Documentos de Académico
Documentos de Profesional
Documentos de Cultura
swItemId=MTX_2a4f6e276e9d4eac9d3716e50b
Controladores y software
* RECOMMENDED * RESTful Interface Tool
Al realizar una descarga, usted acepta las Cl�usulas y Condiciones del Acuerdo de
licencia de software Hewlett Packard Enterprise.
Nota: Ciertos software requieren una garant�a v�lida, un contrato de soporte real
con Hewlett Packard Enterprise o una cuota de licencia.
==============================================
Descripci�n
Instrucciones
de instalaci�n
===================================================================================
=====================
e4e8d53c3d92dabb3d16013680f9a76f4967cf9a09eecb296fe46ba129f1ff0a ilorest-3.1.1.0-
7.x86_64.msi
Requisito de reinicio:
El reinicio es opcional despu�s de la instalaci�n.
Las actualizaciones ser�n efectivas despu�s del reinicio.
La estabilidad del hardware se mantendr� sin reiniciar.
Instalaci�n:
Para verificar la firma digital HPE SHA256 Authenticode, siga los siguientes pasos:
1. Descargue <nombre de archivo> .msi en un sistema que ejecute una versi�n
compatible del
sistema operativo Microsoft Windows Server. Al descargar este archivo, acepta los
t�rminos
de licencia del Acuerdo de licencia de HPE v1.pdf, que se enumeran en el campo
'Licencia'.
2. Haga clic con el bot�n derecho en el nombre del archivo y luego seleccione
Propiedades.
3. Cuando aparezca la ventana Propiedades, haga clic en la pesta�a Firma digital.
4. Seleccione la primera entrada en la Lista de firmas y haga clic en el bot�n
Detalles.
5. El estado de la firma se mostrar� en la parte superior del cuadro de di�logo
Detalles.
6. Si el mensaje de firma indica que "Esta firma digital es correcta",
entonces el paquete de firmware se autentica como un paquete de HPE.
7. Si aparece el mensaje "Esta firma digital no es correcta".
pantallas, luego haga lo siguiente: una. No implemente el firmware.
B. Descargue el firmware por segunda vez y verifique la firma nuevamente.
Si la firma no es correcta, comun�quese con el Soporte t�cnico de HPE.
===================================================================================
=====================
To ensure the integrity of your download, HPE recommends verifying your results
with this SHA-256 Checksum value:
e4e8d53c3d92dabb3d16013680f9a76f4967cf9a09eecb296fe46ba129f1ff0a ilorest-3.1.1.0-
7.x86_64.msi
Reboot Requirement:
Reboot is optional after installation. Updates will be effective after reboot.
Hardware stability will be maintained without reboot.
Installation:
To verify the HPE SHA256 Authenticode digital signature, do the following steps:
1. Download <file name>.msi to a system running a supported version of Microsoft
Windows Server OS. By downloading this file, you are agreeing to the license terms
in HPE License Agreement v1.pdf, listed in the 'License' field.
2. Right-click the filename then select Properties
3. When the Properties window displays, click the Digital Signature tab
4. Select the first entry in the Signature List and click the Details button.
5. The signature status will display at the top of the Details dialog.
6. If the signature message states that �This digital signature is OK.�, then
the firmware package is authenticated as an HPE package
7. If the message �This digital signature is not OK.� displays, then do the
following:
a. Do not deploy the firmware.
b. Download firmware a second time and verify the signature again. If
the signature is not OK, then contact HPE Technical Support.
Execute the file <filename>.msi and follow onscreen instructions to finish the
installation.
After the driver installation is complete, please restart the server.
The wizard will guide you through the installation and the ilorest utility is now
available to use.
=================================================================================
evisar en el SPP
cp041816.exe - no esta - requiere cotrato
cp046021.exe - no esta - publico