Documentos de Académico
Documentos de Profesional
Documentos de Cultura
EVAPORATORS
FR
FR
GR
TT
PI
GNH
PI
FBV
TNH
MR
FC
SN
MV
EG
CONDENSADORES CB
CONDENSERS
VC
VCE
CBE
AL
ALE
NCF
KC
VRE
CPN
VL
VLE
INDICE - INDEX
FR ...............................
GR ..............................
EC ...............................
PI com. ....................
PI ind. ......................
TT................................
MR..............................
MV .............................
FBV ............................
FC ...............................
SN ..............................
EG ..............................
GNH .........................
TNH ...........................
NH3
Cbicos - Cubic
CO2
CONDENSADORES - CONDENSERS
CB ...............................
VC...............................
CPN ...........................
NCF............................
KC ...............................
CBE ............................
VCE ............................
VRE ............................
AL ...............................
VL ...............................
ALE ............................
VLE.............................
15
25
29
33
39
47
53
57
63
EVAPORADORES
Cbicos - Cubic
65
67
71
77
81
87
93
99
107
113
115
117
CONDENSADORES
R-404A
125
131
137
147
151
157
163
169
ENFRIADORES DE LQUIDO
173
177
187
195
199
EVAPORADORES - EVAPORATORS
EVAPORATORS
CARACTERSTICAS GENERALES
GENERAL CHARACTERISTICS
CMARA
+10C
0/+2C
-18/-25C
-40C
SEPARACIN
DE ALETAS
De 2,8 a 4,2mm
De 3,3 a 6mm
De 6 a 9mm
De 9 a 12mm
APLICACIN
Gnero fresco delicado, salas de trabajo
Conservacin gnero fresco
Conservacin productos congelados
Tneles de congelacin rpida
ROOM
+10C
0/+2C
-18/-25C
-40C
FIN
SPACING
From 2,8 to 4,2mm
From 3,3 to 6mm
From 6 to 9mm
From 9 to 12mm
APPLICATION
Delicate fresh goods, workrooms
Preservation of fresh goods
Preservation of frozen products
Quick-freezing tunnels
The heat exchanging coils are manufactured with copper tube and
high-efficiency corrugated aluminum fins, which provide in all
cases very high cooling performances.
Casings are built of aluminum in some cases and galvanized steel
sheet in others, coated with RAL-9002 white polyester resin, well
finished, with high structural rigidity and great corrosion resistance.
All the evaporators comply with applicable Machine Directive
2006/42/CE, Low Voltage Directive 2006/95/CE and Pressure
Equipment Directive 97/23/CE.
OPCIONES
OPTIONS
DESESCARCHES
Elctrico
Mediante resistencias blindadas de acero inoxidable repartidas por
el interior de la batera y por debajo de la bandeja interior de
goteo. Con conexiones estancas vulcanizadas y conectadas a una
caja de conexiones con proteccin IP-55.
La gama GR se ofrece con dos posibilidades de desescarche con
diferente nmero de resistencias y potencia calorfica: desescarche
normal E1 y desescarche reducido E0.
Tambin se ofrecen resistencias circulares para su colocacin alrededor de los ventiladores.
DEFROSTING
Electric
It is carried out by heaters encased in stainless steel with waterproof
vulcanized connections, distributed inside the coil and under the
inner drip tray and connected to a leak-tight junction box with IP-55
protection.
The GR range comes with two defrosting possibilities depending on
the number of heaters and heating power as follows: normal
defrosting E1 and reduced defrosting E0.
As an option circular heaters can also be installed to avoid frosting
around the fan motors.
EVAPORADORES
EVAPORADORES
EVAPORADORES
EVAPORATORS
Gases calientes
Los modelos adaptados para este tipo de desescarche incorporan:
Una toma en forma de T antes del distribuidor de lquido
para la entrada de los gases calientes a la batera
Un serpentn por debajo de la bandeja interior de desage
para su desescarche
Hot gas GC
The units adapted to this kind of defrosting include:
A T-shaped inlet connection in the liquid distributor to introduce the hot gas through the coil
A tube coil under the inner drip tray for its defrosting
Inversin de ciclo
Los modelos adaptados para este tipo de desescarche incorporan:
Batera con distribuidor de lquido y dos colectores, para permitir el funcionamiento reversible de la unidad como evaporador (fase produccin fro) o condensador (ciclo invertido
para desescarche).
Un serpentn por debajo de la bandeja interior de desage
para su desescarche.
Nota: En los desescarches por gases calientes y por inversin de
ciclo se pueden realizar adaptaciones particulares a las necesidades de cada cliente (consultar nuestro Departamento Tcnico)
Cycle Inversion
The units adapted to this kind of defrosting include:
Finned coil with liquid distributor and two headers to allow the
reversible operation of the unit either as an evaporator (cooling production cycle) or as a condenser (inverted cycle for
defrosting).
A tube coil under the inner drip tray for its defrosting
VENTILADORES
Todos los ventiladores trifsicos de las gamas FR (industrial), GR,
GNH, TT, TNH, PI, MR son de dos velocidades segn conexin /Y.
De fbrica salen conectados a alta velocidad (). En la caja de
conexiones de cada ventilador se puede hacer fcilmente el cambio
a baja velocidad (Y). Esta posibilidad permite reducir el caudal de
aire (por ejemplo en casos en los que se produzcan proyecciones de
gotas de agua condensadas en la batera al exterior) y el nivel sonoro cuando las condiciones lo requieran. Para obtener los caudales
de aire y las capacidades de los evaporadores a baja velocidad,
multiplicar los datos que se dan en los catlogos (conexin ) por
0,77 para el caudal de aire y por 0,87 para las capacidades.
Para cada gama se ofrecen ventiladores de diferentes caractersticas de los estndar como pueden ser de 60Hz, monofsicos o
trifsicos, de tipo tubular, con mayor o menor velocidad etc.
Tambin hay posibilidad en algunas de las gamas de solicitar
embocaduras para mejorar la proyeccin del aire o para acoplar conductos textiles.
FAN MOTORS
All three-phase fan motors of the series FR (industrial), GR, GNH,
TT, TNH, PI, MR are two-speed models according to connection
/Y. From factory they come connected at high speed (). The
change to low speed (Y) can easily be made on the junction box
placed on each fan motor. This possibility allows reducing the volume of airflow (for example in cases where condensed water from
the coil is expelled to the outside) as well as the sound level when
conditions require it. To obtain the volume of the airflow, multiply
the data given in the catalogues (connection ) by 0.77 and to
obtain the capacity of the evaporators at low speed, multiply it by
0.87.
For every range fan motors are offered with different characteristics from the standard such as for 60Hz, single or three
phase, tubular type, with diferent turning speed etc.
It is possible to ask for special ducts in some ranges to improve
the air discharge or to connect textile conducts.
TRATAMIENTOS ANTICORROSIN
Para los tubos:
Tubos de cobre zincados o estaados
Tubos de acero inoxidable
Para las aletas:
Aletas de aluminio prelacadas
Aletas de cobre o de acero inoxidable.
Para la batera:
Batera tratada con resina poliuretano
Batera con tratamiento especial BLYGOLD
OTRAS OPCIONES
Circuitos para agua, agua glicolada u otras sales o refrigerantes lquidos.
Tubos de acero inoxidable para refrigerante amoniaco, tanto
en sistema de bombeo como de expansin directa. Hay
gamas de evaporadores especficas para amoniaco como
son los GNH y TNH, pero cualquier modelo de evaporador
se puede adaptar a su funcionamiento con amoniaco fabricando su batera con tubo de acero inoxidable (consultar
Departamento Tcnico de FRIMETAL para casos concretos)
Bandeja de desage con aislamiento anticondensacin.
Se puede fabricar cada evaporador con caractersticas constructivas, dimensionales o de capacidad diferentes de las de
los modelos estndar y adaptadas a las necesidades particulares de nuestros clientes.
Carrocera completa en acero inoxidable, incluyendo soporte
y tornillera.
Adaptacin para trabajar con refrigerante CO2.
10
ANTICORROSION TREATMENT
For the tubes:
Zinc or tin copper tubes
Stainless steel tubes
For the fins:
Pretreated aluminum fins
Copper or stainless steel fins
For the coil:
Coil treated with polyurethane resin
Coil with special treatment type BLYGOLD
OTHER OPTIONS
Circuits for water, glycol water or other brines or refrigerants.
Stainless steel tubes for refrigerant ammonia, both for pumped systems and for direct expansion. There are two ranges of
evaporators specifically designed for ammonia (series GNH
and TNH) nevertheless, any evaporator model can be adapted for the use of ammonia if its coil is made with a stainless
steel tube (consult the Technical Department of FRIMETAL for
specific cases).
Anti condensation insulation for the drip tray.
We may also supply any evaporator with constructive characteristics, dimensions or capacities different from those shown
in the catalogues, specially adapted to the requirements of our
customers.
Complete casing in stainles steel, including supporting brackets, bolts and screws.
Adaptation to refrigerant CO2.
EVAPORATORS
Nomenclatura utilizada
Tc Temperatura del aire en la cmara a la entrada del evaporador C
Word list
Tc Room air temperature at the evaporator inlet C
Te
Evaporation temperature C
Te
Temperatura de evaporacin C
t1
t1
HR
HR
Capacidad de Aplicacin
Es la capacidad del evaporador para distintas temperaturas de
cmara correspondientes a las aplicaciones ms habituales de
cada serie.
Para condiciones diferentes de las de aplicacin, utilizar el mtodo
general explicado a continuacin.
Application Capacity
It is the capacity provided by the evaporator for different room temperatures correspondent with the most usual applications of each
series.
For different working conditions, use the general calculation
method stated below.
SELECCIN DE UN EVAPORADOR
SELECTION OF AN EVAPORATOR
El salto trmico t1
El salto trmico t1=Tc-Te es la diferencia entre la temperatura del
aire en la cmara a la entrada del evaporador Tc y la temperatura
de evaporacin Te y hay que determinarlo previamente a la seleccin del evaporador. Cuanto menor sea el salto trmico seleccionado, el evaporador obtenido ser de mayor tamao.
El salto trmico depende de varios factores como la temperatura
de la cmara, el tipo de gnero a enfriar, la humedad relativa, etc.
En general, cuanto menor sea la temperatura de la cmara, menor
deber ser el salto trmico seleccionado. Por otra parte, a mayor
salto trmico le corresponde menor humedad relativa HR en la
cmara y la relacin entre ambos parmetros evoluciona aproximadamente segn el diagrama GR1.
Temperature difference t1
The temperature difference t1=Tc-Te is the difference between the
air temperature at the evaporator inlet Tc and the evaporation temperature Te and it has to be determined previously to the selection
of the unit. The smaller the temperature difference, the larger the
selected evaporator will be.
The temperature difference depends on various factors such as
room temperature, type of product to be cooled, relative humidity,
etc. In general, the lower the room temperature, the lower the temperature difference should be. On the other hand, the higher the
temperature difference, the lower the relative humidity HR in the
room. The relationship between both factors develops approximately according to the diagram GR1 shown below.
Los factores Fc y Fr
Una vez fijado el salto trmico t1, y sabiendo la temperatura de
la cmara Tc, se obtiene la temperatura de evaporacin Te, segn
la relacin explicada anteriormente.
Con estos datos, entrando en el diagrama GR2 se tiene el factor
de correccin Fc.
Conociendo el refrigerante a utilizar, se obtiene el factor Fr segn
el cuadro siguiente.
Factors Fc and Fr
Once the temperature difference t1 is determined and the room
temperature Tc is known, the evaporation temperature Te can be
calculated following the expression given above.
With these data and according to diagram GR2 the correction factor Fc is calculated.
Once the refrigerant to be used is known, the correction factor Fr
is obtained according to the following table.
Qev
Fc x Fr
Qev
Fc x Fr
11
EVAPORADORES
EVAPORADORES
EVAPORADORES
EVAPORATORS
GR-1
GR-2
EJEMPLO DE SELECCION FR
- SELECTION EXAMPLE FR
GR-1
Qev = 11.500 W
Tc = -11C
HR = 80%
R-404A
t1 = 7 K
12
GR-2
Tc = -11C
t1 = 7 K
Te = -18 K
Fc = 0,8
FRM - 840
FRB - 580
EVAPORADORES
EVAPORATORS
SOUND LEVEL
Para algunos evaporadores se indica la presin sonora dB(A) en condiciones de campo abierto y plano perfectamente reflectante, sobre paredes paraleleppedas a una distancia de 10 m, conforme a la norma EN
13487. Este dato es slo utilizable para efectos comparativos.
En la prctica, para condiciones acsticas medias se aconseja
aumentar en 4 dB(A) los datos indicados en catlogo.
Para otras distancias, el nivel sonoro se calcula aplicando a los
datos del catlogo la correccin del grfico GR3.
Si hay varias unidades evaporadoras, con el grfico GR4 se calcula
el incremento del nivel sonoro total en funcin de su nmero.
GR-3
EVAPORADORES
NIVEL SONORO
GR-3
GR-4
EJEMPLO - EXAMPLE
dB(A)?
2 x PIB-1350
a 20 m.
CATALOGO
PIB-1350
=> 40 dB(A)
dB(A)
40 - 6 + 3 = 37
20 m => -6dB(A)
GR-3
PROYECCIN DE AIRE
AIR THROW
Some catalogues specify the air throw. This is the approximate distance that the air gets to after it is expelled from the fan motors until
it reaches a residual speed of 0.25 m/s, which is enough for renewing the airflow in that area.
For this to happen in practice, it is necessary that the conditions of
the room, in regard to the situation of the goods, aisles layout, ceiling design, etc., meet the necessary requirements to allow an adequate airflow.
The electrical consumption and power input data of the fan motors
shown on the catalogue refer to an ambient temperature of
+20C. It is necessary to have in mind that at low temperatures
both the consumption and power input increase about a 16% for
air temperatures of -20C and a 25% for temperatures of -40C.
This must be taken into account by the installer at the moment of
calculating the elements of the electric panel of he cold installation.
13
EVAPORADORES
CAPACIDADES NOMINALES
ENTRE 1,7 Y 79,4 kW
NOMINAL CAPACITIES
BETWEEN 1,7 AND 79,4 kW
APLICACIONES
APPLICATIONS
Serie FRM
Conservacin de gneros frescos a 0/+2 C o de congelados hasta -18 C.
Serie FRB
Conservacin de congelados a baja temperatura hasta -30 C.
Serie FRL
Cmaras de muy baja temperatura y tneles de congelacin hasta -40 C.
Series FRM
Preservation of fresh goods at 0/+2 C and frozen produts at -18 C.
Series FRB
Preservation of frozen product at low temperature down to -30 C.
Series FRL
Low temperature rooms and tunnels down to -40 C.
Batera de elevada eficiencia frigorfica con tubo de cobre estriado interiormente y aletas de aluminio corrugadas, entregada con circuito cerrado y presin remanente de aire seco y vlvula de obs. Mdulos independientes para cada ventilador.
Carcasa exterior en chapa de aluminio y galvanizada lacada en resina
poliester blanco RAL-9002.
Ventiladores axiales de rotor externo y con proteccin trmica.
Gama comercial: 300 y 400, 1~230V 50/60Hz, IP-44.
Gama industrial: 500, 2 velocidades, 3~400V 50/60Hz, IP-54.
630, 2 velocidades, 3~400V 50Hz, IP-54.
High cooling efficiency coil built of internally grooved tube and corrugated
aluminium fins, delivered with sealed circuit with pressured air inside with
valve for manometer connection. Finned coil sections separated and independent for each fan.
Casing made of aluminium and galvanised sheet coated in a corrosion
resistant white polyester RAL-9002.
External rotor axial fans motors with termal protection.
Comercial range: 300 and 400, 1~230V 50/60Hz, IP-44.
Industrial range: 500, 2 speed, 3~400V 50/60Hz, IP-54.
630, 2 speed, 3~400V 50Hz, IP-54.
OPCIONES
OPTIONS
FR M -850 -E
E: Elctrico - Electric
Desescarche - Defrosting E+: Elctrico de alta eficiencia - Electric of high efficiency
A: Por agua - By water
N Modelo - Model Nr.
GC: Gas caliente - Hot gas
IC: Inversin de ciclo - Cycle inversion
Sep. aletas - Fin spacing M: 4,2 mm.
B: 7 mm.
L: 9 mm.
Serie modelo - Model serie
15
GAMA COMERCIAL
- COMMERCIAL RANGE
MODELO
MODEL
R-404A
300
4,2 mm
400
FRM
148
FRM
165
FRM
235
FRM
270
FRM
310
FRM
445
FRM
500
FRM
575
FRM
590
FRM
840
FRM
960
FRM
1145
Capacidad nominal
Nominal capacity
Tc=0C t1=8K
2470
2980
3700
4940
5960
7400
9120
11320
12200
15620
18300
23430
Capacidad aplicacin
Application capacity
Tc=+10C t1=10K W
Tc=-18C t1=7K W
3710
1900
4470
2290
5550
2850
7410
3800
8940
4590
11100
5700
13680
7020
16980
8720
18300
9390
23430
12030
27450
14090
35150
18040
Superficie / Surface
m2
11,0
14,6
21,9
21,9
29,2
43,8
45,2
67,8
52,1
78,1
78,1
117
dm3
m3/h
2,4
3,2
4,8
4,4
5,9
8,8
8,8
13
10
15
15
23
1500
1450
1350
3000
2900
2700
4370
4100
6700
6200
10050
9300
MODELO
MODEL
300
7 mm
400
FRB
94
FRB
110
FRB
154
FRB
175
FRB
225
FRB
297
FRB
350
FRB
435
FRB
445
FRB
510
FRB
580
FRB
820
Capacidad nominal
Nominal capacity
Tc=0C t1=8K
2000
2490
3200
4000
4980
6400
7620
9790
10060
13340
15090
20010
Capacidad aplicacin
Application capacity
Tc=-18C t1=7K
Tc=-25C t1=6K
W
W
1540
1260
1920
1570
2460
2020
3080
2520
3830
3140
4930
4030
5870
4800
7540
6170
7750
6340
10270
8400
11620
9510
15410
12610
Superficie / Surface
m2
6,9
9,2
13,7
13,7
18,3
27,5
28,3
42,5
32,7
49,0
49,0
73,5
dm3
m3/h
2,4
3,2
4,8
4,4
5,9
8,8
8,8
13
10
15
15
23
1550
1500
1430
3100
3000
2860
4550
4330
7100
6640
10650
9960
MODELO
MODEL
300
9 mm
400
FRL
85
FRL
100
FRL
135
FRL
160
FRL
195
FRL
275
FRL
330
FRL
420
FRL
425
FRL
500
FRL
550
FRL
710
Capacidad nominal
Nominal capacity
Tc=0C t1=8K
1740
2200
2900
3480
4400
5800
6730
8870
8980
12180
13470
18270
Capacidad aplicacin
Application capacity
Tc=-18C t1=7K
Tc=-25C t1=6K
Tc=-40C t1=5K
W
W
W
1340
1100
890
1690
1390
1120
2230
1830
1480
2680
2190
1770
3390
2770
2240
4470
3650
2960
5180
4240
3430
6830
5590
4530
6910
5660
4580
9380
7670
6210
10370
8490
6870
14070
11510
9320
Superficie / Surface
m2
5,5
7,4
11,0
11,0
14,7
22,1
22,7
34,1
26,2
39,3
39,3
58,9
dm3
m3/h
2,4
3,2
4,8
4,4
5,9
8,8
8,8
13
10
15
15
23
1570
1530
1460
3140
3060
2920
4620
4430
7240
6840
10860
10260
COMMON DATA
1x300
0,38
80
1x300
0,38
80
2x300
0,76
160
2x300
0,76
160
2x300
0,76
160
3x300
1,14
240
3X300
1,14
240
2x400
1,46
320
2x400
1,46
320
3x400
2,19
480
3X400
2,19
480
12
12
11
14
14
13
14
14
14
14
15
15
num.
