Documentos de Académico
Documentos de Profesional
Documentos de Cultura
Presentado por
Agosto de 2019
INGENIERIA CIVIL
GIRARDOT – CUNDINAMARCA
RESUMEN
Con proporcional quiero decir que si se aplica el doble del esfuerzo de compresión se
tendrá el doble de la deformación unitaria y al dividirlas entre sí se obtendrá siempre el
mismo módulo de elasticidad.
Para que la ley tenga efecto los materiales deben mantenerse en su rango elástico de
trabajo; es decir, las cargas no deben ser demasiado grandes que provoquen una
deformación muy grande o la ruptura del material.
ABSTRACT
By proportional, I mean that if twice the compression stress is applied, we will have
twice the unit strain and dividing them together will always give us the same modulus of
elasticity.
For the law to take effect, materials must be maintained in their elastic range of work;
that is, the loads must not be too large that cause a very large deformation or rupture of
the material.
GENERAL:
ESPECIFICO:
F = K DL
K = F/DL = mg/DL = 2 * 9,8 / 0,01 = 4 * 9,8 / 0,02 = 6 * 9,8 / 0,03 = 1960 N/m (Sanchez,
2019)