Documentos de Académico
Documentos de Profesional
Documentos de Cultura
Dialogo Science Fair
Dialogo Science Fair
-Jairo: El nombre de nuestro proyecto es: Rope Car Toy, con el cual queremos hablar sobre la
Energía Potencial Elástica.
-Valery: Es energía almacenada que resulta de aplicar una fuerza para deformar un objeto elástico.
-Jairo: La energía queda almacenada hasta que se quita la fuerza y el objeto elástico regresa a su
forma original, haciendo un trabajo en el proceso.
-Valery: También podemos observar la Formula para expresar La Energía Potencial Elástica.
“Ahora vamos a desarrollar nuestro proyecto”
-Valery: El Primer paso es medir 8 cm de distancia entre las paletas para unir las dos paletas de
una punta y luego pegar un palillo de 2 cm.
-Jairo: Luego tomamos nuestras pajillas y las pegamos en los extremos de las paletas para poder
colocar las llantas de nuestro Carro de Cuerda de Juguete.
-Valery: Luego Tomamos los palillos de 6 y 9 cm y colocamos las chapas en los extremos y las
colocamos dentro de las pajillas y sellamos con silicón.
-Jairo: Luego vamos a colocar el hule grande en la punta de nuestro carro y pegamos con silicón,
los hules pequeños los colocamos en las llantas traseras de nuestro carro.
-Valery: Para terminar pegamos el ultimo palillo de 2 cm que tenemos y lo pegamos en la parte
trasera de nuestro carro, también reforzamos el peso con 2 baterías que pegaremos en la parte
trasera de nuestro carro.
-Jairo: The name of our project is: Rope Car Toy with which we want to talk about Elastic Potential
Energy.
-Valery: It is stored energy that results from applying a force to deform an elastic object.
-Jairo: The energy is stored until the force is removed and the elastic object returns to its original
shape, doing work in the process.
-Valery: We can also observe the Formula to express Elastic Potential Energy.
“Now we are going to develop our project”
-Jairo: To make our Rope Car Toy we will need the following:
2 Palettes
2 chopsticks of 2 cm
1 chopstick of 6 cm
1 chopstick of 9 cm
1 Straw of 5 cm
2 straws of 1 cm
2 Batteries
Hot silicone
4 bottle caps
2 small oilcloths
1 large oilcloth
-Valery: The first step is to measure the 8 cm distance between the blades to join the two blades
at one end and then glue a 2 cm chopstick.
-Jairo: Then we take our straws and glue them to the ends of the palettes to be able to place the
tires of our Rope Car Toy.
-Valery: Then we take the 6 and 9 cm chopsticks and place the caps at the ends and place them
inside the straws and seal with silicone.
-Jairo: Then we are going to place the large rubber on the end of our car and glue it with silicone,
we will place the small rubber on the rear tires of our car..
-Valery: To finish we glue the last 2 cm chopsticks that we have and glue it to the back of our car,
we also reinforce the weight with 2 batteries that we will glue to the back of our car.
-Jairo: And this is how we have our toy rope car ready.
Thank you for your attention, now "Join us to play"