W
2+1
1650
2+1
1650
3+1
2200
2+1
3300
2+1
3300
3+1
4400
2+1
5100
3+1
6800
3+1
5000
4+1
6400
3+1
7500
4+1
9600
L/h
GAS
600
1x3/4
800
1x3/4
1200
1x3/4
1200
2x3/4
1600
2x3/4
2400
2x3/4
2500
3x3/4
3750
3x3/4
2100
2x3/4
3100
2x3/4
3100
3x3/4
4700
3x3/4
1/2
16
24
1/2
16
28
1/2
16
38
1/2
16
41
1/2
22
48
1/2
22
58
1/2
22
69
5/8
22
71
5/8
28
84
5/8
28
102
22
35
120
Caudal / Flow
Entrada / Inlet
Dp=20 KPa
Entrada / Inlet
Salida / Oulet
Peso neto / Net weight FRM, FRB E, FRL E
mm
Kg
1/2
1/2
23
Tc: Temperatura de cmara - Room temperature t1: Salto trmico - Temperature difference
16
- INDUSTRIAL RANGE
MODELO
MODEL
R-404A
500
4,2 mm
630
FRM
850
FRM
950
FRM
1290
FRM
1780
FRM
2430
FRM
2750
FRM
2590
FRM
3500
FRM
4490
FRM
4800
Capacidad nominal
Nominal capacity
Tc=0C t1=8K
14670
17000
25800
29800
38700
44700
45800
52900
68700
79350
Capacidad de aplicacin
Application capacity
Tc=+10C t1=10K
Tc=-18C t1=7K
W
W
22010
11300
25500
13090
38700
19870
44700
22950
58050
29800
67050
34420
68700
35270
79350
40730
103050
52900
119030
61100
Superficie / Surface
m2
64
85
108
145
163
217
175
234
263
351
dm3
m3/h
MODELO
MODEL
13
17
21
28
31
42
34
45
50
67
6750
6260
12340
11260
18510
16890
24100
21560
36150
32340
7 mm
500
630
FRB
560
FRB
650
FRB
1050
FRB
1450
FRB
1730
FRB
2250
FRB
2160
FRB
2650
FRB
3450
FRB
3900
Capacidad nominal
Nominal capacity
Tc=0C t1=8K
12530
15000
22080
26360
33120
39540
39300
47200
58950
70800
Capacidad aplicacin
Application capacity
Tc=-18C t1=7K
Tc=-25C t1=6K
W
W
9650
7890
11550
9450
17000
13910
20300
16610
25500
20870
30450
24910
30260
24760
36340
29740
45390
37140
54520
44600
Superficie / Surface
m2
40
53
68
91
102
136
110
147
165
220
dm3
13
17
21
28
31
42
34
45
50
67
m3/h
7280
6830
13500
12520
20250
18780
26400
24400
39600
36600
9 mm
MODELO
MODEL
500
630
FRL
540
FRL
600
FRL
865
FRL
1160
FRL
1590
FRL
1950
FRL
1795
FRL
2340
FRL
2960
FRL
3850
Capacidad nominal
Nominal capacity
Tc=0C t1=8K
11370
13820
20140
24460
30210
36690
35700
43500
53550
65250
Capacidad aplicacin
Application capacity
Tc=-18C t1=7K
Tc=-25C t1=6K
Tc=-40C t1=5K
W
W
W
8750
7160
5800
10640
8710
7050
15510
12690
10270
18830
15410
12470
23260
19030
15410
28250
23110
18710
27490
22490
18210
33500
27410
22190
41230
33740
27310
50240
41110
33280
Superficie / Surface
m2
32
43
55
73
82
109
88
118
132
176
dm3
m3/h
13
17
21
28
31
42
34
45
50
67
7500
7100
14000
13100
21000
19650
27500
25600
41250
38400
COMMON DATA
Ventiladores / Fans
3~400V 50Hz 1350 r.p.m
Consumo / Consumption
Potencia absorbida / Power input
Proyeccin aire / Air throw
nx
A
kW
m
1x500
1,41
0,72
1x500
1,41
0,72
2x500
2,82
1,44
2x500
2,82
1,44
3x500
4,23
2,16
3X500
4,23
2,16
2x630
6,4
3,8
2x630
6,4
3,8
3x630
9,6
5,7
3x630
9,6
5,7
17
16
19
18
21
20
32
31
33
32
num.
W
4+2
5200
6+2
7200
4+2
8800
6+2
12200
4+2
13200
6+2
18300
6+2
14400
8+2
18400
6+2
21300
8+2
27300
L/h
GAS
2200
1x3/4
3000
1x3/4
3800
2x3/4
5000
2x3/4
5700
3x3/4
7600
3x3/4
4500
2x3/4
6000
2x3/4
6750
3x3/4
9000
3x3/4
16-35
16-35
22-42
22-54
22-54
22-54
28-66
28-66
28-66
28-66
89
99
142
159
201
227
224
251
322
363
Caudal / Flow
Entrada / Inlet
Dp=20 KPa
Entrada-Salida / Inlet-Oulet
mm
Kg
Tc: Temperatura de cmara - Room temperature t1: Salto trmico - Temperature difference
17
EVAPORADORES
GAMA INDUSTRIAL
MODELO
MODEL
300
4,2 mm
R-404A
400
FRM
148
FRM
165
FRM
235
FRM
270
FRM
310
FRM
445
FRM
500
FRM
575
FRM
590
FRM
840
FRM
960
FRM
1145
Capacidad nominal
Nominal capacity
Tc=0C t1=8K
2100
2570
3250
4200
5140
6500
7864
9945
10280
13380
15420
20070
Capacidad aplicacin
Application capacity
Tc=+10C t1=10K W
Tc=-18C t1=7K W
3150
1620
3860
1980
4880
2500
6300
3230
7710
3960
9750
5010
11800
6060
14920
7660
15420
7920
20070
10300
23130
11870
30110
15450
Superficie / Surface
m2
11,0
14,6
21,9
21,9
29,2
43,8
45,2
67,8
52,1
78,1
78,1
117
dm3
2,4
3,2
4,8
4,4
5,9
8,8
8,8
13
10
15
15
23
m3/h
1500
1450
1350
3000
2900
2700
4370
4100
6700
6200
10050
9300
MODELO
MODEL
300
7 mm
400
FRB
94
FRB
110
FRB
154
FRB
175
FRB
225
FRB
297
FRB
350
FRB
435
FRB
445
FRB
510
FRB
580
FRB
820
Capacidad nominal
Nominal capacity
Tc=0C t1=8K
1710
2110
2770
3420
4220
5540
6457
8476
8620
11460
12930
17190
Capacidad aplicacin
Application capacity
Tc=-18C t1=7K
Tc=-25C t1=6K
W
W
1320
1080
1620
1330
2130
1750
2630
2150
3250
2660
4270
3490
4970
4070
6530
5340
6640
5430
8820
7220
9960
8150
13240
10830
Superficie / Surface
m2
6,9
9,2
13,7
13,7
18,3
27,5
28,3
42,5
32,7
49,0
49,0
73,5
dm3
2,4
3,2
4,8
4,4
5,9
8,8
8,8
13
10
15
15
23
m3/h
1550
1500
1430
3100
3000
2860
4550
4330
7100
6640
10650
9960
MODELO
MODEL
300
9 mm
400
FRL
85
FRL
100
FRL
135
FRL
160
FRL
195
FRL
275
FRL
330
FRL
420
FRL
425
FRL
500
FRL
550
FRL
710
Capacidad nominal
Nominal capacity
Tc=0C t1=8K
1520
1890
2480
3040
3780
4960
5783
7589
7760
10440
11640
15660
Capacidad aplicacin
Application capacity
Tc=-18C t1=7K
Tc=-25C t1=6K
Tc=-40C t1=5K
W
W
W
1170
960
780
1460
1190
960
1910
1560
1260
2340
1920
1550
2910
2380
1930
3820
3120
2530
4450
3640
2950
5840
4780
3870
5980
4890
3960
8040
6580
5320
8960
7330
5940
12060
9870
7990
Superficie / Surface
m2
5,5
7,4
11,0
11,0
14,7
22,1
22,7
34,1
26,2
39,3
39,3
58,9
dm3
m3/h
2,4
3,2
4,8
4,4
5,9
8,8
8,8
13
10
15
15
23
1570
1530
1460
3140
3060
2920
4620
4430
7240
6840
10860
10260
COMMON DATA
1x300
0,38
80
1x300
0,38
80
2x300
0,76
160
2x300
0,76
160
2x300
0,76
160
3x300
1,14
240
3X300
1,14
240
2x400
1,46
320
2x400
1,46
320
3x400
2,19
480
3X400
2,19
480
12
12
11
14
14
13
14
14
14
14
15
15
num.
W
2+1
1650
2+1
1650
3+1
2200
2+1
3300
2+1
3300
3+1
4400
2+1
5100
3+1
6800
3+1
5000
4+1
6400
3+1
7500
4+1
9600
L/h
GAS
600
1x3/4
800
1x3/4
1200
1x3/4
1200
2x3/4
1600
2x3/4
2400
2x3/4
2500
3x3/4
3750
3x3/4
2100
2x3/4
3100
2x3/4
3100
3x3/4
4700
3x3/4
12,7
12,7
26
12,7
21,3
30
12,7
21,3
39
12,7
21,3
43
12,7
21,3
51
12,7
21,3
61
12,7
21,3
74
15,9
26,9
74
15,9
26,9
88
15,9
33,7
105
15,9
33,7
126
Caudal / Flow
Entrada / Inlet
Dp=20 KPa
Entrada / Inlet
Salida / Oulet
Peso neto / Net weight FRM, FRB E, FRL E
mm
mm
Kg
12,7
12,7
24
Tc: Temperatura de cmara - Room temperature t1: Salto trmico - Temperature difference
18
MODELO
MODEL
R-404A
500
4,2 mm
FRM
850
FRM
950
FRM
1290
FRM
1780
FRM
2430
FRM
2750
Capacidad nominal
Nominal capacity
Tc=0C t1=8K
12200
14150
22160
26000
33240
39000
Capacidad de aplicacin
Application capacity
Tc=+10C t1=10K
Tc=-18C t1=7K
W
W
18300
9390
21230
10900
33240
17060
39000
20020
49860
25590
58500
30030
Superficie / Surface
m2
64
85
108
145
163
217
dm3
12,3
16,4
20,1
26,8
29,6
39,4
m3/h
6750
6260
12340
11260
18510
16890
MODELO
MODEL
500
7 mm
FRB
560
FRB
650
FRB
1050
FRB
1450
FRB
1730
FRB
2250
Capacidad nominal
Nominal capacity
Tc=0C t1=8K
10660
12400
19280
22760
28920
34140
Capacidad aplicacin
Application capacity
Tc=-18C t1=7K
Tc=-25C t1=6K
W
W
8210
6720
9550
7810
14850
12150
17530
14340
22270
18220
26290
21510
Superficie / Surface
m2
40
53
68
91
102
136
dm3
12,3
16,4
20,1
26,8
29,6
39,4
m3/h
7280
6830
13500
12520
20250
18780
MODELO
MODEL
500
9 mm
FRL
540
FRL
600
FRL
865
FRL
1160
FRL
1590
FRL
1950
Capacidad nominal
Nominal capacity
Tc=0C t1=8K
9640
11480
17640
20920
26460
31380
Capacidad aplicacin
Application capacity
Tc=-18C t1=7K
Tc=-25C t1=6K
Tc=-40C t1=5K
W
W
W
7420
6070
4920
8840
7230
5850
13580
11110
9000
16110
13180
10670
20370
16670
13490
24160
19770
16000
Superficie / Surface
m2
32
43
55
73
82
109
dm3
12,3
16,4
20,1
26,8
29,6
39,4
m3/h
7500
7100
14000
13100
21000
19650
COMMON DATA
Ventiladores / Fans
3~400V 50Hz 1350 r.p.m
Consumo / Consumption
Potencia absorbida / Power input
nx
A
kW
1x500
1,41
0,72
1x500
1,41
0,72
2x500
2,82
1,44
2x500
2,82
1,44
3x500
4,23
2,16
3x500
4,23
2,16
17
16
19
18
21
20
num.
W
4+2
5200
6+2
7200
4+2
8800
6+2
12200
4+2
13200
6+2
18300
L/h
GAS
2200
1x3/4
3000
1x3/4
3800
2x3/4
5000
2x3/4
5700
3x3/4
7600
3x3/4
15,9
26,9
91
15,9
26,9
102
15,9
33,7
145
15,9
33,7
162
21,3
42,4
206
21,3
42,4
231
Caudal / Flow
Entrada / Inlet
Dp=20 KPa
Entrada / Inlet
Salida / Oulet
Peso neto / Net weight FRM, FRB E, FRL E
mm
mm
Kg
Tc: Temperatura de cmara - Room temperature t1: Salto trmico - Temperature difference
19
EVAPORADORES
SERIE FR 300
SERIE FR 400
20
EVAPORADORES
SERIE FR 500
SERIE FR 630
21
ELECTRIC
1.
2.
3.
4.
POR AGUA
1.
2.
3.
4.
WATER SPREAD
1.
2.
3.
4.
HOT GAS
1. Liquid inlet to the evaporator when working as a cooler.
2. Hot gas connection.
3. Suction header.
4. Tube coil to defrost the bottom tray.
22
DESESCARCHE ELCTRICO DE
ALTA EFICIENCIA E+
DESESCARCHE ESTANDAR
DESESCARCHE ESPECIAL
STANDARD DEFROSTING
ENHANCED DEFROSTING
E+
EVAPORADORES
N
P
2xN
P/2
VENTAJAS
ADVANTAGES
AHORROS
SAVINGS
23
Manta de aislamiento trmico elastomrico de 10mm con proteccin superficial mediante lmina de aluminio.
1. Aislamiento de la bandeja
2. Aislamiento del techo
Shut-up system
Small textile sock attached to the fan motor duct that collapses
and closes the air outlet when the fan motors stops.
3. Textile sock Shut-up system
Metal structure fixed to the back of the evaporator unit that provides
a thermal barrier for the finned coil surface. On the inner sides
there are insulation sheets similar to the one on the bottom tray.
4. Hood
5. Insulation sheet
ACCESIBILIDAD AL INTERIOR
Las gamas de evaporadores cbicos FR, GR
y GNH llevan los laterales (1), los paneles de
los ventiladores (2) y la bandeja inferior (3)
abisagrados. La apertura y el cierre las
puede realizar un solo operario sin herramientas.
Estas puertas permiten un cmodo y rpido
acceso al interior para operaciones de limpieza y mantenimiento.
24
EVAPORADORES
CAPACIDADES NOMINALES
ENTRE 31,8 Y 155 kW
NOMINAL CAPACITIES
BETWEEN 31,8 AND 155 kW
APLICACIONES
APPLICATIONS
High cooling efficiency coil, delivered with sealed circuit with pressured air
inside with valve for manometer connection. Finned coil sections separated and independent for each fan.
Ventiladores de rotor externo, proteccin IP-54 y protector trmico (termocontacto) incorporado. Trifsicos 400V / 50Hz dos velocidades de 630
y 800 mm.
External rotor fan motor, protection IP-54 and with thermal protection
(thermocontact) incorporated. Three phase 400V / 50Hz two speed of
630 and 800 mm.
OPCIONES
OPTIONS
GR B -5400 -E1
25
R-404A
PASO DE ALETAS - FIN SPACING
MODELO
630
4,2 mm
GRM
2450
GRM
2600
GRM
3900
GRM
4600
GRM
4900
44810
52080
67220
78120
67220
34510
MODEL
Capacidad nominal
Nominal capacity
Tc=0C t1=8K
GRM
5500
GRM
6300
GRM
7500
800
GRM
4750
GRM
6350
GRM
7400
GRM
8500
154900
78120 100830 117180 134440 156240 168050 195300 123345 168525 182760
40100 51760 60150 69010 80200 86270 100250 63320 86510 93820
232350
119270
Superficie / Surface
m2
259
346
389
518
518
690
647
863
621
828
1035
1294
m3/h 25500
24140
38250
36210
51000
48280
63750
60350
34600
48300
46050
59200
32
34
33
35
34
36
35
28
29
29
30
33
MODELO
630
6 mm
GRB
1740
GRB
2300
GRB
3300
GRB
3850
GRB
4650
GRB
5200
40480
48300
60715
72450
80955
60720
31170
72450
37190
MODEL
Capacidad nominal
Nominal capacity
Tc=0C t1=8K
GRB
5400
GRB
6500
800
GRB
4000
GRB
5450
GRB
6450
GRB
8100
147900
221850
113880
Superficie / Surface
m2
187
249
280
373
373
497
466
622
447
596
745
932
m3/h 27080
25840
40620
38760
54160
51680
67700
64600
36900
51900
49650
63600
34
33
35
34
36
35
37
36
29
30
30
31
COMMON DATA
Ventiladores / Fans
Consumo / Consumption
Potencia absorbida / Power input
Volumen interior / Circuit Volume
nx
A
W
dm3
2x630
6,4
3800
54
2x630
6,4
3800
72
3x630
9,6
5700
80
3x630
9,6
5700
107
4x630
12,8
7600
106
4x630
12,8
7600
141
5x630
16,0
9500
132
5x630
16,0
9500
176
2x800
7,8
3600
128
3x800
11,7
5400
170
3x800
11,7
5400
213
4x800
15,6
7200
265
num.
4+7
W
17600
4+10
24200
4+7
26400
4+10
36300
4+7
35200
4+10
48400
4+7
44000
4+10
60500
4+10
36300
4+10
48400
4+13
61600
4+13
77000
Reducido E0 / Reduced E0
Bandeja + Bateria / Drip tray + Coil
Potencia / Power
num.
4+4
W
11000
4+5
13200
4+4
16500
4+5
19800
4+4
22000
4+5
26400
4+4
27500
4+5
33000
4+5
19800
4+5
26400
4+7
35200
4+7
44000
8000
30
2x1
9000
20
3x1
12000
30
3x1
12000
20
4x1
16000
30
4x1
15000
20
5x1
20000
30
5x1
12000
30
2x1
16000
30
3x1
20000
30
3x1
25000
30
4x1
28
66
436
420
35
66
497
474
35
66
567
546
35
66
649
619
35
66
699
672
2x28
2x66
801
763
35
66
573
542
35
66
760
718
35
66
858
804
2x28
2x66
1070
1002
6000
20
2x1
Tc: Temperatura de cmara - Room temperature t1: Salto trmico - Temperature difference
26
R-404A
MODELO
630
9 mm
800
GRL
1600
GRL
1830
GRL
2600
GRL
3450
GRL
4100
GRL
5000
GRL
5150
GRL
6000
GRL
3600
GRL
5350
GRL
6050
GRL
7700
35335
43050
53000
64575
70665
86100
88330 107625
69400
95210 108080
137000
Tc=-18C t1=7K
Capacidades aplicacin
Tc=-25C t1=6K
Application capacities
Tc=-40C t1=5K
W
W
W
27210
22260
18020
33150
27120
21960
40810
33390
27030
49720
40680
32930
54410
44520
36040
66300
54240
43910
68020
55650
45050
53440
43720
35390
73310
59980
48560
105490
86310
69870
Superficie / Surface
m2
129
172
193
258
258
343
322
429
309
412
514
643
m3/h 28760
27640
43140
41460
57520
55280
71900
69100
39400
55650
53700
69000
34
36
35
37
36
38
37
29
30
30
31
MODEL
Capacidad nominal
Nominal capacity
Tc=0C t1=8K
35
MODELO
82870
67800
54890
83220
68090
55120
630
12 mm
800
GRX
1550
GRX
1790
GRX
2350
GRX
2950
GRX
3350
GRX
4550
GRX
4700
GRX
5800
GRX
3000
GRX
5100
GRX
5850
GRX
7250
31815
39345
47725
59015
63630
78685
79540
98360
63580
87600 100760
127750
Tc=-18C t1=7K
Capacidades aplicacin
Tc=-25C t1=6K
Application capacities
Tc=-40C t1=5K
W
W
W
24500
20040
16230
30290
24790
20070
36750
30070
24340
45440
37180
30100
49000
40090
32450
60590
49570
40130
61240
50110
40560
75740
61970
50160
48960
40060
32430
67450
55190
44680
Superficie / Surface
m2
100
134
150
200
200
267
250
333
239
319
399
499
m3/h 29840
28800
44760
43200
59680
57600
74600
72000
40900
58350
56400
72600
35
37
36
38
37
39
38
30
31
31
32
MODEL
Capacidad nominal
Nominal capacity
Tc=0C t1=8K
36
77590
63480
51390
98370
80480
65150
COMMON DATA
Ventiladores / Fans
Consumo / Consumption
Potencia absorbida / Power input
Volumen interior / Circuit Volume
nx
A
W
dm3
2x630
6,4
3800
54
2x630
6,4
3800
72
3x630
9,6
5700
80
3x630
9,6
5700
107
4x630
12,8
7600
106
4x630
12,8
7600
141
5x630
16,0
9500
132
5x630
16,0
9500
176
2x800
7,8
3600
128
3x800
11,7
5400
170
3x800
11,7
5400
213
4x800
15,6
7200
265
num.
