COMPORTAMIENTO SISMICO DE UNA ESTRUCTURA UTILIZANDO
PANELESPREFABRICADOS DE MADERA CONTRALAMINADA
Investigación l
Yinessa Carrasco Arenas
Carlos Alberto Ríos Córdoba
UNIVERSIDAD TECNOLOGICA DEL CHOCÓ “Diego Luís Córdoba”
Ingeniería Ingeniería civil Quibdó 2019 ANÁLISIS DEL COMPORTAMIENTO SÍSMICO DE ESTRUCTURAS CON PANELES PREFABRICADOS DE MADERA CONTRALAMINADA Autores: BEATRIZ GONZALEZ RODRIGO, ALBERTO FRAILE DE LERMA, JUAN CARLOS MOSQUERA FEIJOO Resumen La creciente incorporación de paneles de madera contralaminada (CLT) como material de construcción sostenible para edificación en altura requiere un estudio en profundidad de su comportamiento ante acciones accidentales sísmicas. La investigación actual se está centrando en el análisis de la respuesta de las uniones ante cargas monótonas crecientes y cíclicas, ya que estas uniones proporcionan activamente resistencia, rigidez, estabilidad y ductilidad. Las curvas obtenidas de estos análisis están siendo incorporadas en los modelos numéricos con el fin de poder predecir el comportamiento de edificios en altura de CLT. Este documento presenta un resumen actualizado sobre esta materia, analizando y clasificando los métodos actuales de cálculo de estas estructuras.
EL PANEL DE MADERA CONTRALAMINADA
Autor: Amaya Álvarez del Río RESUMEN Este estudio se centra en el panel contralaminado de madera, en relación a su uso como cerramiento en España, y su nivel de sostenibilidad y eficiencia. Se abordaran estos dos aspectos, a través de un análisis del impacto ambiental durante todo el ciclo de vida de los cerramientos. Por ello, nos centraremos en el panel como cerramiento, y como elemento eficiente, y sostenible, desde su fabricación hasta su papel en el edificio terminado. Esta visión global del impacto que produce, resultara de gran utilidad para conocer mejor este sistema constructivo bastante desconocido en nuestro país. Para su análisis, se ha propuesto un edificio de madera contralaminada y calculado su impacto, para compararlo después con el mismo modulo, construido con los cerramientos convencionales que predominan en nuestro país.
LA MADERA CONTRALAMINADA COMO ALTERNATIVA EN SISTEMAS DE
BAJA ENERGIA ESTRUCTURAL AUTOR MARIO FERNANDEZ FORCADA RESUMEN La mayor parte de las estructuras utilizadas en edificación se construyen con hormigón armado y acero estructural. El empleo masivo de estos materiales supone un derroche de energía. Teniendo en cuenta que la mayor parte de la carga soportada en los edificios de viviendas es debida a su peso propio, surge la oportunidad para otros materiales más ligeros que, igualmente cumpliendo con las especificaciones normativas actuales, tienen una menor demanda de energía para su incorporación a la obra. La madera contralaminada es una gran opción frente a los sistemas estructurales convencionales.
“DISEÑO DE LOSAS DE MADERA CONTRALAMINADA
AUTOR: VALESKA JASMINE ABURTO SOLIS RESUMEN En los últimos años en Europa y América del norte, los productos de madera contralaminada (CLT), se han vuelto muy comunes en aplicaciones de la ingeniería en madera, pues poseen ventajas que los hacen más competitivos frente a productos de otros materiales utilizados en la construcción. Con el fin de ofrecer servicios integrales y seguros, se han desarrollado numerosos métodos de diseño de CLT, sin embargo, en Chile este tipo de laminación de la madera no es muy conocido, por este motivo, el objetivo principal de esta tesis es diseñar losas de madera contralaminada generando tablas de pre-diseño. Para lograrlo, se utilizaron datos experimentales y valores de las propiedades de la madera, tomados de la norma NCh1198. El procedimiento de diseño que se utilizó en este trabajo, es el que se encuentra en el Eurocódigo5. Debido a que la fabricación de estos paneles tiene ciertas restricciones de tamaño, por peso y condiciones de montaje, se hizo necesario buscar mecanismos de conexión entre estas placas, obteniéndose distintas soluciones de conexión y tipos de fijaciones.
