ti
oo594
‘Two gram moles of nitrogen are heeted from 50°C to 250°C in a cylinder. What is
‘AH for the process? The heat capacity equation is
G, = 27.32 + 0.6226 x 10°27 ~ 0.0950 x 10-72
‘where Tis in kelvin and G, is in JAg mol)(C).
Calculate the change in enthalpy for 5 kg mol of CO which is cooled from 927°C to
37°C.
Hydrogen sulfide is heated from 77°C to 227°C. What is the enthalpy change due to
the heating?
What is the enthalpy change for acstylene when heated from 37.8°C to 93.3°C?
You are asked to calculate the clectic power required (in KWh) to heat all of an alv-
minum wire (posiioned in a vacuum similar to a light bulb filamest) from 25°C 10
{60°C liquid) 10 be ased in a vapor deposition apparats. The melting poi of Al is
660°C. The wire is 25 mm in diameter and has a length of 5.5 em. (The vapor depo-
sition occurs at temperatures in the vicinity of 900°C),
Dato: Fot Al, C, = 200 + 0.0135 T where T's in K and C, Is in Mg mob\CC). The
Mwion = 10,670 ig mol)C) at 650°C. The density of Alis 19:35 giem.
Calculate the enthalpy change (in 3g mol that takes place in raising the temperature
of 1 kg mol ofthe following gas mixture from SO°C to SSOFC.
‘Component Mol %
cH, »
CH, 2
serra ke aay omer ae as ws mat pals aa
Beco Wiel secre pewms Baa
Boiling point: -sc
Melting point: ~155°C
Latent heat of vaporization: 24,940S/g mol
tent heat of fusion: 7.401 Sg mol
Use the average C, of liquid SO, as: 1.28.Yig mo°C)
Use the average C, of solid SO. as: 0.958 Mg moly°C)
Use the C, of gaseous SO; from Appendix E.