4+7
W
17600
4+10
24200
4+7
26400
4+10
36300
4+7
35200
4+10
48400
4+7
44000
4+10
60500
4+10
36300
4+10
48400
4+13
61600
4+13
77000
Reducido E0 / Reduced E0
Bandeja + Bateria / Drip tray + Coil
Potencia / Power
num.
4+4
W
11000
4+5
13200
4+4
16500
4+5
19800
4+4
22000
4+5
26400
4+4
27500
4+5
33000
4+5
19800
4+5
26400
4+7
35200
4+7
44000
8000
30
2x1
9000
20
3x1
12000
30
3x1
12000
20
4x1
16000
30
4x1
15000
20
5x1
20000
30
5x1
12000
30
2x1
16000
30
3x1
20000
30
3x1
25000
30
4x1
28
66
406
395
35
66
456
441
35
66
527
512
35
66
594
574
35
66
649
630
2x28
2x66
732
707
35
66
519
502
35
66
689
665
35
66
767
738
2x28
2x66
956
919
6000
20
2x1
Tc: Temperatura de cmara - Room temperature t1: Salto trmico - Temperature difference
27
EVAPORADORES
SERIE GR 630
SERIE GR 800
28
EVAPORADORES
CAPACIDADES NOMINALES
ENTRE 1,7 Y 14 kW
NOMINAL CAPACITIES
BETWEEN 1,7 AND 14 kW
APLICACIONES
APPLICATIONS
Serie ECM
Cmaras de conservacin gnero fresco a 0/+2C.
Cmaras de conservacin de congelados hasta -20C.
Series ECM
Delicate fresh goods at 0/+2C.
Preservation of frozen products down to -20C.
Serie ECB
Cmaras de baja temperatura hasta -30C.
Series ECB
Low temperature rooms down to -30C.
Batera en tubo de cobre de 1/2" estriado interiormente y aletas corrugadas de aluminio de alta eficiencia.
Coil manufactured with 1/2" O.D. Internally grooved copper tube and
corrugated aluminium fins of high efficiency.
Circuito cerrado y presin remanente de aire seco en el interior para comprobacin de estanqueidad.
Sealed circuit with pressure air inside to assure the coil is received totally
leak free.
Casing made of painted aluminium and galvanised steel with high corrosion resistance and rigidity.
Amplios laterales abisagrados que facilitan el acceso al interior para instalacin y mantenimiento.
Large hinged side covers to ease the access to the inside for instalation
and maintenance operation.
External rotor fan motor 1~230V 50/60Hz, protection IP-44, thermal protection
(thermocontact).
OPCIONES
OPTIONS
Desescarche elctrico mediante resistencias de acero inoxidable conectadas a una caja de conexiones IP-55.
Aletas de cobre o de aluminio pretratadas
Batera tratada con resina poliuretano (consultar oficina tcnica de
Frimetal).
Electric defrosting carried out by stainless steel heaters connected to a IP55 junction box.
Copper or pretreated aluminium fins
Coated coil with polyurethane resin (consult the technical department of
Frimetal).
EC B -155 -E
Desescarche - Defrosting E: Elctrico - Electric
GC: Gas caliente - Hot gas
N Modelo - Model Nr.
Sep. aletas - Fin spacing M: 4,2 mm.
B: 7 mm.
Serie modelo - Model serie
29
R-404A
PASO DE ALETAS - FIN SPACING
MODELO
MODEL
Capacidad nominal
Tc=0C t1=8K
W
Nominal capacity
Aplicacin / Application Tc=-18C t1=7K W
300
4,2 mm
400
ECM
130
ECM
150
ECM
200
ECM
250
ECM
290
ECM
390
ECM
470
ECM
530
ECM
330
ECM
460
ECM
585
ECM
830
2230
2610
3380
4450
5230
7090
8330
10450
6590
7910
11720 14040
1720
2010
2600
3430
4030
5460
6410
8050
5070
6090
9020 10810
8,6
11,5
11,5
17,3
23,0
28,4
37,9
46,0
24,2
32,2
39,8
53,1
7640
Superficie / Surface
m2
m3/h
1320
1270
2780
2640
2540
4110
3960
5080
4250
4100
8040
kW
1,78
2,09
2,70
3,56
4,18
5,67
6,66
8,36
5,27
6,33
9,38 11,23
400
ECB
95
ECB
120
ECB
155
ECB
195
ECB
275
ECB
320
ECB
380
ECB
240
ECB
310
ECB
420
2190
2680
3580
4380
5780
7050
8750
5270
6490
9420 11600
Tc=-18C t1=7K W
Tc=-25C t1=6K W
1690
1380
2060
1690
2760
2260
3370
2760
4450
3640
5430
4440
6740
5510
4060
3320
5000
4090
7250
5940
MODELO
MODEL
Capacidad nominal
Nominal capacity
Aplicaciones
Applications
300
7 mm
Tc=0C t1=8K
ECB
470
8930
7310
Superficie / Surface
m2
7,2
7,2
10,8
14,4
17,8
23,8
28,9
15,2
20,2
25,0
33,3
m3/h
1360
2900
2800
2720
4350
4230
5440
4415
4280
8420
8100
kW
1,75
2,14
2,86
3,50
4,62
5,64
7,00
4,22
5,19
7,54
9,28
COMMON DATA
VENTILADORES / FANS
Tipo / Type
Ventiladores / Fans
num.
Dimetro / Diameter
mm.
300
300
300
300
300
300
300
300
400
400
400
400
Consumo / Consumption
A.
0,38
0,38
0,76
0,76
0,76
1,14
1,14
1,52
1,3
1,3
2,6
2,6
W.
80
80
160
160
160
240
240
320
300
300
600
600
12
12
13
13
13
14
14
14
15
15
16
16
dm3
2,0
2,6
2,3
3,5
4,7
5,5
7,3
8,8
4,9
6,5
7,1
10,3
Batera / Coil
num.
Total / Total
num.
Potencia / Power
760
1140
1700
1700
2550
2800
4200
5100
2550
3400
4200
5600
S mm
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
5/8
1/2
22
22
22
22
22
22
22
22
22
22
28
ECM
Kg
15
17
23
26
29
39
44
54
35
39
57
65
ECB
Kg
15
16
22
25
28
38
42
52
34
38
55
62
Tc: Temperatura de cmara - Room temperature t1: Salto trmico - Temperature difference
30
EVAPORADORES
SERIE EC 300
SERIE EC 400
31
EVAPORADORES
Comercial
CAPACIDADES NOMINALES
ENTRE 1,6 Y 25,7 kW
NOMINAL CAPACITIES
BETWEEN 1,6 AND 25,7 kW
APLICACIONES
APPLICATIONS
Serie PIA
Gnero fresco delicado por encima de +5C
Salas de trabajo, despiece, envasado, etc.
Serie PIM
Cmaras de conservacin de gnero fresco a 0/+2C
Serie PIB
Cmaras de conservacin de congelados hasta -20C
Series PIA
Delicate fresh goods at more than +5C
Conditioning of working rooms
Series PIM
Rooms for preservation of fresh goods at 0 / +2C
Series PIB
Preservation of frozen products down to -20C
Normal version N with 4 pole motors and silent S with 6 poles motors for
those applications requiring low sound level or low air flow.
Coil manufactured with 1/2" O.D. internally grooved copper tube and
corrugated aluminium fins of high efficiency. Delivered with sealed circuit
with pressured air inside to assure the coil is received totally leak free and
valve for manometer connection. Finned coil sections separated and independent for each fan.
Casing made of aluminium and galvanised sheet coated in a corrosion
resistant white polyester RAL-9002.
Axial fans with external rotor, 1~230V 50/60Hz (300) y 50Hz (400).
Protection IP-44 and thermal protection (Thermocontact).
OPCIONES
OPTIONS
PI M N -44 -E
Desescarche - Defrosting E: Elctrico - Electric
E+: Elctrico de alta eficiencia - Electric of high efficiency
GC: Gas caliente - Hot gas
N Modelo - Model Nr.
Ventiladores - Fan motors
33
GAMA COMERCIAL
- COMMERCIAL RANGE
Capacidad nominal
Tc=0C t1=8K
Nominal capacity
R-404A
300
2,8 mm
PIA-N PIA-N
26
29
PIA-N
57
PIA-N
67
PIA-N
89
PIA-N
96
400
PIA-N PIA-N
112
114
PIA-N PIA-N
150
160
PIA-N
205
PIA-N
220
2950
3250
5900
6500
9090
10010
12400
13800
18600
20700
23250
25700
Capacidad aplicacin
Tc=+10C t1=10K W
Application capacity
4430
4880
8850
9750
13640
15020
18600
20700
27900
31050
34880
38550
Superficie / Surface
m2
17,5
26,2
34,9
52,4
54,0
81,0
66,7
100
100
150
121
182
m3/h
1260
1100
2520
2200
3880
3390
5450
4800
8175
7200
10300
8970
kW
2,4
2,6
4,7
5,2
7,3
8,0
9,9
11,0
14,9
16,6
18,6
20,6
4,2 mm
300
400
PIM-N PIM-N PIM-N PIM-N PIM-N PIM-N PIM-N PIM-N PIM-N PIM-N PIM-N PIM-N
18
20
40
44
55
60
72
80
90
115
118
125
NORMAL VERSION
Capacidad nominal
Tc=0C t1=8K
Nominal capacity
2575
3020
5150
6040
7930
9300
10660
12760
15990
19140
20100
23800
Capacidad aplicacin
Tc=-18C t1=7K
Application capacity
1980
2330
3970
4650
6110
7160
8210
9830
12310
14740
15480
18330
Superficie / Surface
m2
11,9
17,9
23,8
35,7
36,8
55,2
45,5
68,2
68,2
102
82,9
124
m3/h
1340
1210
2680
2420
4130
3730
5800
5250
8700
7875
11100
9850
kW
2,1
2,4
4,1
4,8
6,3
7,4
8,5
10,2
12,8
15,3
16,1
19,0
PIB-N PIB-N
15
17
NORMAL VERSION
Capacidad nominal
Nominal capacity
Tc=0C t1=8K
7 mm
300
PIB-N
35
PIB-N
41
PIB-N
45
PIB-N
53
400
PIB-N PIB-N
58
75
PIB-N PIB-N
82
92
PIB-N
119
2200
2675
4400
5350
6700
8240
8800
11220
13200
16830
21180
W
W
1690
1390
2060
1690
3390
2770
4120
3370
5160
4220
6340
5190
6780
5540
8640
7070
10160
8320
12960
10600
16310
13340
Superficie / Surface
m2
m3/h
kW
7,5
11,2
14,9
22,4
23,1
34,6
28,5
42,8
42,8
64,2
78,0
1420
1310
2840
2620
4370
4030
6000
5700
9000
8550
10900
1,8
2,1
3,5
4,3
5,4
6,6
7,0
9,0
10,6
13,5
16,9
COMMON DATA
N x dimetro / Nr x diameter
Consumo / Consumption
Potencia absorbida / Power input
Presin sonora / Sound pressure (1)
Volumen interno / Circuit volume
A
W
dB(A)
dm3
1x300
0,32
72
33
2,6
1x300
0,32
72
33
3,8
2x300
0,64
144
36
4,7
2x300
0,64
144
36
7,1
3x300
0,96
216
38
7,1
3x300
0,96
216
38
10,6
2x400
1,32
300
45
8,8
2x400
1,32
300
45
13,2
3x400
1,98
450
47
12,9
3x400
1,98
450
47
19,4
4x400
2,64
600
48
15,6
4x400
2,64
600
48
23,4
2+2
2200
2+2
2200
2+2
4400
2+2
4400
2+2
6800
2+2
6800
2+2
5600
4+2
8400
2+2
8400
4+2
12600
2+2
10200
4+2
15300
1/2
22
42
1/2
22
59
1/2
22
66
1/2
22
82
1/2
22
92
1/2
28
88
1/2
28
102
5/8
35
123
5/8
35
142
5/8
35
149
5/8
35
173
num.
W
Entrada / Inlet
Salida / Oulet
Peso neto / Net weight PIA, PIM, PIB E
mm
Kg
1/2
22
39
(1) Presin sonora a 10m sin reflexin - Sound pressure at 10m echo free Tc: Temperatura de cmara - Room temperature t1: Salto trmico - Temperature difference
34
- COMMERCIAL RANGE
2,8 mm
R-404A
300
400
PIA-S
26
PIA-S
57
PIA-S
89
PIA-S
112
PIA-S
114
PIA-S
150
PIA-S
160
PIA-S
205
PIA-S
220
2100
4200
6470
10500
11500
15750
17250
19750
21500
Capacidad aplicacin
Tc=+10C t1=10K W
Application capacity
3150
6300
9710
15750
17250
23630
25880
29630
32250
Superficie / Surface
m2
17,5
34,9
54,0
66,7
100
100
150
121
182
m3/h
790
1580
2430
4290
3810
6435
5715
8150
7150
kW
1,7
3,4
5,2
8,4
9,2
12,6
13,8
15,8
17,2
SILENT VERSION
Capacidad nominal
Tc=0C t1=8K
Nominal capacity
PIM-S PIM-S
18
20
SILENT VERSION
4,2 mm
300
400
PIM-S
40
PIM-S
44
PIM-S
55
PIM-S
60
PIM-S
72
PIM-S
80
PIM-S PIM-S
90
115
PIM-S
118
PIM-S
125
Capacidad nominal
Tc=0C t1=8K
Nominal capacity
1880
2140
3760
4280
5790
6590
9400
10760
14100
16140
17700
20200
Capacidad aplicacin
Tc=-18C t1=7K
Application capacity
1450
1650
2900
3300
4460
5070
7240
8290
10860
12430
13630
15550
Superficie / Surface
m2
11,9
17,9
23,8
35,7
36,8
55,2
45,5
68,2
68,2
102
82,9
124
m3/h
835
760
1670
1520
2570
2340
4550
4150
6825
6225
8700
7820
kW
1,5
1,7
3,0
3,4
4,6
5,3
7,5
8,6
11,3
12,9
14,2
16,2
7 mm
300
400
PIB-S
15
PIB-S
17
PIB-S
35
PIB-S
41
PIB-S
45
PIB-S
53
PIB-S
58
PIB-S
75
PIB-S
82
PIB-S
92
PIB-S
119
1600
1960
3200
3920
4930
6040
7700
9600
11550
14400
18000
W
W
1230
1010
1510
1230
2460
2020
3020
2470
3800
3110
4650
3810
5930
4850
7390
6050
8890
7280
11090
9070
13860
11340
Superficie / Surface
m2
7,5
11,2
14,9
22,4
23,1
34,6
28,5
42,8
42,8
64,2
78,0
m3/h
890
820
1780
1640
2740
2530
4950
4520
7425
6780
8590
kW
1,3
1,6
2,6
3,1
3,9
4,8
6,2
7,7
9,2
11,5
14,4
SILENT VERSION
Capacidad nominal
Nominal capacity
Tc=0C t1=8K
COMMON DATA
N x dimetro / Nr x diameter
Consumo / Consumption
Potencia absorbida / Power input
Presin sonora / Sound pressure (1)
Volumen interno / Circuit volume
A
W
dB(A)
dm3
1x300
0,16
36
27
2,6
1x300
0,16
36
27
3,8
2x300
0,32
72
30
4,7
2x300
0,32
72
30
7,1
3x300
0,48
108
32
7,1
3x300
0,48
108
32
10,6
2x400
1,06
240
35
8,8
2x400
1,06
240
35
13,2
3x400
1,59
360
37
12,9
3x400
1,59
360
37
19,4
4x400
2,12
480
38
15,6
4x400
2,12
480
38
23,4
2+2
2200
2+2
2200
2+2
4400
2+2
4400
2+2
6800
2+2
6800
2+2
5600
4+2
8400
2+2
8400
4+2
12600
2+2
10200
4+2
15300
1/2
22
42
1/2
22
59
1/2
22
66
1/2
22
82
1/2
22
92
1/2
28
88
1/2
28
102
5/8
35
123
5/8
35
142
5/8
35
149
5/8
35
173
num.
W
Entrada / Inlet
Salida / Oulet
Peso neto / Net weight PIA, PIM, PIB E
mm
Kg
1/2
22
39
(1) Presin sonora a 10m sin reflexin - Sound pressure at 10m echo free Tc: Temperatura de cmara - Room temperature t1: Salto trmico - Temperature difference
35
EVAPORADORES
GAMA COMERCIAL
300
VERSIN NORMAL 1350 rpm
PIA-N PIA-N
26
29
NORMAL VERSION
Capacidad nominal
Tc=0C t1=8K
Nominal capacity
PIA-N
57
PIA-N
67
PIA-N
89
PIA-N
96
PIA-N PIA-N
112
114
R-404A
400
2,8 mm
PIA-N PIA-N
150
160
PIA-N
205
PIA-N
220
2340
2720
4680
5440
7210
8380
9960
11580
14940
17370
18720
21650
Capacidad aplicacin
Tc=+10C t1=10K W
Application capacity
3510
4080
7020
8160
10820
12570
14940
17370
22410
26060
28080
32480
Superficie / Surface
m2
17,5
26,2
34,9
52,4
54,0
81,0
66,7
100
100
150
121
182
m3/h
1260
1100
2520
2200
3880
3390
5450
4800
8175
7200
10300
8970
kW
1,9
2,2
3,7
4,4
5,8
6,7
8,0
9,3
12,0
13,9
15,0
17,3
300
VERSIN NORMAL 1350 rpm
4,2 mm
400
PIM-N PIM-N PIM-N PIM-N PIM-N PIM-N PIM-N PIM-N PIM-N PIM-N PIM-N PIM-N
18
20
40
44
55
60
72
80
90
115
118
125
NORMAL VERSION
Capacidad nominal
Tc=0C t1=8K
Nominal capacity
2050
2520
4100
5040
6320
7760
8660
10660
12990
15990
16370
20000
Capacidad aplicacin
Tc=-18C t1=7K
Application capacity
1580
1940
3160
3880
4870
5980
6670
8210
10000
12310
12600
15400
Superficie / Surface
m2
11,9
17,9
23,8
35,7
36,8
55,2
45,5
68,2
68,2
102
82,9
124
m3/h
1340
1210
2680
2420
4130
3730
5800
5250
8700
7875
11100
9850
kW
1,6
2,0
3,3
4,0
5,1
6,2
6,9
8,5
10,4
12,8
13,1
16,0
300
VERSIN NORMAL 1350 rpm
PIB-N PIB-N
15
17
NORMAL VERSION
Capacidad nominal
Nominal capacity
Tc=0C t1=8K
7 mm
PIB-N
35
PIB-N
41
PIB-N
45
PIB-N
53
PIB-N PIB-N
58
75
400
PIB-N PIB-N
82
92
PIB-N
119
1750
2240
3500
4480
5390
6900
7300
9440
10950
14160
17870
W
W
1350
1100
1720
1410
2700
2210
3450
2820
4150
3400
5310
4350
5620
4600
7270
5950
8430
6900
10900
8920
13760
11260
Superficie / Surface
m2
m3/h
kW
7,5
11,2
14,9
22,4
23,1
34,6
28,5
42,8
42,8
64,2
78,0
1420
1310
2840
2620
4370
4030
6000
5700
9000
8550
10900
1,4
1,8
2,8
3,6
4,3
5,5
5,8
7,6
8,8
11,3
14,3
COMMON DATA
N x dimetro / Nr x diameter
Consumo / Consumption
Potencia absorbida / Power input
Presin sonora / Sound pressure (1)
Volumen interno / Circuit volume
A
W
dB(A)
dm3
1x300
0,32
72
33
2,4
1x300
0,32
72
33
3,6
2x300
0,64
144
36
4,5
2x300
0,64
144
36
6,7
3x300
0,96
216
38
6,7
3x300
0,96
216
38
10,0
2x400
1,32
300
45
8,4
2x400
1,32
300
45
12,6
3x400
1,98
450
47
12,3
3x400
1,98
450
47
18,4
4x400
2,64
600
48
14,8
4x400
2,64
600
48
22,2
2+2
2200
2+2
2200
2+2
4400
2+2
4400
2+2
6800
2+2
6800
2+2
5600
4+2
8400
2+2
8400
4+2
12600
2+2
10200
4+2
15300
12,7
21,3
42
12,7
21,3
59
15,9
21,3
66
15,9
21,3
82
15,9
21,3
92
15,9
26,9
88
15,9
26,9
102
15,9
26,9
123
15,9
26,9
142
15,9
42,4
149
21,3
42,4
173
num.