DESEMPEÑO SÍSMICO DEL SISTEMA CONSTRUCTIVO TIPO BALLOON EN
EDIFICIOS DE MADERA CONTRALAMINADA AUTOR: JOSÉ NICOLÁS DURÁN WEISSE RESUMEN En Chile existe abundante materia prima para construir en madera, material que debe aprovechase para obtener los beneficios económicos, ambientales o constructivos que presenta. Una de las soluciones desarrolladas para construir edificaciones más altas es la madera contralaminada o CLT (Cross Laminated Timber), sistema que consiste en tablas de madera apiladas y encoladas en forma cruzada, formando muros compactos. El CLT se ha utilizado en edificios de hasta 10 pisos, con resultados excelentes ante cargas estáticas, aunque en Chile su uso se ve un poco más lejano debido a la alta sismicidad que existe. Dado que las estructuras convencionales de CLT de mediana altura son bastante rígidas, se generan aceleraciones y cortes muy altos, esta investigación busca mejorar la respuesta dinámica de éstas, utilizando el sistema constructivo balloon con disipadores de energía.
THE PANELS OF WOODEN PARTICLES AGGLOMERATED WITH CEMENT: A
PROMISORY PRODUCT FOR THE CONSTRUCTION OF LOW COST HOUSES Author: CARLOS LLERENA P., JOACHIM BOCK Z. ABSTRAC Having in mind the present critical situation of the construction industry, the cement bonded particleboard, a non traditional product which requires as basic raw materials two abundant resources in our country (wood and cement), having excellent properties, using broadly proved technology and at low cost, arises like promising alternative
CROSS LAMINATED TIMBER AS SUSTAINABLE CONSTRUCTION
TECHNOLOGY FOR THE FUTURE Author: Tommaso Scalet ABSTRAC The purpose of this final year project was to investigate and analyse the sustainability performances of cross laminated timber (CLT) construction technology. First the availability of the raw material (timber) was studied comparing the systems of Northern Italy and Finland. Second, the manufacturing process and application of CLT in construction was compared to other traditional construction systems. A central part of the study was the environmental impact of the adhesive used in the production, with a special focus on the emissions in the production, application and disposal phases. Further studies were conducted on how to treat CLT waste material and how to improve and optimize the manufacturing process to reach a complete sustainability of the product
THE SEISMIC BEHAVIOR OF CROSS-LAMINATED-TIMBER COMPOSITE SLAB
IN HIGH-RISE BUILDING Author: xin yin ABSTRAC This paper discusses the seismic performance of Cross-Laminated-Timber (CLT) floor slab in high-rise buildings. Due to its lower ductility and brittle failure mechanisms, CLT shows many advantages that can offer to construction sectors such as CLT walls or floor slabs. Substituting ultra lightweight slab material (CLT) for reinforced concrete floors or roofs can utilize its advantages to strengthen structural capacities. Moreover, the CLT-to-Steel Connection test illustrates that these connection components are sufficiently strong. Besides it can reduce these negative impacts of gravity forces associated with occupied built spaces. Therefore, applying CLT into these tall buildings superstructures where reinforcement concrete frameworks are the primary feasible. In a case study, SAP2000 models (a 24-storey framework) compare variable parameters between Concrete-Steel composite slab and CLT-Steel composite slab during lateral seismic events.
ELASTIC BEHAVIOR OF CROSS LAMINATED TIMBER AND TIMBER PANELS
WITH REGULAR GAPS Authors: L. Franzoni, Arthur Lebée, F. Lyon, Gilles Forêt Abstract In the present paper, the influence of periodic gaps between lamellas of Cross Laminated Timber (CLT) on the panel’s elastic behavior is analyzed by means of a periodic homogenization scheme for thick plates having periodic geometry. Both small gaps, due to the fabrication process of not-gluing lateral lamellas, and wider gaps are investigated. The results obtained with the periodic homogenization scheme are compared to existing closed-form solutions and available experimental data. It appears that the plate bending stiffness can be well predicted with both homogenization and simplified methods, while only the homogenization approach is in agreement with the experimental in-plane and out-of-plane shear behavior. The influence of several properties of CLT lay-up on the mechanical response is pointed out as well.
POTENTIAL OF CROSS LAMINATED TIMBER IN SINGLE FAMILY
RESIDENTIAL CONSTRUCTION Autor: Brad Burback abstract Cross laminated timber (CLT) is a panelized engineered wood product that is gaining popularity in the United States as a structural material for massive timber buildings. CLT is shown to be cost competitive to steel and concrete in large building construction projects, but is seen as uncompetitive for smaller scale projects, especially light frame wood (LFW) residential construction. The purpose of this study is to provide a detailed comparison of the cost to construct a CLT home versus a LFW home to quantify the cost difference between both options in the single family home (SFH) market. Based on a realistic floor plan, three different designs were compared based on cost and construction timeline to determine the realistic cost differences between SFH constructions using LFW or CLT. The final results show that the CLT option results in a 21% increase in total construction cost from the LFW option. While it is difficult to justify this cost increase in Colorado, potential benefit of CLT construction against natural hazards may make a CLT house costeffective for hurricane or tornado prone regions.