Documentos de Académico
Documentos de Profesional
Documentos de Cultura
ABSTRAC METODOLOGÍA
The RMS voltage, or the mean square of
Para el desarrollo de la práctica,
the root (also called the effective voltage),
inicialmente hicimos el montaje del
is a method of denoting a sine wave
circuito, con los materiales anteriormente
voltage (AC waveform) as an equivalent
mencionados. Teniendo como resultado la
voltage that represents the DC voltage
siguiente imagen.
value that It will produce the same
heating or power dissipation effect on the
circuit, as this AC voltage.
In other words, the waveform is an AC
waveform, but the RMS value allows this
waveform to be specified as DC, because
it is the equivalent DC voltage that
delivers the same amount of energy to a
load in a circuit such as The AC signal is
Ilustración 1 montaje circuito
on its cycle.
Luego de realizar el montaje, procedemos
INTRODUCCIÓN a conectar el osciloscopio, donde
podemos observar las siguientes señales.
El presente informe muestra el desarrollo
de la practica #1 de la asignatura potencia Voltaje AB rms: del tap central hasta la
1 en donde calculamos el valor de VRMS fuente
e IRMS, entre los puntos A y B de un
circuito que consta de resistencias de
potencia de 470 ohm , dos diodos ideales,
un transformador de 14 v con tap central
y una fuente de 11v , luego del montaje,
se toman las respectivas mediciones, para
compararlas con los cálculos y así poder
entender y hacer un análisis del
funcionamiento de nuestro circuito.
Ilustración 2voltaje AB rms
VXA Y VYA: del diodo1 a la fuente
RESULTADOS CALCULADOS
CONCLUSIONES