W
Entrada / Inlet
Salida / Oulet
Peso neto / Net weight PIA, PIM, PIB E
mm
Kg
12,7
21,3
39
(1) Presin sonora a 10m sin reflexin - Sound pressure at 10m echo free Tc: Temperatura de cmara - Room temperature t1: Salto trmico - Temperature difference
36
300
VERSIN SILENCIOSA 950 rpm
R-404A
400
2,8 mm
PIA-S
26
PIA-S
57
PIA-S
89
PIA-S
112
PIA-S
114
PIA-S
150
PIA-S
160
PIA-S
205
PIA-S
220
1750
3500
5390
8600
9860
12900
14790
16260
18480
Capacidad aplicacin
Tc=+10C t1=10K W
Application capacity
2630
5250
8090
12900
14790
19350
22190
24390
27720
Superficie / Surface
m2
17,5
34,9
54,0
66,7
100
100
150
121
182
m3/h
790
1580
2430
4290
3810
6435
5715
8150
7150
kW
1,4
2,8
4,3
6,9
7,9
10,3
11,8
13,0
14,8
SILENT VERSION
Capacidad nominal
Tc=0C t1=8K
Nominal capacity
300
VERSIN SILENCIOSA 950 rpm
PIM-S PIM-S
18
20
SILENT VERSION
PIM-S
40
PIM-S
44
PIM-S
55
PIM-S
60
PIM-S
72
PIM-S
80
400
4,2 mm
PIM-S PIM-S
90
115
PIM-S
118
PIM-S
125
Capacidad nominal
Tc=0C t1=8K
Nominal capacity
1550
1850
3100
3700
4774
5698
7570
9160
11355
13740
14300
17260
Capacidad aplicacin
Tc=-18C t1=7K
Application capacity
1190
1420
2390
2850
3680
4390
5830
7050
8740
10580
11010
13290
Superficie / Surface
m2
11,9
17,9
23,8
35,7
36,8
55,2
45,5
68,2
68,2
102
82,9
124
m3/h
835
760
1670
1520
2570
2340
4550
4150
6825
6225
8700
7820
kW
1,2
1,5
2,5
3,0
3,8
4,6
6,1
7,3
9,1
11,0
11,4
13,8
300
VERSIN SILENCIOSA 950 rpm
400
7 mm
PIB-S
15
PIB-S
17
PIB-S
35
PIB-S
41
PIB-S
45
PIB-S
53
PIB-S
58
PIB-S
75
PIB-S
82
PIB-S
92
PIB-S
119
1330
1660
2660
3320
4096
5113
6560
8180
9840
12270
15450
W
W
1020
840
1280
1050
2050
1680
2560
2090
3150
2580
3940
3220
5050
4130
6300
5150
7580
6200
9450
7730
11900
9730
Superficie / Surface
m2
7,5
11,2
14,9
22,4
23,1
34,6
28,5
42,8
42,8
64,2
78,0
m3/h
890
820
1780
1640
2740
2530
4950
4520
7425
6780
8590
kW
1,1
1,3
2,1
2,7
3,3
4,1
5,2
6,5
7,9
9,8
12,4
SILENT VERSION
Capacidad nominal
Nominal capacity
Tc=0C t1=8K
COMMON DATA
N x dimetro / Nr x diameter
Consumo / Consumption
Potencia absorbida / Power input
Presin sonora / Sound pressure (1)
Volumen interno / Circuit volume
A
W
dB(A)
dm3
1x300
0,16
36
27
2,4
1x300
0,16
36
27
3,6
2x300
0,32
72
30
4,5
2x300
0,32
72
30
6,7
3x300
0,48
108
32
6,7
3x300
0,48
108
32
10,0
2x400
1,06
240
35
8,4
2x400
1,06
240
35
12,6
3x400
1,59
360
37
12,3
3x400
1,59
360
37
18,4
4x400
2,12
480
38
14,8
4x400
2,12
480
38
22,2
2+2
2200
2+2
2200
2+2
4400
2+2
4400
2+2
6800
2+2
6800
2+2
5600
4+2
8400
2+2
8400
4+2
12600
2+2
10200
4+2
15300
12,7
21,3
42
12,7
21,3
59
15,9
21,3
66
15,9
21,3
82
15,9
21,3
92
15,9
26,9
88
15,9
26,9
102
15,9
26,9
123
15,9
26,9
142
15,9
42,4
149
21,3
42,4
173
num.
W
Entrada / Inlet
Salida / Oulet
Peso neto / Net weight PIA, PIM, PIB E
mm
Kg
12,7
21,3
39
(1) Presin sonora a 10m sin reflexin - Sound pressure at 10m echo free Tc: Temperatura de cmara - Room temperature t1: Salto trmico - Temperature difference
37
EVAPORADORES
SERIE PI 300
SERIE PI 400
38
EVAPORADORES
Industrial
CAPACIDADES NOMINALES
ENTRE 8,4 Y 60 kW
NOMINAL CAPACITIES
BETWEEN 8,4 AND 60 kW
APLICACIONES
APPLICATIONS
Serie PIM
Conservacin de gneros frescos a 0/+2 C o de congelados hasta -18 C.
Serie PIB
Conservacin de congelados a baja temperatura hasta -30 C.
Serie PIL
Cmaras de muy baja temperatura y tneles de congelacin hasta -40 C.
Series PIM
Preservation of fresh goods at 0/+2 C and frozen produts at -18 C.
Series PIB
Preservation of frozen product at low temperature down to -30 C.
Series PIL
Low temperature rooms and tunnels down to -40 C.
Batera en tubo de cobre de 1/2" estriado interiormente y aletas corrugadas de alta eficiencia. Se entregan con el circuito cerrado con aire a presin en el interior para comprobacin de la estanqueidad y con vlvula
de obs para conexin de manmetro. Cada ventilador va separado con
plenum independiente.
Carcasa exterior en chapa de aluminio y galvanizada lacada en resina
poliester blanco RAL-9002.
Ventiladores con motor de rotor externo, trifsicos 400V/ 50Hz, dos velocidades y dimetro de 500 mm.
Conexin : Alta velocidad 1.300 r.p.m. (Conexin estandar)
Conexin Y: Baja velocidad 900 r.p.m.
Con proteccin IP-54 y protector trmico (Termocontacto).
Coil manufactured with 1/2" O.D. internally grooved copper tube and
corrugated aluminium fins of high efficiency. Delivered with sealed circuit
with pressured air inside to assure the coil is received totally leak free and
with valve for manometer connection. Finned coil sections separated and
independent for each fan.
Casing made of aluminium and galvanised sheet coated in a corrosion
resistant white polyester RAL-9002.
Axial fans with external rotor, three phase motors 400V / 50Hz two speed
and fan diameter of 500 mm.
Connection : High speed 1.300 r.p.m. (Standard connection)
Connection Y: Low speed 900 r.p.m.
Protection IP-54 and with thermal protection (Thermocontact).
OPCIONES
OPTIONS
PI M -900 -E
Conexin - Connection : Normal - Normal
Y: Silencioso - Silent
Desescarche - Defrosting E: Elctrico - Electric
E+: Elctrico de alta eficiencia - Electric of high efficiency
N Modelo - Model Nr.
GC: Gas caliente - Hot gas
Sep. aletas - Fin spacing M: 4,2 mm.
B: 7 mm.
L: 9 mm.
Serie modelo - Model serie
39
GAMA INDUSTRIAL
- INDUSTRIAL RANGE
CONEXIN - CONNECTION
MODELO
MODEL
R-404A
500
4,2 mm
PIM
900
PIM
1300
PIM
1700
PIM
1900
PIM
2400
PIM
2850
PIM
3100
Capacidad nominal
Nominal capacity
Tc=0C t1=8K
13150
16230
26300
32450
39450
48680
60000
Capacidad de aplicacin
Application capacity
Tc=+10C t1=10K
Tc=-18C t1=7K
W
W
19725
10130
24345
12500
39450
20250
48675
24990
59175
30380
73020
37480
90000
46200
m3/h
7000
6700
14000
13400
21000
20100
25400
Superficie / Surface
m2
46,0
69,0
92,1
138
138
207
244
kW
10,5
13,0
21,0
26,0
31,6
38,9
48,0
CONEXIN - CONNECTION
MODELO
MODEL
500
7 mm
PIB
550
PIB
750
PIB
1000
PIB
1350
PIB
1550
PIB
2150
PIB
2600
Capacidad nominal
Nominal capacity
Tc=0C t1=8K
10450
13660
20900
27330
31350
40990
50700
Capacidad de aplicacin
Application capacity
Tc=-18C t1=7K
Tc=-25C t1=6K
W
W
8050
6580
10520
8610
16090
13170
21040
17220
24140
19750
31560
25820
39040
31940
m3/h
7350
7100
14700
14200
22050
21300
27200
Superficie / Surface
m2
28,9
43,3
57,7
86,6
86,6
130
153
kW
8,4
10,9
16,7
21,9
25,1
32,8
40,6
CONEXIN - CONNECTION
MODELO
MODEL
500
9 mm
PIL
400
PIL
650
PIL
850
PIL
1150
PIL
1500
PIL
1950
PIL
2450
Capacidad nominal
Nominal capacity
Tc=0C t1=8K
9250
12350
18500
24700
27750
37050
45950
Capacidad de aplicacin
Application capacity
Tc=-25C t1=6K
Tc=-40C t1=5K
W
W
5830
4720
7780
6300
11660
9440
15560
12600
17480
14150
23340
18900
28950
23430
m3/h
7450
7250
14900
14500
22350
21750
28000
Superficie / Surface
m2
23,2
34,7
46,3
69,5
69,5
104
123
kW
7,4
9,9
14,8
19,8
22,2
29,6
36,8
2x500
3x500
3x500
4x500
COMMON DATA
nx
1x500
1x500
2x500
db(A)(1)
42
42
45
45
47
47
48
dm3
9,2
13,8
17,7
26,6
26,2
39,3
46,0
6
5100
8
6800
6
10200
8
13600
6
15300
8
20400
8
24000
E/S(2) mm
16/28
16/35
16/42
22/42
28/54
28/54
28/54
Kg
83
85
84
94
96
94
141
144
141
163
165
162
199
203
199
231
234
229
277
280
274
Peso neto
Net weight
Tc: Temperatura de cmara - Room temperature t1: Salto trmico - Temperature difference
(1) Nivel sonoro db(A) a 10m sin reflexin - Sound level db(A) at 10m echo free (2) E: Entrada - Inlet S: Salida - Outlet
40
- INDUSTRIAL RANGE
CONEXIN - CONNECTION
MODELO
MODEL
R-404A
500
4,2 mm
PIM
900
PIM
1300
PIM
1700
PIM
1900
PIM
2400
PIM
2850
PIM
3100
Capacidad nominal
Nominal capacity
Tc=0C t1=8K
11450
13710
22900
27430
34350
41140
50150
Capacidad de aplicacin
Application capacity
Tc=+10C t1=10K
Tc=-18C t1=7K
W
W
17175
8820
20565
10560
34350
17630
41145
21120
51525
26450
61710
31680
75225
38620
m3/h
5700
5300
11400
10600
17100
15900
19800
Superficie / Surface
m2
46,0
69,0
92,1
138
138
207
244
kW
9,2
11,0
18,3
21,9
27,5
32,9
40,1
CONEXIN - CONNECTION
MODELO
MODEL
500
7 mm
PIB
550
PIB
750
PIB
1000
PIB
1350
PIB
1550
PIB
2150
PIB
2600
Capacidad nominal
Nominal capacity
Tc=0C t1=8K
9350
11940
18700
23880
28050
35810
43700
Capacidad de aplicacin
Application capacity
Tc=-18C t1=7K
Tc=-25C t1=6K
W
W
7200
5890
9190
7520
14400
11780
18390
15040
21600
17670
27570
22560
33650
27530
m3/h
6150
5800
12300
11600
18450
17400
21800
Superficie / Surface
m2
28,9
43,3
57,7
86,6
86,6
130
153
kW
7,5
9,6
15,0
19,1
22,4
28,7
35,0
CONEXIN - CONNECTION
MODELO
MODEL
500
9 mm
PIL
400
PIL
650
PIL
850
PIL
1150
PIL
1500
PIL
1950
PIL
2450
Capacidad nominal
Nominal capacity
Tc=0C t1=8K
8350
10940
16700
21880
25050
32810
40100
Capacidad de aplicacin
Application capacity
Tc=-25C t1=6K
Tc=-40C t1=5K
W
W
5260
4260
6890
5580
10520
8520
13780
11160
15780
12780
20670
16730
25260
20450
m3/h
6350
6050
12700
12100
19050
18150
22600
Superficie / Surface
m2
23,2
34,7
46,3
69,5
69,5
104
123
kW
6,7
8,8
13,4
17,5
20,0
26,3
32,1
COMMON DATA
nx
1x500
1x500
2x500
2x500
3x500
3x500
4x500
db(A)(1)
37
37
40
40
42
42
43
dm3
9,2
13,8
17,7
26,6
26,2
39,3
46,0
6
5100
8
6800
6
10200
8
13600
6
15300
8
20400
8
24000
E/S(2) mm
16/28
16/35
16/42
22/42
28/54
28/54
28/54
Kg
83
85
84
94
96
94
141
144
141
163
165
162
199
203
199
231
234
229
277
280
274
PIM
PIB E
PIL E
Tc: Temperatura de cmara - Room temperature t1: Salto trmico - Temperature difference
(1) Nivel sonoro db(A) a 10m sin reflexin - Sound level db(A) at 10m echo free (2) E: Entrada - Inlet S: Salida - Outlet
41
EVAPORADORES
GAMA INDUSTRIAL
GAMA INDUSTRIAL
- INDUSTRIAL RANGE
CONEXIN - CONNECTION
MODELO
MODEL
4,2 mm
R-404A
500
PIM
900
PIM
1300
PIM
1700
PIM
1900
PIM
2400
PIM
2850
PIM
3100
Capacidad nominal
Nominal capacity
Tc=0C t1=8K
10350
12960
20700
25920
31050
38880
47600
Capacidad de aplicacin
Application capacity
Tc=+10C t1=10K
Tc=-18C t1=7K
W
W
15525
7970
19440
9980
31050
15940
38880
19960
46575
23910
58320
29940
71400
36650
m3/h
7000
6700
14000
13400
21000
20100
25400
Superficie / Surface
m2
46,0
69,0
92,1
138
138
207
244
kW
8,3
10,4
16,6
20,7
24,8
31,1
38,1
CONEXIN - CONNECTION
MODELO
MODEL
7 mm
500
PIB
550
PIB
750
PIB
1000
PIB
1350
PIB
1550
PIB
2150
PIB
2600
Capacidad nominal
Nominal capacity
Tc=0C t1=8K
8380
11000
16760
22000
25140
33000
40660
Capacidad de aplicacin
Application capacity
Tc=-18C t1=7K
Tc=-25C t1=6K
W
W
6450
5280
8470
6930
12900
10560
16940
13860
19360
15840
25410
20790
31310
25620
m3/h
7350
7100
14700
14200
22050
21300
27200
Superficie / Surface
m2
28,9
43,3
57,7
86,6
86,6
130
153
kW
6,7
8,8
13,4
17,6
20,1
26,4
32,5
CONEXIN - CONNECTION
MODELO
MODEL
9 mm
500
PIL
400
PIL
650
PIL
850
PIL
1150
PIL
1500
PIL
1950
PIL
2450
Capacidad nominal
Nominal capacity
Tc=0C t1=8K
7440
9960
14880
19920
22320
29880
36880
Capacidad de aplicacin
Application capacity
Tc=-25C t1=6K
Tc=-40C t1=5K
W
W
4690
3790
6280
5080
9370
7590
12550
10160
14060
11380
18820
15240
23230
18810
m3/h
7450
7250
14900
14500
22350
21750
28000
Superficie / Surface
m2
23,2
34,7
46,3
69,5
69,5
104
123
kW
6,0
8,0
11,9
15,9
17,9
23,9
29,5
2x500
3x500
3x500
4x500
COMMON DATA
nx
1x500
1x500
2x500
db(A)(1)
42
42
45
45
47
47
48
dm3
9,2
13,8
17,7
26,6
26,2
39,3
46,0
6
5100
8
6800
6
10200
8
13600
6
15300
8
20400
8
24000
E/S(2) mm
15,9/26,9
15,9/26,9
15,9/42,4
21,3/42,4
21,3/42,4
26,9/42,4
26,9/42,4
Kg
83
85
84
94
96
94
141
144
141
163
165
162
199
203
199
231
234
229
277
280
274
Peso neto
Net weight
Tc: Temperatura de cmara - Room temperature t1: Salto trmico - Temperature difference
(1) Nivel sonoro db(A) a 10m sin reflexin - Sound level db(A) at 10m echo free (2) E: Entrada - Inlet S: Salida - Outlet
42
- INDUSTRIAL RANGE
CONEXIN - CONNECTION
MODELO
MODEL
R-404A
4,2 mm
500
PIM
900
PIM
1300
PIM
1700
PIM
1900
PIM
2400
PIM
2850
PIM
3100
Capacidad nominal
Nominal capacity
Tc=0C t1=8K
8950
11050
17900
22100
26850
33150
40590
Capacidad de aplicacin
Application capacity
Tc=+10C t1=10K
Tc=-18C t1=7K
W
W
13430
6890
16580
8510
26850
13780
33150
17020
40280
20680
49730
25530
60890
31250
m3/h
5700
5300
11400
10600
17100
15900
19800
Superficie / Surface
m2
46,0
69,0
92,1
138
138
207
244
kW
7,2
8,8
14,3
17,7
21,5
26,5
32,5
CONEXIN - CONNECTION
MODELO
MODEL
7 mm
500
PIB
550
PIB
750
PIB
1000
PIB
1350
PIB
1550
PIB
2150
PIB
2600
Capacidad nominal
Nominal capacity
Tc=0C t1=8K
7390
9600
14780
19200
22170
28800
35330
Capacidad de aplicacin
Application capacity
Tc=-18C t1=7K
Tc=-25C t1=6K
W
W
5690
4660
7390
6050
11380
9310
14780
12100
17070
13970
22180
18140
27200
22260
m3/h
6150
5800
12300
11600
18450
17400
21800
Superficie / Surface
m2
28,9
43,3
57,7
86,6
86,6
130
153
kW
5,9
7,7
11,8
15,4
17,7
23,0
28,3
CONEXIN - CONNECTION
MODELO
MODEL
9 mm
500
PIL
400
PIL
650
PIL
850
PIL
1150
PIL
1500
PIL
1950
PIL
2450
Capacidad nominal
Nominal capacity
Tc=0C t1=8K
6610
8810
13220
17620
19830
26430
32220
Capacidad de aplicacin
Application capacity
Tc=-25C t1=6K
Tc=-40C t1=5K
W
W
4160
3370
5550
4490
8330
8740
11100
8990
12490
10110
16650
13480
20300
16430
m3/h
6350
6050
12700
12100
19050
18150
22600
Superficie / Surface
m2
23,2
34,7
46,3
69,5
69,5
104
123
kW
5,3
7,0
10,6
14,1
15,9
21,1
25,8
COMMON DATA
nx
1x500
1x500
2x500
2x500
3x500
3x500
4x500
db(A)(1)
37
37
40
40
42
42
43
dm3
9,2
13,8
17,7
26,6
26,2
39,3
46,0
6
5100
8
6800
6
10200
8
13600
6
15300
8
20400
8
24000
E/S(2) mm
15,9/26,9
15,9/26,9
15,9/42,4
21,3/42,4
21,3/42,4
26,9/42,4
26,9/42,4
Kg
83
85
84
94
96
94
141
144
141
163
165
162
199
203
199
231
234
229
277
280
274
PIM
PIB E
PIL E
Tc: Temperatura de cmara - Room temperature t1: Salto trmico - Temperature difference
(1) Nivel sonoro db(A) a 10m sin reflexin - Sound level db(A) at 10m echo free (2) E: Entrada - Inlet S: Salida - Outlet
43
EVAPORADORES
GAMA INDUSTRIAL
SERIE PI 500
44
MONTAJE ANTIGOTEO
Bandejas recogegotas
Como complemento de lo anterior, se pueden colocar unas
bandejas en la zona de salida del aire por la batera a ambos
lados del evaporador que impiden que las gotas arrastradas
caigan al exterior. Estos recogegotas pueden salir de fbrica
ya colocados o ser atornillados posteriormente al aparato de
manera sencilla.
