‘The structure shown is constructed of circular rod
which has a mass of 7 ky per meter of length. De-
termine the moment Mg about O caused by the
weight of the structure. Find the magnitude of My
Ans, Mo,
= 192.64 = 97.5) Nem
Mo = 194.6 Nem
Problem 2/115
2/116 The turnbuckle is tightened until the tension in
cable AB is 12 kN. Calculate the magnitude of
the moment about point O of the force acting on
2/117 ‘The right-angle pipe OAB of Prob. 2/99 is shown,
again here, Replace the 750-N tensile force which
the cable exerts on point B by a force-couple system
at point O. Ang R = 508 + 411) + 1895KN
Mo = ~361i ~ 718) + 419k Nem
Problem 2/117
In an attempt to pull down a nearly sawn-through
branch, the tree surgeon exerts a 400-N pull on the
line which is looped around the branch at A. Deter-
mine the moment about point C of the force exerted
on the branch and state the magnitude of this
‘moment2/127 ‘The specialty wrench shown in the figure is de-
signed for access to the hokl-down bolt on certain
automobile distributors, For the configuration
shown where the wrench lies in a vertical plane and
‘horizontal 200-N force is applied at A perpendie-
ular to the handle, calculate the moment Mg ap-
plied to the bolt at 0, For what value of the distance
d would the z-component of Mo be zero?
Ans. Mg = ~486) ~ 9.491 Nom, d = 74.5 mm
200 mm
Problem 2/127
2/128 In picking up a load from position B, a cable tension
FP of tramnitude 24 EN is develoved. Calculate the
2/129 Using the principles to be developed in Chapter 3 on
‘equilibrium, one can determine that the tension in
cable AB is 103.6 N. Determine the moment about
the.x-axis of this tension forceacting on point. Com-
pareyour result to the moment ofthe weight Wof the
15-kg uniform plate about the x-axis. What is the mo-
ment of the tension force acting at A about line OB?
Ans My = 31.1 Nem, (My = =31.1 Nem
Mon = 0
Problem 2/129,
2/130 ‘The special-purpose milling cutter is subjected to
the foree of 1200 N and a couple of 240 N-m as
shown, Determine the moment of this system aboutx Sg SST |
a Sood Problem 3/63
7 |
~¥ | 3/64 The uniform L-beam has a mass of 60 kg per meter
of its length. Determine the tension in the two sup-
pase porting cables and the reaction at D.
3/62 Three workers are carrying a 4-t by 6- panel in the
horizontal position shown. If the homogeneous panel
weight 100 Ib, estimate the lifting force exerted by
each worker.
Problem 3/64
3/65 The vertical mast supports the 4-kN force and is con-
strained by the two fixed cables BC and BD and by
a ball-and-socket connection at A. Calculate the ten-
sion 7 in BD. Can this be accomplished by using
only one equation of equilibrium?
Ans, T, = 490 kN