registered trademarks of UL LLC. J Series products are marketed by Cree, Inc. for the benefit of Cree Venture LED Company Limited.
15
J Series™ 3030 LED
100%
80%
Relative Radiant Power
60%
6500 K, 70 CRI
4000 K, 70 CRI
40% 4000 K, 80 CRI
20%
0%
380 430 480 530 580 630 680 730 780
Wavelength (nm)
100%
80%
Relative Radiant Power
60%
5000 K, 90 CRI
3500 K, 90 CRI
40% 3000 K, 90 CRI
20%
0%
380 430 480 530 580 630 680 730 780
Wavelength (nm)
Copyright © 2017 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® is a registered trademark and the Cree logo and J Series™ are trademarks of Cree,
Inc. UL® and the UR logo are registered trademarks of UL LLC. J Series products are marketed by Cree, Inc. for the benefit of Cree Venture LED Company Limited.
16
J Series™ 3030 LED
120%
100%
Relative Luminous Flux
80%
JB3030 3-V
60% JK3030 3-V
JK3030 6-V
40%
20%
0%
25 50 75 100 125 150
100%
80%
Relative Luminous Intensity
60%
40%
20%
0%
-90 -70 -50 -30 -10 10 30 50 70 90
Angle (º)
Copyright © 2017 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® is a registered trademark and the Cree logo and J Series™ are trademarks of Cree,
Inc. UL® and the UR logo are registered trademarks of UL LLC. J Series products are marketed by Cree, Inc. for the benefit of Cree Venture LED Company Limited.
17
J Series™ 3030 LED
J Series JB3030 3‑V LEDs are tested for luminous flux at 65 mA and placed into one of the following luminous-flux groups.
Group Code Minimum Luminous Flux (lm) Maximum Luminous Flux (lm)
C3 22 24
C4 24 26
C5 26 28
D2 28 30
D3 30 32
D4 32 34
D5 34 36
E2 36 38
E3 38 40
J Series JK3030 3‑V LEDs are tested for luminous flux at 350 mA. J Series JK3030 6‑V LEDs are tested for luminous flux at 150 mA. Both
are placed into one of the following luminous-flux groups.
Group Code Minimum Luminous Flux (lm) Maximum Luminous Flux (lm)
H4 100 107
J2 107 114
J4 114 121
K2 121 128
K4 128 135
L2 135 142
L4 142 149
M2 149 156
M4 156 163
N2 163 170
Copyright © 2017 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® is a registered trademark and the Cree logo and J Series™ are trademarks of Cree,
Inc. UL® and the UR logo are registered trademarks of UL LLC. J Series products are marketed by Cree, Inc. for the benefit of Cree Venture LED Company Limited.
18
J Series™ 3030 LED
J Series 3030 LEDs are tested for forward voltage and placed into one of the following voltage bins.
The following voltage bins are indicated in the Forward Voltage Bin field in the bin code for JB3030 3‑V LEDs.
Voltage Bin Minimum Forward Voltage (V) Maximum Forward Voltage (V)
AD 2.7 2.8
AE 2.8 2.9
AF 2.9 3.0
AG 3.0 3.1
The following voltage bins are indicated in the Forward Voltage Bin field in the bin code for JK3030 3‑V LEDs.
Voltage Bin Minimum Forward Voltage (V) Maximum Forward Voltage (V)
AG 3.0 3.1
AH 3.1 3.2
AJ 3.2 3.3
AK 3.3 3.4
The following voltage bins are indicated in the Forward Voltage Bin field in the bin code for JK3030 6‑V LEDs.
Voltage Bin Minimum Forward Voltage (V) Maximum Forward Voltage (V)
BP 5.8 6.0
BQ 6.0 6.2
BR 6.2 6.4
Copyright © 2017 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® is a registered trademark and the Cree logo and J Series™ are trademarks of Cree,
Inc. UL® and the UR logo are registered trademarks of UL LLC. J Series products are marketed by Cree, Inc. for the benefit of Cree Venture LED Company Limited.
19
J Series™ 3030 LED
J Series 3030 LEDs are tested for chromaticity and placed into one of the regions defined by the following bounding coordinates.
0.46
3500 K
0.42
4000 K
4500 K 27E
30E
0.40
5000 K 35E
CCy
6500 K 45E
0.36
50E
0.34 57E
65E
0.32
0.30
0.29 0.31 0.33 0.35 0.37 0.39 0.41 0.43 0.45 0.47 0.49
CCx
0.355
ANSI 6500 K
0.345
0.335
1EC
CCy
1EB1G0
1ED
0.325
1EA
0.315
0.305
0.29 0.30 0.31 0.32 0.33 0.34
CCx
6500 K 1G0,
5-step 65E 1EA, 1EB, 0.3123 0.3282 0.01115 0.00475 58.57
1EC, 1ED
Copyright © 2017 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® is a registered trademark and the Cree logo and J Series™ are trademarks of Cree,
Inc. UL® and the UR logo are registered trademarks of UL LLC. J Series products are marketed by Cree, Inc. for the benefit of Cree Venture LED Company Limited.
20
J Series™ 3030 LED
0.37
ANSI 5700 K
0.36
0.35 2EC
CCy
2EB
2G0
0.34 2ED
2EA
0.33
0.32
0.305 0.315 0.325 0.335 0.345 0.355
CCx
5700 K 2G0,
5-step 57E 2EA, 2EB, 0.3287 0.3417 0.01243 0.00533 59.09
2EC, 2ED
Copyright © 2017 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® is a registered trademark and the Cree logo and J Series™ are trademarks of Cree,
Inc. UL® and the UR logo are registered trademarks of UL LLC. J Series products are marketed by Cree, Inc. for the benefit of Cree Venture LED Company Limited.
21
J Series™ 3030 LED
0.38
ANSI 5000 K
0.37
3EC
0.36
3EB
3G0
CCy
3ED
0.35
3EA
0.34
0.33
0.32 0.33 0.34 0.35 0.36 0.37
CCx
5000 K 3G0,
5-step 50E 3EA, 3EB, 0.3447 0.3553 0.01370 0.00590 59.62
3EC, 3ED
Copyright © 2017 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® is a registered trademark and the Cree logo and J Series™ are trademarks of Cree,
Inc. UL® and the UR logo are registered trademarks of UL LLC. J Series products are marketed by Cree, Inc. for the benefit of Cree Venture LED Company Limited.
22
J Series™ 3030 LED
0.39
ANSI 4500 K
0.38
4EC
0.37
4EB
4G0
CCy
4ED
0.36
4EA
0.35
0.34
0.345 0.35 0.355 0.36 0.365 0.37 0.375 0.38
CCx
4500 K 4G0,
5-step 45E 4EA, 4EB, 0.3613 0.3670 0.01260 0.00563 57.58
4EC, 4ED
Copyright © 2017 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® is a registered trademark and the Cree logo and J Series™ are trademarks of Cree,
Inc. UL® and the UR logo are registered trademarks of UL LLC. J Series products are marketed by Cree, Inc. for the benefit of Cree Venture LED Company Limited.
23
J Series™ 3030 LED
0.41
ANSI 4000 K
0.40
0.39
5EC
5EB 5GA
CCy
0.38
5GB 5ED
0.37 5EA
0.36
0.35
0.36 0.37 0.38 0.39 0.40 0.41
CCx
Copyright © 2017 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® is a registered trademark and the Cree logo and J Series™ are trademarks of Cree,
Inc. UL® and the UR logo are registered trademarks of UL LLC. J Series products are marketed by Cree, Inc. for the benefit of Cree Venture LED Company Limited.
24
J Series™ 3030 LED
0.42
ANSI 3500 K
0.41
0.40 6EC
6EB
6GA
CCy
0.39
6GB
6ED
6EA
0.38
0.37
0.36
0.385 0.395 0.405 0.415 0.425 0.435
CCx
Copyright © 2017 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® is a registered trademark and the Cree logo and J Series™ are trademarks of Cree,
Inc. UL® and the UR logo are registered trademarks of UL LLC. J Series products are marketed by Cree, Inc. for the benefit of Cree Venture LED Company Limited.
25
J Series™ 3030 LED
0.435
ANSI 3000 K
0.425
0.415
7EC
7EB
7GA
CCy
0.405
7GB
7ED
0.395 7EA
0.385
0.375
0.41 0.42 0.43 0.44 0.45 0.46
CCx
Copyright © 2017 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® is a registered trademark and the Cree logo and J Series™ are trademarks of Cree,
Inc. UL® and the UR logo are registered trademarks of UL LLC. J Series products are marketed by Cree, Inc. for the benefit of Cree Venture LED Company Limited.
26
J Series™ 3030 LED
ANSI 2700 K
0.43
0.42
8EB 8EC
8GA
CCy
0.41
8GB
8ED
8EA
0.40
0.39
0.38
0.43 0.44 0.45 0.46 0.47 0.48 0.49
CCx
Chromaticity
0.44 Center Point Major Axis Minor Axis Rotation Angle
CCT MacAdam Ellipse Included Bins
Group x y a b (°)
Copyright © 2017 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® is a registered trademark and the Cree logo and J Series™ are trademarks of Cree,
Inc. UL® and the UR logo are registered trademarks of UL LLC. J Series products are marketed by Cree, Inc. for the benefit of Cree Venture LED Company Limited.
