Documentos de Académico
Documentos de Profesional
Documentos de Cultura
Deber Elementos de Máquinas
Deber Elementos de Máquinas
1. Repasar la teoría del Capítulo 6 (Failures resulting from variable loading) del libro Shigley’s Mechanical
Design.
2. A 1-in-diameter solid round bar has a groove 0.1-in deep with a 0.1-in radius machined into it. The bar is
made of AISI 1020 CD steel and is subjected to a purely reversing torque of 1800 lbf · in. For the S-N
curve of this material, let f = 0.9.
a. Estimate the number of cycles to failure
b. If the bar is also placed in an environment with a temperature of 750◦F, estimate the number of cycles
to failure
6. Solve Prob. (5) except include a steady torque of 2500 lbf·in being transmitted through the shaft between
the points of application of the forces.
7. Usando el método deformación-vida (ε-N), estime la vida a fatiga de una viga bi-apoyada de acero con Sut
= 400 MPa, si se sabe que ella tiene sección rectangular de base b = 20 mm y altura h = 10 mm, longitud
L = 200 mm y un entalle con Kt = 2,5 en su sección central, cuando se somete a la carga P = ±1 kN, una a
80 mm y otra a 160 mm del apoyo izquierdo. Las propiedades cíclicas de este material son: E = 205 GPa;
hc = 0,15; σc = 1,5Sut; c = –0,59; b = –0,09; εc = 0,45; Hc = σc / εchc
Regla de Neuber:
Regla de Coffin-Manson: