Documentos de Académico
Documentos de Profesional
Documentos de Cultura
REVISIÓN: 1.0
INGENIERÍA DE REDES - GPON
1
CENTRO DE OPERACIONES DE LA RED
REVISIÓN: 1.0
INGENIERÍA DE REDES - GPON
2.- Se crea vlan (modo smart) y interface vlan dentro de la OLT , similar a un router huaweí:
CMP1_HUA_5800_PON_A01_01>enable
CMP1_HUA_5800_PON_A01_01#config
CMP1_HUA_5800_PON_A01_01(config)#
<Vlanif2503>
interface Vlanif2503
description "##CLIENTE##10300006384# TECHNICAL AID SRL"
ip address 190.183.59.57 255.255.255.248
- se debe pasar vlan por ont-lineprofile gpon profile-id 21, dentro de alli aplicar el
comando gem mapping siguiendo la secuencia existente en la OLT, se resaltan
comandos y aplicar commit al final :
ont-lineprofile gpon profile-id 21 profile-name "ESPECIALES2"
tcont 1 dba-profile-id 90
tcont 2 dba-profile-id 100
tcont 3 dba-profile-id 110
gem add 1 eth tcont 1
gem add 2 eth tcont 2
gem add 3 eth tcont 3
gem mapping 1 0 vlan 559
gem mapping 2 0 vlan 508
2
CENTRO DE OPERACIONES DE LA RED
REVISIÓN: 1.0
INGENIERÍA DE REDES - GPON
3.- Una vez conectada la onu, se debe eliminar la vlan no- autho desde el BDP igual como se
hace con los servicios AFIP que se explicó en el instructivo anterior. Una vez hecho eso,
tomaré como ejemplo la siguiente onu, tener presente el número de serial y interface ya que
se usará siempre como referencia:
3
CENTRO DE OPERACIONES DE LA RED
REVISIÓN: 1.0
INGENIERÍA DE REDES - GPON
- se debe eliminar onu primero para que te deje hacer los cambios de ont-lineprofile-id
ont delete 2 16
- Luego aplicar los siguientes comandos
ont add 2 16 sn-auth "48575443D50B63A3" omci ont-lineprofile-id 21 ont-srvprofile-id
4 desc
ont port native-vlan 2 16 eth 1 vlan 2503 priority 0
ont port route 2 16 eth 1 disable
ont port native-vlan 2 16 eth 2 vlan 2503 priority 0
ont port route 2 16 eth 2 disable
ont port native-vlan 2 16 eth 3 vlan 2503 priority 0
ont port route 2 16 eth 3 disable
ont port native-vlan 2 16 eth 4 vlan 2503 priority 0
ont port route 2 16 eth 4 disable
- Fuera de la interface gpon, Se debe colocar vlan en service port, con el bandwith
indicado:
service-port 16365 vlan 2503 gpon 0/1/2 ont 16 gemport 3 multi-service user-vlan 2503
tag-transform translate inbound traffic-table index 70 outbound traffic-table index 201
4
CENTRO DE OPERACIONES DE LA RED
REVISIÓN: 1.0
INGENIERÍA DE REDES - GPON