27
J Series™ 3030 LED
In testing, Cree Venture has found J Series 3030 LEDs to be compatible with JEDEC J-STD-020C, using the parameters listed below. As
a general guideline, Cree Venture recommends that users follow the recommended soldering profile provided by the manufacturer of the
solder paste used, and therefore it is the lamp or luminaire manufacturer’s responsibility to determine applicable soldering requirements.
Note that this general guideline may not apply to all PCB designs and configurations of reflow soldering equipment.
tP
TP Critical Zone
TL to TP
Ramp-up
TL tL
Temperature
Tsmax
Tsmin
ts Ramp-down
Preheat
25
t 25˚C to Peak
Time
Time (tp) Within 5 °C of the Specified Classification Temperature (Tc) 30 seconds max.
Note: All temperatures refer to the topside of the package, measured on the package body surface.
Copyright © 2017 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® is a registered trademark and the Cree logo and J Series™ are trademarks of Cree,
Inc. UL® and the UR logo are registered trademarks of UL LLC. J Series products are marketed by Cree, Inc. for the benefit of Cree Venture LED Company Limited.
28
J Series™ 3030 LED
Notes
Measurements
The luminous flux, radiant power, chromaticity, forward voltage and CRI measurements in this document are binning specifications only
and solely represent product measurements as of the date of shipment. These measurements will change over time based on a number
of factors that are not within Cree Venture’s control and are not intended or provided as operational specifications for the products.
Calculated values are provided for informational purposes only and are not intended or provided as specifications.
Lumen Maintenance
Cree Venture uses standardized IES LM-80-08 and TM-21-11 methods for collecting long-term data and extrapolating LED lumen
maintenance. For information on the specific LM-80 data sets available for this LED, refer to the public LM-80 results document.
Please read the Thermal Management application note for details on how thermal design, ambient temperature, and drive current affect
the LED junction temperature.
Moisture Sensitivity
Cree Venture recommends keeping J Series 3030 LEDs in the provided, resealable moisture-barrier packaging (MBP) until immediately
prior to soldering. Unopened MBP that contains J Series 3030 LEDs does not need special storage for moisture sensitivity.
Once the MBP is opened, J Series 3030 LEDs should be handled and stored Moisture Maximum Percent Relative Humidity
Sensitivity Temp.
as MSL 3a per JEDEC J-STD-033, meaning they have limited exposure time Level 50% 60% 70% 80% 90%
before damage to the LED may occur during the soldering operation. The Level 3 35 ºC 8 5 1 0.5 0.5
table on the right specifies the maximum exposure time in days depending Level 3 30 ºC 11 7 1 1 1
on temperature and humidity conditions. LEDs with exposure time longer Level 3 25 ºC 14 10 2 1 1
than the specified maximums must be baked according to the baking Level 3 20 ºC 20 13 2 1 1
Baking Conditions
It is not necessary to bake all J Series 3030 LEDs. Only the LEDs that meet all of the following criteria must be baked:
LEDs should be baked at 60 ºC for 24 hours. LEDs may be baked in the original reels. Remove LEDs from the MBP before baking. Do
not bake parts at temperatures higher than 60 ºC. This baking operation resets the exposure time as defined in the Moisture Sensitivity
section above.
Copyright © 2017 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® is a registered trademark and the Cree logo and J Series™ are trademarks of Cree,
Inc. UL® and the UR logo are registered trademarks of UL LLC. J Series products are marketed by Cree, Inc. for the benefit of Cree Venture LED Company Limited.
29
J Series™ 3030 LED
Notes - Continued
RoHS Compliance
The levels of RoHS restricted materials in this product are below the maximum concentration values (also referred to as the threshold
limits) permitted for such substances, or are used in an exempted application, in accordance with EU Directive 2011/65/EC (RoHS2), as
implemented January 2, 2013. RoHS Declarations for this product can be obtained from your Cree representative or from the Product
Ecology section of the Cree website.
Vision Advisory
WARNING: Do not look at an exposed lamp in operation. Eye injury can result. For more information about LEDs and eye safety, please
refer to the LED Eye Safety application note.
Copyright © 2017 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® is a registered trademark and the Cree logo and J Series™ are trademarks of Cree,
Inc. UL® and the UR logo are registered trademarks of UL LLC. J Series products are marketed by Cree, Inc. for the benefit of Cree Venture LED Company Limited.
30
J Series™ 3030 LED
Mechanical Dimensions
3.0
Anode
0.15
Side
3.0
Ø2.6
Cathode 0.1
Mark 0.2
Tie Bars
0.52
1.428 0.69
2.2
Cathode Anode
2.12 0.48
1.60 0.55
1.30 0.80
0.60 0.40
0.30
1.90
2.40 0.50
Copyright © 2017 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® is a registered trademark and the Cree logo and J Series™ are trademarks of Cree,
Inc. UL® and the UR logo are registered trademarks of UL LLC. J Series products are marketed by Cree, Inc. for the benefit of Cree Venture LED Company Limited.
