Documentos de Académico
Documentos de Profesional
Documentos de Cultura
DETECCION DE GEOPRESIONES
2.1 INTRODUCCIÓN
EJERCICIO #1 Whilst drilling the 12 1/4" hole section of a well the mudloggers were
recording the data as shown in the table below. Plot the d and dc exponent and
determine whether there are any indications of an overpressured zone.
a. If an overpressured zone exists, what is the depth of the top of the transition zone.
b. Use the Eaton equation to estimate the formation pressure at 8550 ft and 8600 ft.
Assume a normal formation pressure of 0.465 psi/ft. an overburden gradient of 1.0
psi/ft.
UNIDAD II
DETECCION DE GEOPRESIONES
2.8.1 EJERCICIOS DE PRESION DE PORO O FORMACION
UNIDAD II
DETECCION DE GEOPRESIONES
De los métodos mencionados, los mas utilizados son el de Hubbert & Willis y el
de Ben Eaton.
UNIDAD II
DETECCION DE GEOPRESIONES
Pff= 13 𝑃𝑆 + 2𝑃𝐹
Pff = Presión de Fractura Mínima [psi]; PS = Presión de Sobrecarga [psi]
PF = Presión de Formación [psi]
Una evaluación exacta de los trabajos de cementación del casing así como de la
formación es de extrema importancia durante la perforación de un pozo.
A
UNIDAD II
DETECCION DE GEOPRESIONES