Documentos de Académico
Documentos de Profesional
Documentos de Cultura
• ¿Qué es anisotropía?
Describimos las propiedades elásticas (la relación entre los esfuerzos y la deformación)
de un material con el tensor: cijkl
σij = cijkl εkl “Ecuación constitutiva”
¿Cuántos valores independientes tiene este tensor?
i*j*k*l=3*3*3*3=81 (!)
pero por las simetrías de los tensores de deformación y esfuerzos:
εkl = εkl cijkl = cijlk 81 - 9*3 = 54
= βH y η = 1
Dos parámetros:
Wikipedia
EFECTO DE ANISOTROPÍA EN LOS DATOS -
ANISOTROPÍA AZIMUTAL
Figure 10. (a) Anisotropic velocity variations (vSH-vSV)/vS in S362WMANI and SAW642AN. Average
anisotropy at each depth has been removed in both models to eliminate the effects of different reference
Kustowski & Ekstrom, 2008
models. (b) Correlation between S362WMANI and SAW642AN calculated up to spherical-harmonic
Long & Becker 2010 degree 2 (solid line) and 8 (dashed line). (c) Correlation between isotropic and anisotropic variations in
S362WMANI (solid line) and SAW642AN (dashed line) calculated up to spherical-harmonic degree 8.
The dotted lines in Figures 10b and 10c indicate the 650-km discontinuity and the shaded areas indicate
correlations lower than "0.3 and higher than 0.3.
performed CMT analyses for 229 earthquakes of Mw ! 6.5, are, in general, very similar to the SH8/U4L8 soluti
discussed in section 2, using models S362ANI and SH8/ The epicenters are typically shifted by about 10
U4L8 [Dziewoński and Woodward, 1992]. The latter model, (Figure 13). Earthquakes in the Indian Ocean and wes
ANISOTROPÍA OBSERVADA -
DIVISIÓN DE ONDA DE CORTE
•
Es
una
fase
aislada
más
allá
de
una
distancia
de
85°
.
2004-‐2007
• ¿Qué es anisotropía?