31
J Series™ 3030 LED
All Cree Venture carrier tapes conform to EIA-481D, Automated Component Handling Systems Standard.
All dimensions in mm.
Anode side
User feed direction
Start End
Trailer
Leader Cathode side More than
More that 400 mm Capacity per reel 160 mm unloaded
unloaded tape 5,000 LEDs tape
Leader End
Upper band
Carrier tape
Ø 13 mm
Ø 165.1 mm (6.5 inch)
Copyright © 2017 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® is a registered trademark and the Cree logo and J Series™ are trademarks of Cree,
Inc. UL® and the UR logo are registered trademarks of UL LLC. J Series products are marketed by Cree, Inc. for the benefit of Cree Venture LED Company Limited.
32
Product Data Sheet 3030– Mid-Power LED
Product Data Sheet 3030– Mid-Pow
J Series™ 3030 LED
Packaging Information(包装信息)
包装)Packaging Packaging Information(包装信息)
eel Packaging(卷带包装)
Unpackaged Reel
Packaged Reel
Desiccant Bag
Vacuum-Sealed Bag
Humidity Card
Copyright © 2017 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® is a registered trademark and the Cree logo and J Series™ are trademarks of Cree,
Inc. UL® and the UR logo are registered trademarks of UL LLC. J Series products are marketed by Cree, Inc. for the benefit of Cree Venture LED Company Limited.
33
J Series™ 3030 LED
Packaging - Continued
J Series 3030 LEDs are packaged in boxes for shipment. Box sizes and the number of reels per box are as follows.
Each box has at least one label (shown as a white square in the diagrams below) showing the order code, lot number, quantity, and
product parameters.
Box 1 Box 2
Box 3 Box 4
Copyright © 2017 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® is a registered trademark and the Cree logo and J Series™ are trademarks of Cree,
Inc. UL® and the UR logo are registered trademarks of UL LLC. J Series products are marketed by Cree, Inc. for the benefit of Cree Venture LED Company Limited.
34
TWIST-LOCK PHOTOCONTROL RECEPTACLE
Conforms ANSI C136.41
Rotatable
JL-240TL-XA-1412R7P
JL-240TL-XA
Rear Cover
Rear Seat
Product Summary
The entire JL-240 series twist-lock receptacles were designed for the lanterns those intended to have an
ANSI C136.10-2006 receptacle to fit a twist-lock photocontrol. This series conform newly published ANSI
C136.41-2013 to allow a LED lamp multi-controlled through the receptacle, and obtained cRUus
certificates under UL file E188110.
This item JL-240TL-XA1412R7P offers 4 gold-plated low voltage pads on the top surface to fit
photocontrol has ANSI C136.41 conforming spring contacts, and offers 4 corresponding wires at rear back
for signal connection.
This item offers 360 degree rotation limiting feature to conform ANSI C136.10-2010 requirements. After
simply fit its Rear Seat onto a lamp housing with 2 screws, the assembled receptacle body can be handy
snapped on the Seat for mechanical installation completed. Rotation will be held during photocontrol
installation or removal by pressure applied vertically.
This item has multiple gaskets built-in already for IP65 protection.
Shanghai Long-Join Electronics Co., Ltd. ©2000-2015 EC240TLvF01E
No.398, Nan Wenzao Road, Shanghai 200443, China www.LONGJOIN.com
Technical Data
Model No. JL-240TL-XA1412R7P
Power Volt Range 0~480VAC
Rated Frequency 50/60Hz
Power Loading 15A max. / AWG#16: 10A max.
Signal Loading 30VDC, 0.25A max.
Ambient Temperature External* -40℃ ~ +70℃
Receptacle UV stabilized Polycarbonate (UL94 5VA)
Power Contact Solid Brass
Signal Contact Nickel plated Phosphor Bronze, Gold plated
Material Gasket Thermal Elastromer (UL94 V-0)
Power Lead 14AWG, AWM1015
Signal Lead 18AWG, AWM1015
Leads 12”
Overall Dimensions (mm) 69Dia.x 38
* Ambient Temperature rating is for the receptacle body outside luminaire.
Installation
Disconnect power; wire the receptacle according to the diagram below. An arrow indicating
NORTH on the top of the receptacle is used to assist correct direction. Push the photocontrol on
and turn it clockwise to lock into the receptacle.
Reference Documents
ANSI C136.10-2010 American National Standard for Roadway and Area Lighting Equipment – Locking-Type
Photocontrol Devices and Mating Receptacles – Physical and Electrical Interchangeability and
Testing
ANSI C136.41-2013 American National Standard For Roadway and Area Lighting Equipment – Dimming
Control Between an External Locking Type Photocontrol and Ballast or Driver