Documentos de Académico
Documentos de Profesional
Documentos de Cultura
Bayonetas Sen - Ret PDF
Bayonetas Sen - Ret PDF
Las características e identificación de este producto se describen en el documento anexo, que hace parte integral del
presente CERTIFICADO. Este documento contiene 2 página(s).
The characteristics and identification of this product are described in the attached document, which is an integral part of this
CERTIFICATE
Fabricado por:
Manufactured by:
JUAN Firmado
digitalmente
ROJAS DUQUE
Fecha:
Juan Pablo Rojas Duque
Gerente CIDET Certificación DUQUE 2019.02.13
17:48:29 -05'00'
Certification CIDET Manager
CIDET realiza la verificación y el seguimiento a las características del producto que dieron origen a esta certificación.
Las novedades y vigencia de este certificado pueden ser consultadas en la página www.cidet.org.co
CIDET makes the verification and follow up the characteristics of the product that gave rise to this certification.
On page www.cidet.org.co, you can find new and validity of this certificate.
Medellín: Carrera 46 No. 56-11 (Av. Oriental) Piso 13, Tel: (+ 574) 444 12 11, Fax: (+574) 444 04 60
Página 1 de 2
CERTIFICADO DE CONFORMIDAD DE PRODUCTO Nro. 00819
FECHA DE CERTIFICACIÓN: 09 / 05 / 2001
ÚLTIMA ACTUALIZACIÓN: 13 / 02 / 2019
FECHA DE VENCIMIENTO: 07 / 05 / 2020
ANEXO DE CARACTERÍSTICAS E IDENTIFICACIÓN DE
HERRAJES PARA REDES ELÉCTRICAS
FABRICADOS POR FUNDIHERRAJES DE COLOMBIA LTDA.,
UBICADA EN LA CARRERA 11 51A 44 PARQUE INDUSTRIAL,
SOGAMOSO, BOYACÁ, COLOMBIA
Tipo Bayonetas
Referencia Sencilla, para ángulos y para retenida
Perfiles
Tipo de material
NTC 1920 NTC 1985 Grado 50
% Carbono (Max) 0.26 0.23
% Fósforo (Max) 0.040 0.040
Requisitos químicos % Azufre (Max) 0.050 0.050
% Manganeso - 1.35
% Silicio (Max) 0.40 0.30
% Vanadio - 0.01 – 0.15
% Cobre (Min) 0,20 -
NTC 1985 –
NTC 1920
Tipo de material Grado 50
ksi MPa ksi MPa
Requisitos mecánicos Resistencia a la
58-80 400-550 50 345
tracción
Límite de fluencia 36 250 65 450
Elongación en 2” (%) 21 21 18-21 18-21
NTC 2616 / 2014 y la RESOLUCIÓN 90708 de 2013 del
Referencial
MINISTERIO DE MINAS Y ENERGÍA – RETIE (Numeral 20.20)
Atentamente,