Se pueden acoplar a todos los modelos de las gamas PI comerciales e industriales y se pueden fabricar de diferentes anchuras
segn los casos.
Consulte al Departamento Tcnico de FRIMETAL.
The best choice to assure a total absence of water drops projection to the room is to combine the two stated solutions and
place:
1. Low speed fan motors, S models on commercial PI range or
Y connected fan motors on industrial PI range.
2. Water collector trays at both sides of the unit cooler.
EVAPORADORES
45
46
A variation of the PI design, for commercial and industrial ranges, is the cool ceiling version, valid for all the models of the
series.
Fan motors are placed horizontally in the upper side of the unit
and kept hidden to sight. The air is taken from the room by the
fan motors and thrown through the coils at both sides of the unit
to the outside, the same way as with the standard PI.
With this arrangement, the air flow inside the room is minimal.
The air starts to cool around the ceiling zone and afterwards goes
down softly by density difference until the whole room is cooled
down.
As the fan motors are hidden by the casing, the noise is muffled
and the pressure level is slightly reduced.
For all those reasons, it is a design specially conceived for working and processing rooms, aisles, etc.
Those models include ex-factory the water drop free assembly
with low speed fan motors and water drop collector tray.
EVAPORADORES
CAPACIDADES NOMINALES
ENTRE 29,8 Y 150 kW
NOMINAL CAPACITIES
BETWEEN 29,8 AND 150 kW
APLICACIONES
APPLICATIONS
Dual air discharge evaporators designed for use in fast cooling tunnels for fruit
and vegetables or for freezing tunnels where high air pressure is required,
together with perfect air distribution through the product located on the pallets.
Series TTM / TTB - Medium temperatures.
Series TTL - Low temperatures.
Series TTX - Ultra low temperatures.
High cooling efficiency coil, delivered with sealed circuit with pressured air
inside with valve for manometer connection. Finned coil sections separated and independent for each fan.
Casing made of aluminium and galvanised sheet coated in a corrosion
resistant white polyester RAL-9002.
Axial fans motors three phase 400V/50Hz with two options.
630 mm with external rotor, protection IP-54 and thermally protected
(thermocontact).
710 mm tubular aerofoil type of high pressure and air flow with protection IP-55.
OPCIONES
OPTIONS
TT
M -3000 -E
E: Elctrico - Electric
Desescarche - Defrosting E+: Elctrico de alta eficiencia - Electric of high efficiency
A: Por agua - By water
N Modelo - Model Nr.
GC: Gas caliente - Hot gas
IC: Inversin de ciclo - Cycle inversion
M: 4,2 mm.
Sep. aletas - Fin spacing B: 7 mm.
L: 9 mm.
Serie modelo - Model serie
X: 12 mm.
47
R-404A
PASO DE ALETAS - FIN SPACING
MODELO
MODEL
TTM
2440
TTM
3000
TTM
3700
TTM
6000
TTM
2550
TTM
3850
TTM
4400
TTM
5200
TTM
7600
0 Pa
0 Pa
47600
61700
71400
92550
123400
56600
75100
84900 112650
150200
Tc=-18C t1=7K
36700
47500
55000
71300
95000
43600
57800
65400
86700
115700
m3/h
32500
31400
48750
47100
62800
46600
45000
69900
67500
90000
150
Pa(1)
250
Pa(1)
Tc=0C t1=8K
41400
52700
62100
79050
105400
48600
62400
72900
93600
124800
Tc=-18C t1=7K
31900
40600
47800
60900
81200
37400
48000
56100
72100
96100
m3/h
m2
24800
24000
37200
36000
48000
33800
32000
50700
48000
64000
218
327
327
491
654
218
327
327
491
654
MODELO
MODEL
630
7 mm
TTB
1650
TTB
2350
TTB
2800
710
TTB
3800
TTB
5250
TTB
2100
TTB
3100
TTB
3350
0 Pa
TTB
4800
TTB
6100
0 Pa
Tc=0C t1=8K
40200
53800
60300
80700
107600
47900
65200
71850
97800
130400
Tc=-18C t1=7K
Tc=-25C t1=6K
W
W
m3/h
31000
25300
41400
33900
46400
38000
62100
50800
82900
67800
36900
30200
50200
41100
55300
45300
75300
61600
100400
82200
33800
32800
50700
49200
65600
48800
47400
73200
71100
94800
150 Pa(1)
TTM
4700
Capacidad de aplicacin
Application capacity
Caudal aire / Air flow
710
Tc=0C t1=8K
630
4,2 mm
250 Pa(1)
Tc=0C t1=8K
34900
46400
52350
69600
92800
41500
55400
62250
83100
110800
Tc=-18C t1=7K
Tc=-25C t1=6K
W
W
m3/h
26900
22000
35700
29200
40300
33000
53600
43800
71500
58500
32000
26100
42700
34900
47900
39200
64000
52400
85300
69800
25600
25200
38400
37800
50400
36000
34600
54000
51900
69200
137
205
205
307
410
137
205
205
307
410
Superficie / Surface
m2
COMMON DATA
MOTOVENTILADORES / FAN MOTORS
400V / 3 / 50Hz 1.300 r.p.m.
Consumo / Consumption
Potencia absorbida / Power input
2x630
7,2
4,2
2x630
7,2
4,2
3x630
10,8
6,3
3x630
10,8
6,3
4x630
14,4
8,4
2x710
16,4
8
2x710
16,4
8
3x710
24,6
12
3x710
24,6
12
4x710
32,8
16
num.
W
6+2
16000
10+2
24000
6+2
24000
10+2
36000
10+2
48000
6+2
16000
10+2
24000
6+2
24000
10+2
36000
10+2
48000
7000
20
4x3/4
42
10000
30
4x3/4
63
10500
20
6x3/4
62
15000
30
6x3/4
93
20000
30
8x3/4
123
7000
20
4x3/4
42
10000
30
4x3/4
63
10500
20
6x3/4
62
15000
30
6x3/4
93
20000
30
8x3/4
123
28
66
354
340
28
66
438
425
2x22
2x54
500
480
2x28
2x66
650
622
28
54
405
395
28
66
445
433
28
66
576
563
2x28
2x66
640
620
2x28
2x66
830
805
nx
A.
kW.
(1) Prdida de carga del aire en la cmara / Air drop pressure in the room Tc: Temperatura de cmara - Room temperature t1: Salto trmico - Temperature difference
48
R-404A
MODEL
TTL
1500
TTL
2150
TTL
2500
TTL
2650
TTL
2850
TTL
4200
TTL
5800
0 Pa
36200
49200
54300
73800
98400
43100
59400
64650
89100
118800
Tc=-25C t1=6K
Tc=-40C t1=5K
W
W
m3/h
22800
18100
31000
24600
34200
27200
46500
36900
62000
49200
27200
21600
37400
29700
40700
32300
56100
44600
74800
59400
34200
33400
51300
50100
66800
49600
48200
74400
72300
96400
150
Pa(1)
250
Pa(1)
Tc=0C t1=8K
31500
42500
47250
63750
85000
37800
51100
56700
76650
102200
Tc=-25C t1=6K
Tc=-40C t1=5K
W
W
m3/h
19800
15800
26800
21300
29800
23600
40200
31900
53600
42500
23800
18900
32200
25600
35700
28400
48300
38300
64400
51100
26000
25600
39000
38400
51200
37400
36000
56100
54000
72000
109
164
164
246
328
109
164
164
246
328
m2
MODELO
MODEL
630
12 mm
TTX
1250
TTX
1750
TTX
2000
710
TTX
2900
TTX
4000
TTX
1600
TTX
2200
TTX
2450
0 Pa
TTX
3400
TTX
5300
0 Pa
Tc=0C t1=8K
29800
41300
44700
61950
82600
35100
49300
52650
73950
98600
Tc=-25C t1=6K
Tc=-40C t1=5K
W
W
m3/h
18800
14900
26000
20700
28200
22400
39000
31000
52000
41300
22100
17600
31100
24700
33200
26300
46600
37000
62100
49300
34200
33500
51300
50250
67000
49600
48600
74400
72900
97200
150 Pa(1)
TTL
1700
Superficie / Surface
Capacidad de aplicacin
Application capacity
Caudal aire / Air flow
TTL
5050
Tc=0C t1=8K
TTL
3600
0 Pa
710
250 Pa(1)
Tc=0C t1=8K
26200
35900
39300
53850
71800
31000
42800
46500
64200
85600
Tc=-25C t1=6K
Tc=-40C t1=5K
W
W
m3/h
16500
13100
22600
18000
24800
19700
33900
26900
45200
35900
19500
15500
27000
21400
29300
23300
40400
32100
53900
42800
26000
25500
39000
38250
51000
37400
36000
56100
54000
72000
103
154
154
231
308
103
154
154
231
308
Superficie / Surface
m2
COMMON DATA
MOTOVENTILADORES / FAN MOTORS
400V / 3 / 50Hz 1.300 r.p.m.
Consumo / Consumption
Potencia absorbida / Power input
2x630
7,2
4,2
2x630
7,2
4,2
3x630
10,8
6,3
3x630
10,8
6,3
4x630
14,4
8,4
2x710
16,4
8
2x710
16,4
8
3x710
24,6
12
3x710
24,6
12
4x710
32,8
16
num.
W
6+2
16000
10+2
24000
6+2
24000
10+2
36000
10+2
48000
6+2
16000
10+2
24000
6+2
24000
10+2
36000
10+2
48000
7000
20
4x3/4
42/53
10000
30
4x3/4
63/79
10500
20
6x3/4
62/78
15000
20000
30
30
6x3/4
8x3/4
93/117 123/154
7000
20
4x3/4
42/53
10000
30
4x3/4
63/79
10500
20
6x3/4
62/78
28
66
28
54
333
345
28
66
28
66
417
428
28
54
22
54
390
397
28
66
28
54
425
435
28
66
28
66
555
565
nx
A.
kW.
2x22
2x54
28
66
470
485
2x28
2x66
2x28
2x54
605
627
15000
20000
30
30
6x3/4
8x3/4
93/117 123/154
2x28
2x66
28
66
610
625
(1) Prdida de carga del aire en la cmara / Air drop pressure in the room Tc: Temperatura de cmara - Room temperature t1: Salto trmico - Temperature difference
49
2x28
2x66
2x28
2x54
790
810
EVAPORADORES
MODELO
630
9 mm
SERIE TT 630
50
EVAPORADORES
SERIE TT 710
51
INSTALACIN
INSTALLATION
The included drawing shows the most usual arrangement for this type
of tunnel in which the evaporator(s) is located in the centre of the roof
and occupies the entire length of the tunnel. The pallets holding the
product are located lengthways on both sides, separated by a central
space for suction by the fans. In order to force the air through a closed circuit and the pallets, the space remaining between the upper
part of the pallets and the evaporator is covered with tarpaulin or
other system. For the same reason, it is necessary to close off the tunnel ends as much as possible.
52
EVAPORADORES
CAPACIDADES NOMINALES
ENTRE 10,5 Y 128,5 kW
NOMINAL CAPACITIES
BETWEEN 10,5 AND 128,5 kW
APLICACIONES
APPLICATIONS
Unit coolers specifically designed for freezing tunnels requiring a good air
distribution and an efficient use of the available space.
Series MRB - Medium temperatures.
Series MRL - Low temperatures.
Series MRX - Ultra low temperatures.
High cooling efficiency coil, delivered with sealed circuit with pressured air
inside with valve for manometer connection. Finned coil sections separated and independent for each fan.
Casing made of aluminium and galvanised sheet coated in a corrosion
resistant white polyester RAL-9002.
Axial fans motors three phase 400V/50Hz with two options.
500 and 630 mm with external rotor, protection IP-54 and thermally
protected (thermocontact).
710 mm tubular aerofoil type of high pressure and air flow with protection IP-55.
OPCIONES
OPTIONS
MR L -2550 -E
Desescarche - Defrosting
N Modelo - Model Nr.
Sep. aletas - Fin spacing
Serie modelo - Model serie
E: Elctrico - Electric
E+: Elctrico de alta eficiencia - Electric of high efficiency
GC: Gas caliente - Hot gas
A: Agua - Water
B: 7 mm.
L: 9 mm.
X: 12 mm.
53
R-404A
PASO DE ALETAS - FIN SPACING
MODELO
MODEL
500
7 mm
630
710
MRB
650
MRB
1050
MRB
1450
MRB
2150
MRB
2950
MRB
3750
MRB
4100
MRB
5300
MRB
6400
Capacidad nominal
Nominal capacity
Tc=0C t1=8K
15880
24680
29140
43710
56830
72450
85310
108810
128490
Capacacidad de aplicacin
Application capacity
Tc=-18C t1=7K
Tc=-25C t1=6K
W
W
12230
10000
19000
15550
22440
18360
33660
27540
43760
35800
55790
45640
65690
53750
83780
68550
98940
80950
Superficie / Surface
m2
55
70
93
139
171
192
256
269
358
dm3
m3/h
18
22
29
42
52
58
77
81
108
6850
13400
13000
19500
27000
42000
40500
66600
63900
MODELO
MODEL
500
9 mm
630
710
MRL
600
MRL
865
MRL
1160
MRL
1800
MRL
2550
MRL
3300
MRL
4000
MRL
5100
MRL
5900
Capacidad nominal
Nominal capacity
Tc=0C t1=8K
14700
22580
26780
40160
52760
66020
79010
98180
118260
Capacidad de aplicacin
Application capacity
Tc=-18C t1=7K
Tc=-25C t1=6K
Tc=-40C t1=5K
W
W
W
11320
9260
7500
17390
14230
11520
20620
16870
13660
30920
25300
20480
40630
33240
26910
50840
41590
33670
60840
49780
40300
75600
61850
50070
91060
74500
60310
Superficie / Surface
m2
44
56
74
112
137
154
205
215
287
dm3
18
22
29
42
52
58
77
81
108
m3/h
7050
13700
13400
20100
28200
43800
42300
68400
66000
MODELO
MODEL
500
12 mm
630
710
MRX
520
MRX
710
MRX
960
MRX
1300
MRX
1720
MRX
2300
MRX
2850
MRX
3450
MRX
4850
Capacidad nominal
Nominal capacity
Tc=0C t1=8K
10500
15090
18640
27960
37540
45410
56310
67460
83870
Capacacidad de aplicacin
Application capacity
Tc=-18C t1=7K
Tc=-25C t1=6K
Tc=-40C t1=5K
W
W
W
8090
6620
5360
11620
9510
7700
14350
11740
9510
21530
17610
14260
28910
23650
19150
34970
28610
23160
43360
35480
28720
51940
42500
34400
64580
52840
42770
Superficie / Surface
m2
38
49
65
98
128
144
192
202
269
dm3
21
25
34
50
66
73
97
102
136
m3/h
7500
14600
14000
21000
28600
44250
42900
70500
68100
COMMON DATA
Ventiladores / Fans
400V / 3 / 50Hz 1.350 r.p.m.
Consumo / Consumption
Potencia absorbida / Power input
nx
A
kW
1x500
1,41
0,72
2x500
2,82
1,44
2x500
2,82
1,44
3x500
4,23
2,16
2x630
6,4
3,8
3x630
9,6
5,7
3x630
9,6
5,7
3x710
24,6
12,0
3x710
24,6
12,0
num.
W
2+6
8000
2+4
10200
2+6
13600
2+6
20400
2+8
20000
2+6
24000
2+8
30000
2+8
30000
2+10
36000
16
35
16
35
167
162
22
42
16
35
245
238
22
54
22
42
262
253
22
54
22
42
372
358
28
66
28
66
425
415
28
66
28
66
558
545
28
66
28
66
603
587
2x28
2x66
2x28
2x66
810
793
2x28
2x66
2x28
2x66
873
850
Tc: Temperatura de cmara - Room temperature t1: Salto trmico - Temperature difference
54
EVAPORADORES
SERIE MR 500
630
710
55
INSTALACIN
INSTALLATION
The MR unit coolers range is specifically designed for freezing tunnels requiring a good air distribution and an efficient use of the
available space.
Van anclados al suelo mediante patas, llevando la batera evaporadora colocada en vertical en la parte inferior y los ventiladores
en la parte superior tambin en vertical.
De esta forma, el aire entra y sale por el mismo lado, proporcionando esta disposicin las siguientes ventajas:
El aparato puede colocarse junto a la pared lo que conlleva un
importante ahorro de espacio.
Al ser la aspiracin del aire horizontal y por la parte delantera,
la circulacin y renovacin del mismo se realiza en condiciones
ptimas.
En las aplicaciones para tneles de congelacin rpida en las
que el gnero se introduce en carros con estantes de varios pisos
(por ejemplo en congelaciones de pastelera, panadera, mariscos, pescado, etc.), se asegura que el aire llegue por igual a
todos los rincones de los carros, logrndose que todo el producto se enfre de manera uniforme.
56
The advantages of installing the equipment directly onto the floor are
as follows:
Easy installation in the cold storage room, specially for large
units, since the equipment does not need to be lifted and installed in the ceiling.
Easy and fast access to the inside for cleaning and maintenance
operations thanks to the hinged fan motor panels which allow a
manual handling for opening and closing.
We may also supply wall-mounted units with construction characteristics, dimensions or capacities different than those shown in this
catalogue, specially adapted to particular needs.
EVAPORADORES
CAPACIDADES NOMINALES
ENTRE 480 Y 9120 W
NOMINAL CAPACITIES
BETWEEN 480 AND 9120 W
CARACTERSTICAS
CHARACTERISTICS
For use in medium and low temperatures for preserving frehs or frozen
goods.
