Documentos de Académico
Documentos de Profesional
Documentos de Cultura
ESTE
Coordenadas UTM: Las línea referencial vertical corresponde al Meridiano de Greenwich.
Y la línea referencial horizontal corresponde al Ecuador.
Coordenadas UTM: Son como planos de coordenadas simples.
5
( 3, 4) ( 7, 4)
4
2
( 3, 2) ( 7, 2)
1 2 3 4 5 6 7 8 9 10
Coordenadas UTM: Son como planos de coordenadas simples.
El polígono podría
5 ser un terreno por
( 3, 4) ( 7, 4) ejemplo. Y mediría
4 4 x 2 = 8 m2.
2
( 3, 2) ( 7, 2)
1 2 3 4 5 6 7 8 9 10
COTAS:
Las cotas son las medidas o dimensiones
que corresponden a una línea , altura o
elemento arquitectónico y/o estructural.
PLANOS DE HABILITACIÓN URBANA:
Son los planos que corresponden a una zona urbana o urbanización, en ellos se aprecian de
forma general:
- Los límites de las manzanas y terrenos (Planos de trazo y lotización),(secciones de
vía).
- Los planos de red de agua potable.
- Los planos de red de desagüe.
- Los planos de conexiones domiciliarias de agua potable.
- Planos topográficos o Planos topográficos acompañando alguno de los panos
anteriores.
PARTES GENERALES DE LOS PLANOS
DE HABILITACIÓN URBANA: Planta General
Plano de Ubicación
Cuadro de Datos
Rótulo General
PARTES GENERALES DE LOS PLANOS DE HABILITACIÓN URBANA:
PLANTA GENERAL
PARTES GENERALES DE LOS PLANOS DE HABILITACIÓN URBANA:
PLANO DE UBICACIÓN
PARTES GENERALES DE LOS PLANOS DE HABILITACIÓN URBANA:
CUADRO DE DATOS
PARTES GENERALES DE LOS PLANOS DE HABILITACIÓN URBANA:
RÓTULO
PLANO COMPLETO DE TRAZADO Y LOTIZACIÓN
PLANO COMPLETO DE RED DE AGUA POTABLE
PLANO COMPLETO DE RED DE AGUA POTABLE
PLANO COMPLETO DE CONEXIONES DE AGUA
PLANO COMPLETO DE CONEXIONES DE AGUA