Documentos de Académico
Documentos de Profesional
Documentos de Cultura
TABASCO
División Académica de Ingeniería y
Arquitectura
Profesor: Villegas Pérez Carlos
Presenta:
Luis Fernando Ventura Alvarez
Carrera: Ing. Civil
Otras normas:
ASTM C924M Standard practice for testing concrete pipe sewer lines by low-pressure air
test method (metric)
ASTM D1785 Poly (Vinyl Chloride) (PVC) Plastic Pipe, Schedules 40, 80, and 120.
ASTM D2241 Poly (Vinyl Chloride) (PVC) Pressure-Rated Pipe (SDR PR Series).
ASTM D3034 Type PSM Poly (Vinyl Chloride) (PVC) Sewer Pipe and Fittings.
ASTM F679 Poly (Vinyl Chloride) (PVC) Large-Diameter Plastic Gravity Sewer Pipe and
Fittings.
ASTM F714 Standard Specification for Polyethylene (PE) Plastic Pipe (SDR-PR) Based on
Outside Diameter.
ASTM F794 Poly (Vinyl Chloride) (PVC) Profile Gravity Sewer Pipe and Fittings Based on
Controlled Inside Diameter.
ASTM F894 Standard Specification for Polyethylene (PE) Large Diameter Profile Wall
Sewer and Drain Pipe.
ASTM F949 Poly (Vinyl Chloride) (PVC) Corrugated Sewer Pipe with a Smooth Interior and
Fittings.
ASTM F1803 Standard Specification for Poly (Vinyl Chloride) (PVC) Closed Profile Gravity
Pipe and Fittings Based on Controlled Inside Diameter.
ISO 1452-1 Plastics piping systems for water supply and for buried and above-ground
drainage and sewerage under pressure-unplasticized poly (vinyl chloride) (PVC-U).
ISO 2531:2009, Ductile iron pipes, fittings, accessories and their joints for water
applications.
ISO 4427-5 Plastics Piping Systems Polyethylene (PE) pipes and fittings for water supply-
Part 5 Fitness for propose of the system.
ISO 4435 Plastic piping systems for non-pressure underground drainage and sewerage-
unplasticized poly(vinyl chloride) (PVC).
ISO 21138-1 Plastic piping systems for non-pressure underground drainage and sewerage-
Structured-wall piping systems of unplasticized poly (vinyl chloride) (PVC-U),
polypropylene (PP) and polyethylene (PE).
ISO 21138-2 Plastics piping systems for non-pressure underground drainage and
sewerage-Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U),
polypropylene (PP) and polyethylene (PE)-Part 2: Pipes and fittings with smooth external
surface, Type A.
ISO 21138-3 Plastics piping systems for non-pressure underground drainage and
sewerage-Structured-wall piping systems of unplasticized poly (vinyl chloride) (PVC-U),
polypropylene (PP) and polyethylene (PE)-Part 3: Pipes and fittings with non-smooth
external , Type B.