The evaporating coil is built with internally grooved copper tube and
corrugated aluminium fins with 4 mm (MVP and MVG), 4,2 mm (MVM)
and 7 mm (MVB) fin spacing. Sealed circuit with pressure air inside to
assure the coil is received totally leak free.
En chapa de aluminio de elevada resistencia a la corrosin. Lleva bandeja de desage abatible en la parte inferior y bandeja intermedia bajo la
batera para facilitar el desage y posibilitar la colocacin de resistencias
para desescarche. Con soportes de acero galvanizado para su anclaje al
techo.
Made of a corrosion resistant aluminium . With hinged drip tray at the bottom and intermediate tray under the coil to allow the water drainage and
to fasten the defrosting heaters. Galvanized steel supports for anchoring
to the ceiling.
OPTIONS
OPCIONES
MV G
-85 -E
Desescarche - Defrosting E: Elctrico - Electric
GC: Gas caliente - Hot gas
N Modelo - Model Nr.
Tamao - Size
Serie modelo - Model serie
P: Pequeo - Small
G: Mediano - Medium
M: Grande sep. 4,2 mm- Large fin spacing 4,2 mm
B: Grande sep. 7 mm- Large fin spacing 7 mm
57
R-404A
PASO DE ALETAS - FIN SPACING
MODELO
MODEL
230
4 mm
MVP
22
MVP
41
MVP
63
MVP
84
MVP
100
Capacidad nominal
Nominal capacity
Tc=0C
t1=8K
480
740
1180
1480
2220
Capacidad de aplicacin
Application capacity
Tc=-18C t1=7K
370
570
910
1140
1710
Superficie / Surface
m2
1,6
2,6
3,9
5,2
7,8
dm3
0,4
0,7
0,9
1,2
1,8
m3/h
300
440
720
880
1320
kW
0,38
0,59
0,97
1,18
1,78
1x230
0,25
36
1x230
0,25
36
2x230
0,50
72
2x230
0,50
72
3x230
0,75
108
nx
A
W
num.
W
1
400
1
500
1
750
1
1000
1
1500
E
S
3/8
3/8
3/8
3/8
3/8
3/8
1/2
5/8
1/2
5/8
Kg
6,6
8,4
12
14
20
Tc: Temperatura de cmara - Room temperature t1: Salto trmico - Temperature difference
SERIE MVP
58
R-404A
MODELO
MODEL
230
4 mm
MVG
30
MVG
45
MVG
70
MVG
85
MVG
125
Capacidad nominal
Nominal capacity
Tc=0C
t1=8K
670
1000
1570
2000
3000
Capacidad de aplicacin
Application capacity
Tc=-18C t1=7K
516
770
1210
1540
2310
Superficie / Surface
m2
2,3
3,9
5,8
7,8
11,7
dm3
0,7
1,0
1,4
1,8
2,6
m3/h
410
560
950
1120
1680
kW
0,54
0,80
1,26
1,60
2,40
1x230
0,25
36
1x230
0,25
36
2x230
0,50
72
2x230
0,50
72
3x230
0,75
108
nx
A
W
num.
W
1
400
1
500
1
750
1
1000
1
1500
E
S
3/8
3/8
3/8
3/8
1/2
5/8
1/2
5/8
1/2
5/8
Kg
7,5
9,5
14
16
23
Tc: Temperatura de cmara - Room temperature t1: Salto trmico - Temperature difference
SERIE MVG
59
EVAPORADORES
R-404A
PASO DE ALETAS - FIN SPACING
MODELO
MODEL
230
4,2 mm
300
MVM
35
MVM
55
MVM
75
MVM
115
MVM
125
MVM
160
MVM
190
MVM
150
MVM
180
MVM
210
MVM
250
MVM
340
Capacidad nominal
Nominal capacity
Tc=0C t1=8K
1100
1320
2330
2760
3780
4660
5520
4400
5240
6080
7860
9120
Capacidad aplicacin
Application capacity
Tc=+10C t1=10K
Tc=-18C t1=7K
W
W
1650
847
1980
1016
3495
1794
4140
2125
5670
2911
6990
3588
8280
4250
6600
3388
7860
4035
9120
4682
11790
6052
13680
7022
Superficie / Surface
m2
5,4
8,1
11,5
17,3
19,0
23,0
34,5
17,1
22,7
34,1
34,1
51,2
dm3
1,3
1,9
2,3
3,5
3,7
4,4
6,6
3,3
4,4
6,6
6,4
9,7
m3/h
540
480
1120
990
1780
2240
1980
2760
2620
2350
3930
3525
kW
0,88
1,1
1,9
2,2
3,0
3,7
4,4
3,5
4,2
4,9
6,3
7,3
MODELO
MODEL
230
7 mm
300
MVB
35
MVB
55
MVB
75
MVB
115
MVB
125
MVB
160
MVB
190
MVB
150
MVB
180
MVB
210
MVB
250
MVB
340
Capacidad nominal
Nominal capacity
Tc=0C t1=8K
990
1230
2000
2500
3230
4000
5000
3660
4420
5520
6630
8280
Capacidad aplicacin
Application capacity
Tc=-18C t1=7K
Tc=-25C t1=6K
W
W
762
624
947
775
1540
1260
1925
1575
2487
2035
3080
2520
3850
3150
2818
2306
3403
2785
4250
3478
5105
4177
6376
5216
Superficie / Surface
m2
3,4
5,1
7,2
10,8
11,9
14,4
21,7
10,7
14,3
21,4
21,4
32,1
dm3
1,3
1,9
2,3
3,5
3,7
4,4
6,6
3,3
4,4
6,6
6,4
9,7
m3/h
600
560
1200
1120
1875
2400
2240
2900
2780
2580
4170
3870
kW
0,79
0,98
1,6
2,0
2,6
3,2
4,0
2,9
3,5
4,4
5,3
6,6
COMMON DATA
n x 1x230
A
0,25
W
36
1x230
0,25
36
2x230
0,5
72
2x230
0,5
72
3x230
0,75
108
4x230
1,0
144
4x230
1,0
144
2x300
0,64
144
2x300
0,64
144
2x300
0,64
144
3x300
0,96
216
3x300
0,96
216
2
1
3
1140
1
1
2
1700
2
1
3
2550
1
1
2
2800
1
1
2
3400
2
1
3
5100
1
1
2
2800
2
1
3
4200
3
1
4
5600
2
1
3
6300
3
1
4
8400
1/2
1/2
23
23
1/2
1/2
25
26
1/2
22
32
33
1/2
22
38
40
1/2
22
44
45
1/2
22
40
41
1/2
22
42
44
1/2
22
48
50
1/2
22
60
62
1/2
28
68
71
num.
num.
num.
W
1
1
2
760
Tc: Temperatura de cmara - Room temperature t1: Salto trmico - Temperature difference
60
EVAPORADORES
300
230
61
62
EVAPORADORES
CAPACIDADES NOMINALES
ENTRE 2,5 Y 8,6 kW
NOMINAL CAPACITIES
BETWEEN 2,5 AND 8,6 kW
CARACTERSTICAS
CHARACTERISTICS
Especialmente recomendados para instalaciones donde se precisa una conservacin de gneros delicados, como flores, quesos, carnes, frutas, vegetales, pastelera, retardo de masas, embutidos, etc. Son tambin ideales para
la climatizacin en salas de despiece y envasado incluso en laboratorios por
su funcionamiento silencioso.
The evaporating coil is built with inner grooved copper tube and corrugated aluminium fins with 4,2 mm fin spacing with high efficiency. Sealed
circuit with pressure air inside to assure the coil is received totally leak free.
OPTIONS
OPCIONES
FBV -69 -E
Desescarche - Defrosting E: Elctrico - Electric
GC: Gas caliente - Hot gas
N Modelo - Model Nr.
Serie modelo - Model serie
63
Tc: Temperatura de cmara - Room temperature t1: Salto trmico - Temperature difference.
(1) Nivel sonoro db(A) a 10m sin reflexin Sound level db(A) at 10m echo free (2) E: Entrada - Inlet S: Salida - Outlet
SERIE FBV
64
EVAPORADORES
CAPACIDADES NOMINALES
ENTRE 17,7 Y 66,8 kW
NOMINAL CAPACITIES
BETWEEN 17,7 AND 66,8 kW
CARACTERSTICAS
CHARACTERISTICS
Aeroevaporadores centrfugos para cmaras frigorficas o salas de trabajo con temperaturas positivas.
Batera en tubo de cobre de 1/2" estriado interiormente y aletas corrugadas de alta eficiencia. Se entregan con el circuito cerrado con aire a presin en el interior para comprobacin de la estanqueidad y con vlvula
de obs para conexin de manmetro. Cada ventilador va separado con
plenum independiente.
Cold manufactured with 1/2" O.D. internally grooved copper tube and
corrugated aluminium fins of high efficiency. Delivered with sealed circuit
with pressured air inside to assure the coil is received totally leak free and
with valve for manometer connection. Finned coil sections separated and
independent for each fan.
Lateral pannels easily removable that allow the access to the inside for cleaning and maintenance operation.
Lower and intermediated drip tray covering all the bottom of the evaporator for an optimal draining of the condensed water.
Centrifugal direct driven and closed fan motors three phase 230/400V 50
Hz, protection IP-44 with high available pressure allowing the possibility of
connecting long air duts.
OPCIONES
OPTIONS
FC M -950 -E
Desescarche - Defrosting E: Elctrico - Electric
GC: Gas caliente - Hot gas
N Modelo - Model Nr.
Sep. aletas - Fin spacing
M: 4,2 mm.
65
R-404A
PASO DE ALETAS - FIN SPACING
MODELO
MODEL
4,2 mm
FCM
950
FCM
1290
FCM
1780
FCM
2430
FCM
2550
FCM
3850
Capacidad nominal
Nominal capacity
Tc=0C t1=8K
100Pa
150Pa
200Pa
16840
16080
15180
25680
24400
23480
30000
28680
27000
38520
36600
35220
45000
43020
40500
62160
59680
56440
Capacidad de aplicacin
Application capacity
Tc=+10C t1=10K
100Pa
150Pa
200Pa
25260
24120
22770
38520
36600
35220
45000
43020
40500
57780
54900
52830
67500
64530
60750
93240
89520
84660
Superficie / Surface
m2
dm3
Caudal de aire
Air flow
100Pa
m3/h 150Pa
200Pa
85
108
145
163
217
306
17,3
21,1
28,1
31,0
41,3
57,5
6150
5670
5150
12200
11220
10200
11440
10540
9480
18300
16830
15300
17160
15810
14220
23540
21640
19640
2x12/12
6,6
2200
2x12/12
6,6
2200
3x12/12
9,9
3300
3x12/12
9,9
3300
4x12/12
13,2
4400
1x12/12
3,3
1100
num.
num.
num.
W
2
6
8
8000
2
4
6
10200
2
6
8
13600
2
4
6
15300
2
6
8
20400
2
6
8
28800
16
35
154
22
42
228
22
54
245
22
54
320
22
54
346
28
54
461
Tc: Temperatura de cmara - Room temperature t1: Salto trmico - Temperature difference
SERIE FC
66
EVAPORADORES
CAPACIDADES NOMINALES
ENTRE 510 Y 3690 W
NOMINAL CAPACITIES
BETWEEN 510 AND 3690 W
CARACTERSTICAS
CHARACTERISTICS
Coilt built with copper tube arranged in a staggered position and corrugated aluminium fins arranged with single spacing of 10 mm for great
efficiency. Sealed circuit with pressure air inside to assure the coil is received totally leak free.
Single circuit for models SN-20 to SN-80 and double refrigerated circuit
for the other two models SN-90 and SN-100 with multiple injection by
means of a distributor.
Drip tray incorporated, specially constructed from PVC with a section comprising a double canal at the bottom to prevent drips and condensation
from falling on to the goods stored in the cold-room, together with a large
gutter for collecting the water during desfrosting.
OPCIONES
Desescarche elctrico o por gases calientes
Batera lacada con resina de poliuretano (consultar oficina tcnica de
Frimetal)
Circuitos para agua glicolada
Aletas de aluminio pretratadas
Tubos de acero inoxidable para amoniaco otros refrigerantes.
Bandeja desage en aluminio o acero inoxidable
OPTIONS
Electric or hot gas defrosting
Coated coil with polyurethane resin (consult the technical department of
Frimetal)
Circuits for water glycol
Treated aluminium fins
Stainless steel tubes for ammonia or other refrigerants.
Aluminium or stainless steel drip tray
SN -100 -E
Desescarche - Defrosting E: Elctrico - Electric
GC: Gas caliente - Hot gas
N Modelo - Model Nr.
Serie modelo - Model serie
67
R-404A
10 mm
SN
20
SN
30
SN
40
SN
50
SN
60
SN
70
SN
80
SN
90
SN
100
510
840
1080
1510
1940
2210
2580
3230
3690
Superficie / Surface
m2
8,6
14,4
18,3
25,6
32,9
37,6
43,9
54,9
62,7
dm3
1,5
2,6
3,2
4,4
5,5
6,3
7,3
9,1
10,3
MODELO
MODEL
Capacidad nominal
Nominal capacity
Tc=+4C t1=10K
num.
Potencia / Power
Kg
600
1200
1600
2400
3000
3000
3600
4800
5600
1/2
5/8
1/2
5/8
1/2
5/8
1/2
5/8
1/2
5/8
1/2
5/8
1/2
5/8
1/2
22
1/2
22
12
18
22
30
36
42
48
54
60
Tc: Temperatura de cmara - Room temperature t1: Salto trmico - Temperature difference
SERIE SN
68
EVAPORADORES
SERIE SN
69
ENSAMBLAJE SN -
70
SN ASSEMBLY
EVAPORADORES
CAPACIDADES NOMINALES
ENTRE 2200 Y 6900 W
NOMINAL CAPACITIES
BETWEEN 2200 AND 6900 W
CARACTERSTICAS
CHARACTERISTICS
Coilt built with copper tube arranged in a staggered position and corrugated aluminium fins arranged with single spacing of 10 mm for great
efficiency. Sealed circuit with pressure air inside to assure the coil is received totally leak free.
The gravity EG evaporators range is the only on the market that does not
need to be assembled during the installation process, since all the components, exchanging coil, drip tray, gutter and supporting to the ceiling come
already assembled from workshop, making the installation fast and simple.
Drip tray incorporated, specially constructed from PVC with a section comprising a double canal at the bottom to prevent drips and condensation
from falling on to the goods stored in the cold-room, together with a large
gutter for collecting the water during desfrosting.
OPCIONES
OPTIONS
EG -75 -E
Desescarche - Defrosting E: Elctrico - Electric
GC: Gas caliente - Hot gas
N Modelo - Model Nr.
Serie modelo - Model serie
71
R-404A
10 mm
EG
38
EG
44
EG
55
EG
63
EG
75
EG
94
2210
2580
3230
3690
4420
5530
6910
Superficie / Surface
m2
37,6
43,9
54,9
62,7
75,2
94,1
118
dm3
6,3
7,3
9,1
10,3
12,3
15,2
19,0
MODELO
MODEL
Capacidad nominal
Nominal capacity
Tc=+4C t1=10K
EG
118
num.
Potencia / Power
Kg
3000
3600
4800
5600
7000
8250
9900
1/2
16
1/2
16
1/2
22
1/2
22
1/2
22
1/2
22
1/2
22
45
52
62
70
82
101
124
Tc: Temperatura de cmara - Room temperature t1: Salto trmico - Temperature difference
SERIE EG
72
EVAPORADORES
SERIE EG
73
COLOCACIN EN EL TECHO
FIXATION TO THE CEILING
74
SELECCIN RPIDA SN / EG
FAST SELECTION SN / EG
EG
EVAPORADORES
SN
75
SELECCIN EVAPORADORES SN / EG
EVAPORATOR SELECTION SN / EG
GR
Fr
EJEMPLO DE SELECCION
Q = 3100 W
Tc = 0C
t 1 = 9
R-404A
76
Fr
GR
R-404A = 1
Fc = 0,85
- SELECTION EXAMPLE
Qn =
Q
Fc x Fr
3100 W
0,85 x 1
= 3650 W
SN - 100
EG - 63
EVAPORADORES
CAPACIDADES NOMINALES
ENTRE 35 Y 168 kW
NOMINAL CAPACITIES
BETWEEN 35 AND 168 kW
APLICACIONES
APPLICATIONS
OPCIONES
OPTIONS
77
NH 3
PASO DE ALETAS - FIN SPACING
MODELO
800
GNHM GNHM GNHM GNHM GNHM GNHM GNHM GNHM GNHM GNHM GNHM
2450 2600 3900 4600 4900 5500 6300 7500 4750 6350 7400
MODEL
Capacidad nominal
Nominal capacity
630
4,2 mm
Tc=0C t1=8K
GNHM
8500
50000
56000
168400
75000
38500
84000 112500 126000 150000 168000 187500 210000 137100 187200 197100
43120 57750 64680 77000 86240 96250 107800 70380 96100 101180
252600
129670
75000
Superficie / Surface
m2
259
346
389
518
518
690
647
863
621
828
1035
1294
m3/h 25500
24140
38250
36210
51000
48280
63750
60350
34600
48300
46050
59200
32
34
33
35
34
36
35
28
29
29
30
33
MODELO
630
6 mm
800
GNHB GNHB GNHB GNHB GNHB GNHB GNHB GNHB GNHB GNHB GNHB
1740 2300 3300 3850 4650 5200 5400 6500 4000 5450 6450
GNHB
8100
46300
53200
162400
69450
35650
79800 104180 119700 138900 159600 173630 199500 127800 176850 191250
40960 53480 61450 71300 81930 89130 102410 65600 90780 98180
243600
125050
MODEL
Capacidad nominal
Nominal capacity
Tc=0C t1=8K
Superficie / Surface
m2
m3/h
69450
79800
187
249
280
373
373
497
466
622
447
596
745
932
27080
25840
40620
38760
54160
51680
67700
64600
36900
51900
49650
63600
34
33
35
34
36
35
37
36
29
30
30
31
COMMON DATA
Ventiladores / Fans
Consumo / Consumption
Potencia absorbida / Power input
Volumen interior / Circuit Volume
nx
A
W
dm3
2x630
6,4
3800
54
2x630
6,4
3800
72
3x630
9,6
5700
80
3x630
9,6
5700
107
4x630
12,8
7600
106
4x630
12,8
7600
141
5x630
16,0
9500
132
5x630
16,0
9500
176
2x800
7,8
3600
128
3x800
11,7
5400
170
3x800
11,7
5400
213
4x800
15,6
7200
265
num.
4+7
W
17600
4+10
24200
4+7
26400
4+10
36300
4+7
35200
4+10
48400
4+7
44000
4+10
60500
4+10
36300
4+10
48400
4+13
61600
4+13
77000
Reducido E0 / Reduced E0
Bandeja + Bateria / Drip tray + Coil
Potencia / Power
num.
