Documentos de Académico
Documentos de Profesional
Documentos de Cultura
Development of A Continuous Directional Coring System For Deep
Development of A Continuous Directional Coring System For Deep
DEEP-SEA DRILLING
Y como conclusion eL DLS mejoro los rangos de 5,7 - 15 del bend angle y el ROP
incremento de 1 a 15 mph, y ademas se integro los sistemas, todo lo que es la
herramienta de perforacion convencional con la herramienta de perforacion
direccional TURBO CORER.
The utilized tool was the I TURBO CORER for perforation directional in deep
waters, this it was developed under a system that is BHA assembly (tiraspolky
1985), the one which had developed this tool of I TURBO CORER, to generate a
motor of turbine assembling in which he/she helped to perforate but quick the
formations and to generate bigger ROP.
Then a BHA analysis was made and you verifies q he/she has a diameter of 8 1/2"
and the mechanical scissor of 6 1/2, the heavyweight drill pipe (HWDP) it was from
5" and 14 meetings and the applied angles to the tool I TURBO CORER they no
longer went from 0 to 2 but furon from 7,5 to 30 meters for each 1,5 feet, then the
window you wide inside the witness of BHA.
PROTOTYPE OF THE DIRECCIONAL CORING SYSTEM
Him but important it is the CORER CATCHER, he/she is the kidnapper of witness,
when entering it recovers the witness.
The CORER CATCHER has four parts:
- The internal diameter of the CORER
- The half diameter
- The box planar
- The contact point
And I eat conclusion the DLS I improve the ranges of 5,7 - 15 of the bend angle
and the ROP increment of 1 to 15 mph, and you also integrates the systems, all
that is the tool of conventional perforation with the tool of directional perforation
TURBO CORER.