Documentos de Académico
Documentos de Profesional
Documentos de Cultura
cabezales”, esta impresora fue adquirida hace como 5 años y hasta ahora se pudo armar.
La duda al armar son las siguientes y se anexará fotos y videos de su ensamble final.
This message is for the purpose of being able to resolve some doubts when assembling the "3-head 3D
Printer" machine, this printer was acquired about 5 years ago, but along these years it couldn't be
assembled until now.
我对组装有一些疑问:
这是所提供文件标题的附件照片。
2) En el archivo “plataform assamble” se muestra una plataforma muy diferente a la que nos llegó,
la plataforma que llego posee 3 puertos. De todas formas, se hicieron los pasos
correspondientes como lo define el manual, Se corto el circuito en el termistor, y se conectó en
el puerto 2 y 3 como muestra la tabla, para 24 v, ¿estas acciones fueron correctas
2) In the file "platform assamble" a different platform is shown than the one that arrived, the
platform that arrived has 3 ports. Anyway, the corresponding steps were made as defined in the
manual, The circuit was cut in the thermistor, and it was connected to port 2 and 3 as the table
shows, for 24 v, were these actions correct?
3) En el archivo “Tricolor” se especifica que en el eje z los dos motores se conectan en SERIE. ¿Esto
es correcto?
3) In the file "Tricolor" it is specified that the two motors are connected in SERIES on the z axis. Is
this correct?
4)我可以使用什么软件在打印机上进行打印?
5) ¿Para hacer la transferencia de datos se hace por la tarjeta maestra o la tarjeta esclava?
5) Is the data transfer done by the master board or the slave board
5)数据传输是由主板还是从板完成的?
6) La transferencia de datos se hace por cable USB, tarjeta SD o algun otro medio?
6)Is the data transfer done by USB cable, SD card or other media?