4+4
W
11000
4+5
13200
4+4
16500
4+5
19800
4+4
22000
4+5
26400
4+4
27500
4+5
33000
4+5
19800
4+5
26400
4+7
35200
4+7
44000
8000
30
2x1
9000
20
3x1
12000
30
3x1
12000
20
4x1
16000
30
4x1
15000
20
5x1
20000
30
5x1
12000
30
2x1
16000
30
3x1
20000
30
3x1
25000
30
4x1
42,4
60,3
350
335
42,4
60,3
441
425
60,3
73,0
504
482
60,3
73,0
575
553
60,3
73,0
659
628
2x42,4
2x60,3
708
681
2x42,4
2x60,3
813
775
60,3
73,0
582
551
2x42,4
2x60,3
772
730
2x42,4
2x60,3
873
819
2x60,3
2x73,0
1088
1021
6000
20
2x1
Tc: Temperatura de cmara - Room temperature t1: Salto trmico - Temperature difference
78
NH 3
800
GNHL GNHL GNHL GNHL GNHL GNHL GNHL GNHL GNHL GNHL GNHL
1600 1830 2600 3450 4100 5000 5150 6000 3600 5350 6050
GNHL
7700
39600
47200
59400
70800
79200
94400
99000 118000
150400
Tc=-18C t1=7K
Capacidades aplicacin
Tc=-25C t1=6K
Application capacities
Tc=-40C t1=5K
W
W
W
30490
24950
20200
36340
29740
24070
45740
37420
30290
54520
44600
36110
60980
49900
40390
72690
59470
48140
76230
62370
50490
90860
74340
60180
58520
47880
38760
81770
66910
54160
91010
74470
60280
115810
94750
76700
Superficie / Surface
m2
129
172
193
258
258
343
322
429
309
412
514
643
m3/h
28760
27640
43140
41460
57520
55280
71900
69100
39400
55650
53700
69000
35
34
36
35
37
36
38
37
29
30
30
31
MODEL
Capacidad nominal
Nominal capacity
Tc=0C t1=8K
MODELO
630
12 mm
800
GNHX GNHX GNHX GNHX GNHX GNHX GNHX GNHX GNHX GNHX GNHX
1550 1790 2350 2950 3350 4550 4700 5800 3000 5100 5850
GNHX
7250
35100
42600
52650
63900
70200
85200
87750 106500
69400
96900 109500
139600
Tc=-18C t1=7K
Capacidades aplicacin
Tc=-25C t1=6K
Application capacities
Tc=-40C t1=5K
W
W
W
27030
22110
17900
32800
26840
21730
40540
33170
26850
49200
40260
32590
54050
44230
35800
65600
53680
43450
67570
55280
44750
82010
67100
54320
53440
43720
35390
74610
61050
49420
84320
68990
55850
107490
87950
71200
Superficie / Surface
m2
100
134
150
200
200
267
250
333
239
319
399
499
m3/h
29840
28800
44760
43200
59680
57600
74600
72000
40900
58350
56400
72600
36
35
37
36
38
37
39
38
30
31
31
32
MODEL
Capacidad nominal
Nominal capacity
Tc=0C t1=8K
COMMON DATA
Ventiladores / Fans
Consumo / Consumption
Potencia absorbida / Power input
Volumen interior / Circuit Volume
nx
A
W
dm3
2x630
6,4
3800
54
2x630
6,4
3800
72
3x630
9,6
5700
80
3x630
9,6
5700
107
4x630
12,8
7600
106
4x630
12,8
7600
141
5x630
16,0
9500
132
5x630
16,0
9500
176
2x800
7,8
3600
128
3x800
11,7
5400
170
3x800
11,7
5400
213
4x800
15,6
7200
265
num.
4+7
W
17600
4+10
24200
4+7
26400
4+10
36300
4+7
35200
4+10
48400
4+7
44000
4+10
60500
4+10
36300
4+10
48400
4+13
61600
4+13
77000
Reducido E0 / Reduced E0
Bandeja + Bateria / Drip tray + Coil
Potencia / Power
num.
4+4
W
11000
4+5
13200
4+4
16500
4+5
19800
4+4
22000
4+5
26400
4+4
27500
4+5
33000
4+5
19800
4+5
26400
4+7
35200
4+7
44000
8000
30
2x1
9000
20
3x1
12000
30
3x1
12000
20
4x1
16000
30
4x1
15000
20
5x1
20000
30
5x1
12000
30
2x1
16000
30
3x1
20000
30
3x1
25000
30
4x1
42,4
60,3
323
313
42,4
60,3
411
400
60,3
73,0
463
448
60,3
73,0
535
520
60,3
73,0
604
584
2x42,4
2x60,3
658
639
2x42,4
2x60,3
744
719
60,3
73,0
528
510
2x42,4
2x60,3
700
677
2x42,4
2x60,3
782
752
2x60,3
2x73,0
974
937
6000
20
2x1
Tc: Temperatura de cmara - Room temperature t1: Salto trmico - Temperature difference
79
EVAPORADORES
MODELO
630
9 mm
80
EVAPORADORES
CAPACIDADES NOMINALES
ENTRE 33,4 Y 163 kW
NOMINAL CAPACITIES
BETWEEN 33,4 AND 163 kW
APLICACIONES
APPLICATIONS
Dual air discharge evaporators for ammonia designed for use in fast cooling
tunnels for fruit and vegetables or for freezing tunnels where high air pressure is required, together with perfect air distribution through the product
located on the pallets.
Batera construida con tubo de acero inoxidable AISI 304L 316L, expansionada a las aletas de aluminio corrugado proporcionando una elevada eficacia. La soldadura se realiza mediante un sistema automtico con patente
europea del tipo TIG orbital pulsante, en cmara de atmsfera inerte de
gas argn obtenindose un circuito totalmente estanco y a prueba de fugas.
Carcasa exterior en chapa de aluminio y galvanizada lacada en resina
poliester blanco RAL-9002.
Ventiladores helicoidales trifsicos a 400V/50Hz con dos opciones:
630 mm de rotor externo, proteccin IP-54 y protector trmico (termocontacto).
710 mm tubulares de elevada presin y caudal con proteccin IP-55.
OPCIONES
Desescarches: elctrico, por agua y gases calientes.
Tratamientos anticorrosin: aletas pretratadas, aletas de cobre, batera
lacada con resina de poliuretano (consultar oficina tcnica de Frimetal).
Bandeja desage con aislamiento anticondensacin.
Resistencias circulares para los ventiladores.
Circuitos para agua u otros lquidos.
Para uso de refrigerante CO2 hasta presin de 50 bar (consultar oficina
tcnica).
Se pueden fabricar evaporadores con caractersticas especiales ajustadas a
las medidas del tnel.
OPTIONS
Defrosting: electric, by water and hot gas.
Corrosion protections: pretreated fins, copper fins, coated coil with polyurethane resin (consult the technical department of Frimetal).
Anti condensation insulated drip tray.
Round electric heaters for fan ducts.
Circuits for water or other liquids.
For refrigerant CO2 up to 50 bar presure (consult our technical department).
Special custom-made evaporators adapted to the dimensions of the tunnel
can also be manufactured on request.
TNH X -2900 -E
E: Elctrico - Electric
Desescarche - Defrosting E+: Elctrico de alta eficiencia - Electric of high efficiency
A: Por agua - By water
N Modelo - Model Nr.
GC: Gas caliente - Hot gas
M: 4,2 mm.
Sep. aletas - Fin spacing B: 7 mm.
L: 9 mm.
Serie modelo - Model serie
X: 12 mm.
81
NH 3
PASO DE ALETAS - FIN SPACING
MODELO
Capacidad nominal / Nominal capacity
0 Pa
W
51900
65600
77850
98400
131200
62000
81550
93000 122325
163100
Tc=-18C t1=7K
40000
50500
59900
75800
101000
47700
62800
71600
92400
125600
m3/h
32200
31300
48300
46950
62600
45700
43800
68550
65700
87600
150
Pa(1)
250
Pa(1)
Tc=0C t1=8K
44550
53600
66825
80400
107200
52450
64550
78675
96825
129100
Tc=-18C t1=7K
34330
41300
51500
61900
82500
40400
49700
60600
74600
94400
m3/h
24700
23900
37050
35850
47800
32800
30600
49200
45900
61200
267
400
400
600
800
267
400
400
600
800
Superficie / Surface
m2
MODELO
MODEL
630
7 mm
TNHB
1650
TNHB
2350
TNHB
2800
710
TNHB
3800
TNHB
5250
TNHB TNHB
2100 3100
TNHB
3350
TNHB
4800
TNHB
6100
0 Pa
0 Pa
Tc=0C t1=8K
710
TNHM TNHM TNHM TNHM TNHM TNHM TNHM TNHM TNHM TNHM
2440 3000 3700 4700 6000 2550 3850 4400 5200 7600
MODEL
Capacidad de aplicacin
Application capacity
Caudal aire / Air flow
630
4,2 mm
0 Pa
Tc=0C t1=8K
43000
54950
64500
82425
109900
51950
68950
77925 103425
137900
Tc=-18C t1=7K
Tc=-25C t1=6K
W
W
m3/h
33100
27100
42300
34600
49700
40600
63500
51900
84600
69200
40000
32700
53100
43400
60000
49100
79600
65200
106200
86900
33500
32500
50250
48750
65000
48200
46000
72300
69000
92000
150 Pa(1)
250 Pa(1)
Tc=0C t1=8K
36750
47400
55125
71100
94800
44250
55550
66375
83325
111100
Tc=-18C t1=7K
Tc=-25C t1=6K
W
W
28300
23200
36500
29900
42400
34700
54700
44800
73000
59700
34100
27900
42800
35000
51100
41800
64200
52500
85500
70000
m3/h
25500
25100
38250
37650
50200
35300
33200
52950
49800
66400
Superficie / Surface
m2
166
248
248
373
497
166
248
248
373
497
Capacidad de aplicacin
Application capacity
COMMON DATA
MOTOVENTILADORES / FAN MOTORS
400V / 3 / 50Hz 1.300 r.p.m.
Consumo / Consumption
Potencia absorbida / Power input
2x630
7,2
4,2
2x630
7,2
4,2
3x630
10,8
6,3
3x630
10,8
6,3
4x630
14,4
8,4
2x710
16,4
8
2x710
16,4
8
3x710
24,6
12
3x710
24,6
12
4x710
32,8
16
num.
W
6+2
16000
10+2
24000
6+2
24000
10+2
36000
10+2
48000
6+2
16000
10+2
24000
6+2
24000
10+2
36000
10+2
48000
7000
20
4x3/4
53
10000
30
4x3/4
79
10500
20
6x3/4
78
15000
30
6x3/4
117
20000
30
8x3/4
154
7000
20
4x3/4
53
10000
30
4x3/4
79
10500
20
6x3/4
78
15000
30
6x3/4
117
20000
30
8x3/4
154
2x42,4
2x60,3
354
340
2x42,4
2x60,3
438
425
2x42,4
2x60,3
500
480
2x42,4
2x60,3
650
622
2x42,4
2x60,3
405
395
2x42,4
2x60,3
445
433
2x42,4
2x60,3
576
563
2x42,4
2x60,3
640
620
2x60,3
2x73,0
830
805
nx
A
kW
(1) Prdida de carga del aire en la cmara / Air drop pressure in the room Tc: Temperatura de cmara - Room temperature t1: Salto trmico - Temperature difference
82
NH 3
MODEL
TNHL
1500
TNHL
2150
TNHL
2500
TNHL
2650
TNHL
2850
TNHL
4200
TNHL
5800
0 Pa
37950
50150
56925
75225
100300
45950
60100
68925
90150
120200
Tc=-25C t1=6K
Tc=-40C t1=5K
W
W
m3/h
23900
19000
31600
25100
35900
28500
47400
37600
63200
50200
28900
23000
37900
30100
43400
34500
56800
45100
75700
60100
34000
33200
51000
49800
66400
49000
47500
73500
71250
95000
150
Pa(1)
250
Pa(1)
Tc=0C t1=8K
32450
43050
48675
64575
86100
39550
51500
59325
77250
103000
Tc=-25C t1=6K
Tc=-40C t1=5K
W
W
m3/h
20400
16200
27100
21500
30700
24300
40700
32300
54200
43100
24900
19800
32400
25800
37400
29700
48700
38600
64900
51500
25900
25400
38850
38100
50800
36700
34900
55050
52350
69800
132
198
198
297
396
132
198
198
297
396
m2
MODELO
630
12 mm
MODEL
710
TNHX TNHX
1600 2200
TNHX TNHX
2450 3400
0 Pa
TNHX
5300
0 Pa
Tc=0C t1=8K
33350
45350
50025
68025
90700
40800
55000
61200
82500
110000
Tc=-25C t1=6K
Tc=-40C t1=5K
W
W
m3/h
21000
16700
28600
22700
31500
25000
42900
34000
57100
45400
25700
20400
34700
27500
38600
30600
52000
41300
69300
55000
34200
33500
51300
50250
67000
49600
48600
74400
72900
97200
150 Pa(1)
TNHL
1700
Superficie / Surface
Capacidad de aplicacin
Application capacity
Caudal aire / Air flow
TNHL
5050
Tc=0C t1=8K
TNHL
3600
0 Pa
710
250 Pa(1)
Tc=0C t1=8K
28450
37150
42675
55725
74300
35100
47150
52650
70725
94300
Tc=-25C t1=6K
Tc=-40C t1=5K
W
W
m3/h
19100
14200
23400
18600
36900
21300
35100
27900
46800
37200
22100
17600
29700
23600
33200
26300
44600
35400
59400
47200
26000
25500
39000
38250
51000
37400
36000
56100
54000
72000
103
154
154
231
308
103
154
154
231
308
Superficie / Surface
m2
COMMON DATA
MOTOVENTILADORES / FAN MOTORS
400V / 3 / 50Hz 1.300 r.p.m.
Consumo / Consumption
Potencia absorbida / Power input
2x630
7,2
4,2
2x630
7,2
4,2
3x630
10,8
6,3
3x630
10,8
6,3
4x630
14,4
8,4
2x710
16,4
8
2x710
16,4
8
3x710
24,6
12
3x710
24,6
12
4x710
32,8
16
num.
W
6+2
16000
10+2
24000
6+2
24000
10+2
36000
10+2
48000
6+2
16000
10+2
24000
6+2
24000
10+2
36000
10+2
48000
7000
20
4x3/4
53
10000
30
4x3/4
79
10500
20
6x3/4
78
15000
30
6x3/4
117
20000
30
8x3/4
154
7000
20
4x3/4
53
10000
30
4x3/4
79
10500
20
6x3/4
78
15000
30
6x3/4
117
20000
30
8x3/4
154
2x42,4
2x60,3
333
345
2x42,4
2x60,3
417
428
2x42,4
2x60,3
470
485
2x42,4
2x60,3
605
627
2x42,4
2x60,3
390
397
2x42,4
2x60,3
425
435
2x42,4
2x60,3
555
565
2x42,4
2x60,3
610
625
2x60,3
2x73,0
790
810
nx
A
kW
(1) Prdida de carga del aire en la cmara / Air drop pressure in the room Tc: Temperatura de cmara - Room temperature t1: Salto trmico - Temperature difference
83
EVAPORADORES
MODELO
630
9 mm
84
EVAPORADORES
85
INSTALACIN
INSTALLATION
The included drawing shows the most usual arrangement for this type
of tunnel in which the evaporator(s) is located in the centre of the roof
and occupies the entire length of the tunnel. The pallets holding the
product are located lengthways on both sides, separated by a central
space for suction by the fans. In order to force the air through a closed circuit and the pallets, the space remaining between the upper
part of the pallets and the evaporator is covered with tarpaulin or
other system. For the same reason, it is necessary to close off the tunnel ends as much as possible.
86
EVAPORADORES
INTRODUCCIN
FOREWORD
CHARACTERISTICS OF CO2
The two main characteristics that differentiate CO2 from the rest of
refrigerants and at the same time set up limits and determines its
range of use are a high saturation pressure in all temperature ranges
and a low critical temperature of only 31,1 C.
The high saturation pressure determines, in the case of an evaporator,
the type of tubing material with which the coil must be built in order to
assure a sufficient strength due to the pressures involved. Further on
in this chapter there is information about the options of FRIMETAL
according to the working temperatures.
At temperatures over the critical point of 31,1C the CO2 is always in
gas phase, being impossible to make it liquid no matter how much it
is compressed.
CICLO TRANSCRTICO
Esto trae como consecuencia que en un ciclo frigorfico normal, en la
zona de alta presin el CO2 tenga que trabajar en rgimen transcrtico, es decir, por encima de la temperatura crtica y que en lugar de
un condensador se tenga que utilizar un enfriador de gas que debe
estar preparado para soportar presiones de ms de 100bar.
TRANSCRITICAL CYCLE
Since the critical point is so low, in a standard refrigerant cycle CO2
has to work in the transcritical zone in the high pressure side. For this
reason, instead of a classic condenser it is necessary to install a gas
cooler that must be designed to stand pressures well over 100bar.
87
EVAPORADORES DE CO2
CO2 EVAPORATORS
GRFICO 1
GRAPHIC 1
En el ejemplo se ve que la presin vara entre los 90 bar del enfriador de gas y los 20bar del evaporador, que trabaja a -20C.
Actualmente este sistema se empieza a utilizar en el campo del aire
acondicionado mvil (automviles, autobuses, etc,) y en bombas
de calor para calentamiento de agua, ya que el rgimen transcrtico permite elevar la temperatura del agua mucho ms que con
los HFC, lo cual le hace muy vlido para estas aplicaciones.
En el caso de la refrigeracin, las dificultades prcticas de trabajar
con este sistema hacen que el ciclo transcrtico se utilice solamente
en algunas aplicaciones comerciales. En la refrigeracin industrial
su uso hasta ahora est limitado a instalaciones de tipo experimental.
El CO2 se utiliza principalmente en sistemas de refrigeracin no
transcrticos, bien en cascada o como refrigerante secundario,
cuando se necesitan temperaturas finales en la cmara muy bajas.
A continuacin se explican brevemente ambos sistemas.
In the plotted cycle the pressure changes from 90bar in the gas cooler
to 20bar in the evaporator at a temperature of -20C.
Currently this transcritical system is being used in the field of mobile
air-conditioning (cars, buses, trucks) and also in heat pumps for
water heating because the transcritical system allows water heating at
temperatures far higher than with the HFCs, which makes CO2 very
suitable for this application.
In the case of the refrigeration market, the difficulties and drawbacks
of working with this system is the reason why until now the transcritical cycle of CO2 has had its use limited to experimental installations.
CO2 is thus being used mainly in subcritical cycle refrigeration, in cascade systems or as secondary coolant and for applications in which a
very low final room temperature is required. Both systems are briefly
explained below.
En cascada
Cascade
88
EVAPORADORES DE CO2
CO2 EVAPORATORS
GRAPHIC 2
EVAPORADORES
GRFICO 2
Las presiones de trabajo son por lgica muy inferiores al del ciclo
transcrtico del ejemplo anterior, variando entre los 20 bar de alta
y los 10bar a baja temperatura en el evaporador.
Now the working pressures are much lower than before in the transcritical cycle example, changing between 20bar in the high pressure
side and 10bar at low temperature in the evaporator.
EVAPORADORES DE CO2
CO2 EVAPORATORS
89
EVAPORADORES DE CO2
CO2 EVAPORATORS
La lnea de presin de saturacin del CO2 dibujada est incrementada el 20% sobre la presin real con el fin de tener un margen de
seguridad adecuado.
The saturated CO2 pressure line plotted has been increased +20%
over the real saturated pressure line in order to have a proper working
safety margin.
Al ser las propiedades del CO2 muy diferentes al resto de refrigerantes, es necesario un clculo y diseo especfico de los elementos que
componen la instalacin de fro.
As the saturated properties for CO2 are very different from the rest of
refrigerants, it is necessary to make a specific calculation and design
of all the cooling installation elements.
90
R-404A
6,98
196,4
1371
NH3
0,64
1389
889
CO2
26,1
320,7
8370
R-404A
15,4
182,2
2806
NH3
1,60
1329
2126
CO2
51,7
282,5
14605
CO2 EVAPORATORS
El CO2 tiene una densidad en fase gas muy superior al de los refrigerantes utilizados habitualmente a bajas temperaturas como son el
R-404A o el amoniaco lo que supone una elevada capacidad volumtrica (kJ/m3). Por lo tanto para una misma potencia frigorfica una
instalacin con CO2 requiere mucho menor volumen de refrigerante
y tuberas de menor dimetro.
Por lo que se refiere al evaporador, consecuencia de lo anterior el
CO2 requiere menos circuitos en la batera y en general su rendimiento es mejor con geometras de tubos compactas y tubos de poco
dimetro.
