Documentos de Académico
Documentos de Profesional
Documentos de Cultura
SALESIANA FACULTAD DE
INGENIERÍAS ESCUELA DE
MECÁNICA LABORATORIO DE
MECÁNICA DE FLUIDOS
GUIA DE PRÁCTICA Nº 2
TEMA: VENTILADOR CENTRÍFUGO OBJETIVO
GENERAL
Realizar una práctica de un ventilador centrífugo, con el fin de ver, conocer y
visualizar las partes fundamentales del equipo y su respectivo funcionamiento.
OBJETIVOS ESPECIFICOS
Observar las partes y accesorios del ventilador centrífugo.
Conocer y comprender el funcionamiento del equipo.
Variar la velocidad y el sistema del equipo.
Analizar los resultados proyectados por el programa.
MARCO TEORICO
1
UNIVERSIDAD POLITÉCNICA
SALESIANA FACULTAD DE
INGENIERÍAS ESCUELA DE
MECÁNICA LABORATORIO DE
MECÁNICA DE FLUIDOS
2
UNIVERSIDAD POLITÉCNICA
SALESIANA FACULTAD DE
INGENIERÍAS ESCUELA DE
MECÁNICA LABORATORIO DE
MECÁNICA DE FLUIDOS
También está disponible un controlador de software que permite leer las salidas
en otros programas de software, tales como Labview.
NOMENCLATURA Y FORMULAS
Name Symbol Unit Definition
Pressure difference between fan inlet and
Fan differential dp Pa (N/m²) outlet, in Newtons per square metre = (p -
f 2
pressure P ).
1
Orifice differential dp Pa (N/m2) Pressure difference between atmospheric
o
pressure pressure and the pressure at the inlet
orifice, in Newtons per square metre.
Discharge coefficient Cd Cd = 0.596 for the FM40
Fan speed n Hz Rotational speed of the fan
Inlet temperature T °C Air temperature measured within the inlet
a
duct.
Barometric pressure P Pa The ambient pressure of the surroundings,
a
measured in Newtons per square metre.
Acceleration due to g m/s² Acceleration acting on any point within
gravity the working fluid due to the effect of
gravity.
Taken as 9.81 m/s²
Inlet cross-sectional A m² Cross-sectional area of the fan inlet
1
area where d1 = 100mm
Outlet cross-sectional A m² Cross-sectional area of the fan outlet
2
area where d2 = 75mm
Density of air ρ air kg/m³ Density of the air entering the inlet duct.
Assumed to be the same as the density
of air exiting the outlet duct, and also
equal to ambient atmospheric density.
Volume flow rate Q m³/s The total volume of air passing through the
v
fan per second.
Inlet duct air velocity v m/s Velocity of air passing through the inlet
1
duct.
v=Q/A 1
1 v
Outlet duct air v m/s Velocity of air passing through the outlet
2
velocity duct.
V=Q/A
2 v 2
Pa Total pressure increase resulting from the
Fan total p F pressure work done by the fan on the air passing
t
through it.
3
UNIVERSIDAD POLITÉCNICA SALESIANA
FACULTAD DE INGENIERÍAS
ESCUELA DE MECÁNICA
LABORATORIO DE MECÁNICA DE FLUIDOS
Fan power output P W The fan power output is the work done by
u
the fan, which may also be considered as
the energy gained by the air passing
through the fan.
INVESTIGACIÓN COMPLEMENTARIA.
1. Elaborar una hoja de datos (EXCEL) con los valores proyectados por el
programa.
2. Determinar las siguientes curvas:
Las graficas deben realizarse de todas las corridas que se le den al programa
Fan discharge Qv vs. Total pressure ptF
Fan discharge Qv vs. Fan differential pressure
Fan discharge Qv vs. Power output
Fan discharge Qv vs. Fan efficiency Egr
Fan discharge Qv vs. Predict Total pressure
Fan discharge Qv vs. Predict Power output
4
UNIVERSIDAD POLITÉCNICA
SALESIANA FACULTAD DE
INGENIERÍAS ESCUELA DE
MECÁNICA LABORATORIO DE
MECÁNICA DE FLUIDOS
1. Caratula
2. Resumen
Es la segunda página del reporte. En forma concisa se informará sobre el
objetivo de la práctica, el equipo y las consideraciones principales del modelo,
se enfatizarán los resultados obtenidos, así cómo las limitaciones a su
validez.
3. Índice.
4. Objetivo general y específico.
6. Fundamentos teóricos
7. Diseño de la práctica
7.1 Hoja de datos con la información completa
7.2 Equipo y materiales
6.5 Procedimiento de la práctica
8. Análisis de datos y resultados.
8.1 Cálculos, análisis estadístico, resultados, gráficos.
8.2 Conclusiones y recomendaciones.
9. Bibliografía.
10. Anexos