Si el diseo de los circuitos est bien calculado para las condiciones
de trabajo del CO2, el coeficiente de transmisin interior entre el refrigerante y el tubo en el evaporador es muy elevado de tal manera que
una mejora de este coeficiente apenas tendr efecto en la capacidad
final del evaporador.
Por ello con este refrigerante no se aconseja la utilizacin de tubo
estriado, ya que su uso no aporta ventajas significativas aunque
aumente el coeficiente de intercambio.
En el grfico 3 expuesta a continuacin se establece una comparativa
aproximada entre el rendimiento para evaporacin en expansin
directa entre los refrigerantes R-404A, amoniaco y CO2.
The CO2 has a very high gas-phase density compared to the refrigerants that are currently used for low temperatures such as R-404A and
ammonia, which means a great Volumetric Capacity (KJ/m3).
Therefore, with equivalent refrigerating capacity, an installation using
CO2 requires much less refrigerant volume and piping of smaller diameters.
With regard to the evaporator, it is indicated from the stated properties
that CO2 evaporators need a lower number of circuits in the coil and
generally speaking the efficiency is higher with compact tube pitches
and small diameter tubes.
If the number of circuits is properly calculated for the given working
conditions with CO2, the internal heat ex-change coefficient between
the refrigerant and the tube in the evaporator is very high. Further
improvement of this coefficient will not have any significant effect in
the final capacity of the evaporator.
For this reason, it is not advisable to use internally grooved tube, since
it does not bring any noticeable advantages even if it increases the
exchanging coefficient.
Graphic 3 shown below establishes an estimate comparison between
the efficiency for evaporation in direct expansion between refrigerants
R-404A, ammonia and CO2.
GRFICO 3
GRAPHIC 3
Para el caso del R-404A se consideran las opciones de tubo liso (que
se toma como valor 100 de referencia en cada caso) o estriado. Para
el amoniaco y CO2, los rendimientos corresponden a tubo liso.
Esta comparativa es para un mismo evaporador con idntica geometra de tubo, parmetros constructivos y materiales iguales, con la
nica diferencia de que en cada caso el nmero de circuitos est optimizado para las caractersticas del refrigerante.
A temperaturas medias-altas el R-404A con tubo estriado, amoniaco
y CO2 tienen un rendimiento parecido y del orden del 15 al 19%
superior al del R-404A con tubo liso. A medida que se tienen menores
temperaturas, el CO2 incrementa su ventaja sobre el los otros refrigerantes.
Estas curvas son una aproximacin general y puede haber variaciones en funcin de la geometra de la batera, la separacin de aletas,
la velocidad de paso del aire por la batera, etc.
In the case of refrigerant R-404A there are two options. The first is with
smooth tube (which is taken as a reference value of 100) and the
second is the performance with internally grooved tube. For ammonia
and CO2, the curves are for smooth tubes.
This comparison relates to the same evaporator with identical tube
pitch and equal construction parameters and materials with the only
difference being that in each case the number of circuits is optimized
for the corresponding refrigerant.
At medium-high temperatures R-404A with internally grooved tube,
ammonia and CO2 provide a similar capacity that is between 15/19%
higher than the same evaporator with R-404A and smooth tube. For
lower temperatures, the CO2 increases its advantage over the other
refrigerants.
These curves must be considered as an average estimate. There can
be variations depending on the tube pitch, fin spacing, air speed passing through the coil, etc.
Con lo que se ha explicado anteriormente se puede calcular y seleccionar con cierta aproximacin un evaporador para CO2 a partir de
los catlogos de los modelos estndar fabricados por FRIMETAL.
No obstante, aconsejamos que para una seleccin definitiva se pongan en contacto con nuestro Departamento Tcnico para hacer los
clculos exactos y definir un modelo totalmente adaptado a sus necesidades.
With what it has been explained in this chapter, it is possible to calculate to a certain extend and select an evaporator for CO2 from the
standard FRIMETAL models of this catalogue.
Nevertheless, for a definitive selection we advise you to contact our
Technical Department to make the accurate calculations and select a
model totally adapted to your requirements.
91
EVAPORADORES
EVAPORADORES DE CO2
EVAPORADORES DE CO2
CO2 EVAPORATORS
CO2 DIAGRAM
POSIBILIDADES CONSTRUCTIVAS
Segn presin de trabajo y temperatura de evaporacin se fabrican
las bateras con dos tipos de tubos:
MANUFACTURING POSSIBILITIES
According to the working pressure and evaporation temperature, the
coils can be manufactured with two types of tubes:
Tubo de cobre
Presin de trabajo mxima de 25 bar
Temperatura de evaporacin de -45C a -18C
Copper tubes
Maximum working pressure of 25 bar
Evaporation temperature from -45C to -18C
work with CO2, for both direct expansion DX and pumped refrigerant systems.
Circuits design and tube pitch optimized for a maximum efficiency
of the heat exchanging coil.
Possibility of manufacturing exchanging coils, evaporators and special equipment adapted to your requirements.
92
nuestro
CONDENSERS
CARACTERSTICAS GENERALES
GENERAL CHARACTERISTICS
OPCIONES
OPTIONS
CLCULO DE LA CAPACIDAD
CAPACITY CALCULATION
Nomenclatura utilizada
Qn
Capacidad Nominal del condensador
Qf
Capacidad frigorfica de la instalacin
Tev
Temperatura de evaporacin C
Tc
Temperatura de condensacin C
Tam
Temperatura del aire en el ambiente C
t
Salto trmico (Tc-Tam)
Fc
Factor calor de compresin
Fr
Factor del refrigerante
Fa
Factor de altitud
Word list
Qn
Qf
Tev
Tc
Tam
t
Fc
Fr
Fa
95
CONDENSADORES
CONDENSADORES
CONDENSADORES
CONDENSERS
Capacidad de Aplicacin
Es la capacidad del condensador para condiciones ambientales
estndar. En los catlogos se da la capacidad de aplicacin para
zonas fras o templadas (salto trmico t =10K) y para zonas clidas (salto trmico t = 7K).
Application Capacity
It is the capacity of the condenser for standard environmental conditions. The Application Capacities for cool or warm environments
(temperature difference t =10K) and for hot environments (temperature difference t = 7K) is explained in the catalogues.
SELECCIN DE UN CONDENSADOR
SELECTION OF A CONDENSER
A partir de las temperaturas de evaporacin Tev y de condensacin Tc, entrando en el grfico siguiente se calcula el Factor del
calor de compresin Fc.
Altitud - Altitude m.
400
800
1200
1600
2000
2400
Fa
1,03
1,06
1,09
1,12
1,16
1,20
Refrigerante - Refrigerant
Fr
96
R-404A
R-22
R-134a
1,04
1,07
CONDENSADORES
CONDENSERS
Qn = Qf x 15 x Fc x Fr x Fa
t
Qn = Qf x 15 x Fc x Fr x Fa
t
Entrando en la tabla de datos del condensador de la gama elegida, se selecciona el modelo que tenga la Capacidad Nominal que
ms se aproxime por arriba a Qn y que cumpla con las condiciones requeridas de nivel sonoro y consumo elctrico.
En el sitio Web www.frimetal.es hay disponible un programa de
descarga libre que permite la seleccin rpida de un condensador
de cualquier gama de las fabricadas por FRIMETAL.
1. Factores de correccin
Correction factors
2. Capacidad Nominal
Nominal Capacity
CONDICIONES DE TRABAJO
WORKING CONDITIONS
Qf = 72 kW
Tev = -20C
Tc = +45C
t = 8 K
Refrigerante - Refrigerant: R-404A
Altitud - Altitude = 800 m.
CONDENSADORES
Fc = 1,55
Fr = 1
Fa = 1,06
Tev, Tc
R-404A
800 m
3. Seleccin de catlogo
Catalogue selection
GAMA - RANGE
CB
GAMA - RANGE
VC
MODELO
MODEL
Qn
kW
db(A)
10 m
MODELO
MODEL
Qn
kW
db(A)
10 m
CBN-247
CBN-274Y
CBS-243
CBS-324Y
247
222
220
222
54
48
44
39
VCN-231
VCN-276Y
VCS-262
VCS-325Y
231
229
230
221
53
48
44
39
97
CONDENSADORES
CONDENSERS
NIVEL SONORO
SOUND LEVEL
GR-1
GR-1
GR-2
EJEMPLO - EXAMPLE
dB(A)?
2 x CBN-274
a 20 m.
CATALOGO
CBN-274
=> 48 dB(A)
dB(A)
48 - 6 + 3 = 45
20 m => -6dB(A)
GR-1
The electrical consumption and power input data of the fan motors
shown on the catalogue refer to an ambient temperature of
+20C. It is necessary to have in mind that at low temperatures
both the consumption and power input increase about a 16% for
air temperatures of -20C and a 25% for temperatures of -40C.
This must be taken into account by the installer at the moment of
calculating the elements of the electric panel of he cold installation.
98
CAPACIDADES NOMINALES
ENTRE 11 Y 638 kW
CARACTERSTICAS
CHARACTERISTICS
Air cooled condensers with axial fans of 500, 630 and 800 mm.
Serie CBN (Normal)
Connection :1.300 rpm (900 rpm models with 800)
Connection :1.000 rpm (680 rpm models with 800)
Serie CBS (Silent)
Connection : 680 rpm (450 rpm models with 800)
Connection : 550 rpm (350 rpm models wtih 800)
Coil built with a combination of copper tube and aluminium fins specially
designed for condensation that provides an optimized coefficient of heat
exchange. The fin spacing is 2,1 mm.
Supported to the casing by means of a "floating" system that avoids any
kind of contact between the copper tubes and the supporting end plates,
assuring a long life for the condenser without leaks. Finned coil sections
separated and independent for each fan.
Casing made of galvanized steel painted in a corrosion resistant white
polyester RAL-9002.
External rotor axial fans, three phase motors 400V 50Hz two speed.
Protection IP-54 and with thermal protection (Thermocontact).
OPCIONES
OPTIONS
White painted legs for anchoring to the floor in horizontal position
Complete package of wood and cardboard.
Fans wired to a external junction box.
Multicircuits for service to various compressors.
Circuits for water or oil (see series AL)
Stainless steel tubes
Copper or pretreated fins
Coated coil with polyurethane resin (consult the technical department of
Frimetal).
Electronically conmutated EC fan motors
CB N -506 H
Conexin - Connection : Tringulo - Delta
Y: Estrella - Star
Posicin - Position
N Modelo - Model Nr.
V: Vertical - Vertical
H: Horizontal - Horizontal
99
CONDENSADORES
NOMINAL CAPACITIES
BETWEEN 11 AND 638 kW
R-404A
500
MODELO
MODEL
CBN
22
CBN
25
CBN
29
CBN
45
CBN
51
CBN
57
CBN
67
CBN
76
CBN
86
22,3
25,4
28,5
44,6
50,8
57,0
66,9
76,2
85,5
17,6
14,9
19,4
16,9
20,8
19,0
35,2
29,7
38,8
33,9
41,6
38,0
52,8
44,6
58,2
50,8
62,4
57,0
t 15K (1)
kW
t 10K (2)
kW
t 7K (3)
Caudal de aire
Air flow
Nivel sonoro
Sound level
Ventiladores/Fans
400V/3/50 Hz
Superficie / Surface
Volumen interno / Circuit volume
Conexiones
Connections
Peso / Weight
kW
m3/h
dB(A)
n x mm
m2
dm3
I (mm)
O (mm)
Kg
11,7
12,9
13,9
23,5
25,9
27,7
35,2
38,8
41,6
10,4
11,9
13,3
20,8
23,7
26,6
31,2
35,6
39,5
8,2
6950
9,1
6700
9,7
6300
16,4
13900
18,1
13400
19,4
12600
24,6
20850
27,2
20100
29,1
18900
5050
4800
4450
10100
9600
8900
15150
14400
13350
49
49
49
52
52
52
54
54
54
45
45
45
48
48
48
50
50
50
1x500
29
4,6
22
16
60
1x500
39
6,2
22
16
65
1x500
58
9,3
22
16
73
2x500
58
8,7
35
22
109
2x500
77
11,6
35
22
116
2x500
116
17,4
35
22
133
3x500
87
12,7
35
22
156
3x500
116
17,0
35
22
168
3x500
174
25,5
42
28
197
500
MODELO
MODEL
Silenciosos - Silent
CBS
13
CBS
14
CBS
26
CBS
29
CBS
40
CBS
43
11,9
13,1
23,9
26,3
35,8
39,4
10,2
8,0
11,2
8,8
20,5
15,9
22,4
17,5
30,7
23,9
33,6
26,3
t 15K (1)
kW
t 10K (2)
kW
t 7K (3)
Caudal de aire
Air flow
Nivel sonoro
Sound level
Ventiladores/Fans
400V/3/50 Hz
Superficie / Surface
Volumen interno / Circuit volume
Conexiones
Connections
Peso / Weight
kW
m3/h
dB(A)
n x mm
m2
dm3
I (mm)
O (mm)
Kg
6,8
7,5
13,6
15,0
20,5
22,4
5,6
6,1
11,1
12,3
16,7
18,4
4,8
3080
5,2
2920
9,6
6160
10,5
5840
14,3
9240
15,7
8760
2660
2500
5320
5000
7980
7500
28
28
31
31
33
33
25
25
28
28
30
30
1x500
29
4,6
22
16
56
1x500
39
6,2
22
16
60
2x500
58
8,7
22
16
100
2x500
77
11,6
22
16
108
3x500
87
12,7
35
22
142
3x500
116
17,0
35
22
155
I: Entrada - Inlet O: Salida - Outlet t: Salto trmico - Temperature difference dB(A): Nivel sonoro a 10m sin reflexin - Sound level at 10m echo free
(1) Capacidad nominal a efectos comparativos - Nominal capacity for comparison purposes
(2) Aplicacin para zonas fras - Application for cool environments
(3) Aplicacin para zonas clidas - Application for hot environments
100
SERIE CB
1x500
H
- Horizontal
- Vertical
2x500
CONDENSADORES
3x500
H
101
R-404A
630
CBN
94
MODELO
MODEL
CBN
107
CBN
121
CBN
140
CBN
160
CBN
181
CBN
189
CBN
210
t 15K (1)
kW
t 10K (2)
kW
t 7K (3)
Caudal de aire
Air flow
Nivel sonoro
Sound level
Ventiladores/Fans
400V/3/50 Hz
Superficie / Surface
Volumen interno / Circuit volume
Conexiones
Connections
Peso / Weight
kW
m3/h
dB(A)
n x mm
m2
dm3
I (mm)
O (mm)
Kg
93,6
107
121
140
160
181
189
210
77,0
62,4
86,4
71,1
94,0
80,4
116
93,6
130
107
141
121
147
126
164
140
51,3
57,6
62,7
77,0
86,4
94,0
98,1
109
43,7
49,7
56,3
65,5
74,6
84,4
88,0
97,8
35,9
28000
40,3
27000
43,9
25500
53,9
42000
60,5
40500
65,8
38250
68,7
56000
76,5
51600
21800
21000
20000
32700
31500
30000
41600
40500
62
62
62
64
64
64
65
65
57
57
57
59
59
59
60
60
2x630
118
17,4
54
35
192
2x630
157
23,1
54
35
208
2x630
236
34,7
54
35
242
3x630
177
25,6
54
35
278
3x630
236
34,2
66
42
304
3x630
354
51,3
66
42
354
4x630
385
38,3
66
42
404
4x630
513
51,1
66
42
453
CBS
92
CBS
104
CBS
113
630
MODELO
MODEL
Silenciosos - Silent
CBS
51
CBS
58
CBS
61
CBS
77
CBS
86
62,5
70,7
74,6
93,8
106
112
124
136
50,0
41,7
54,9
47,1
55,6
49,7
75,0
62,5
82,3
70,7
83,4
74,6
97,7
82,4
104
90,8
33,4
36,6
37,1
50,0
54,9
55,6
65,1
69,4
29,2
33,0
34,8
43,8
49,5
52,2
57,7
63,6
23,3
18000
25,6
17100
25,9
15700
35,0
27000
38,4
25650
38,9
23550
45,6
33100
48,6
30900
13820
12900
11620
20730
19350
17430
24700
22850
45
45
45
47
47
47
48
48
39
39
39
41
41
41
42
42
2x630
118
17,4
35
22
176
2x630
157
23,1
35
22
193
2x630
236
34,7
54
35
226
3x630
177
25,6
54
35
254
3x630
236
34,2
54
35
280
3x630
354
51,3
54
35
330
4x630
385
38,3
66
42
373
4x630
513
51,1
66
42
421
t 15K (1)
kW
t 10K (2)
kW
t 7K (3)
kW
Caudal de aire
Air flow
Nivel sonoro
Sound level
Ventiladores/Fans
400V/3/50 Hz
Superficie / Surface
Volumen interno / Circuit volume
Conexiones
Connections
Peso / Weight
m3/h
dB(A)
n x mm
m2
dm3
I (mm)
O (mm)
Kg
I: Entrada - Inlet O: Salida - Outlet t: Salto trmico - Temperature difference dB(A): Nivel sonoro a 10m sin reflexin - Sound level at 10m echo free
(1) Capacidad nominal a efectos comparativos - Nominal capacity for comparison purposes
(2) Aplicacin para zonas fras - Application for cool environments
(3) Aplicacin para zonas clidas - Application for hot environments
102
SERIE CB
2x630
- Horizontal
- Vertical
3x630
CONDENSADORES
4x630
H
103
R-404A
800
CBN CBN CBN CBN CBN CBN CBN CBN CBN CBN CBN CBN CBN
123 137 185 206 247 274 309 343 380 424 506 566 638
MODELO
MODEL
t 15K (1) kW
t 10K (2) kW
137
185
206
247
274
309
343
380
424
506
566
638
102
82,0
111
91,3
154
123
166
137
205
165
222
183
256
206
277
229
317
253
343
283
423
337
457
377
508
425
68,0
74,0
103
111
137
148
171
185
211
229
282
305
339
57,4
63,9
86,3
96,1
115
128
144
160
177
198
236
264
298
47,6
38400
51,8
36200
71,9
57600
77,5
95,7
54300 76800
104
119
72400 96000
129
148
160
197
90500 118800 111600 158400
29200
27000
43800
40500
58400
54000
73000
67500
90000
51
51
53
53
54
54
55
55
56
56
57
57
57
45
45
47
47
48
48
49
49
50
50
51
51
51
n x mm 2x800
277
m2
3
28,1
dm
54
I (mm)
35
O (mm)
305
Kg
2x800
370
37,4
54
35
338
3x800
416
41,5
66
42
445
3x800 4x800
554
554
55,4
55,0
66
66
42
42
496
585
4x800
739
73,3
79
54
653
5x800
693
68,5
79
54
726
5x800
924
91,3
79
54
811
6x800
866
86,0
2x66
2x42
907
t 7K (3) kW
Caudal de aire
Air flow
Nivel sonoro
Sound level
Ventiladores/Fans
400V/3/50 Hz
Superficie / Surface
Volumen interno / Circuit volume
Conexiones
Connections
Peso / Weight
123
m3/h
dB(A)
800
MODELO
MODEL
83400 120000
6x800 8x800
1155 1155
115
114
2x66 2x66
2x42 2x42
1015 1197
213
237
148800 140800
111200 107200
8x800 8x800
1540 2310
152
228
2x79 2x79
2x54 2x54
1340 1624
Silenciosos - Silent
CBS
73
CBS
78
CBS
110
CBS
117
CBS
146
CBS
156
CBS
183
CBS
195
CBS
226
CBS
243
CBS
301
CBS
324
67
72
101
107
135
143
169
179
207
220
276
294
52
45,0
54
47,8
78
67,4
81
71,6
104
89,9
108
95,5
130
112
135
119
159
138
166
147
213
184
222
196
34,7
36,1
52,0
54,2
69,3
72,2
86,6
90,3
106
111
142
148
31,5
33,4
47,2
50,1
62,9
66,9
78,7
83,6
96,8
103
129
137
24,3
15890
25,3
14700
36,4
23835
37,9
22050
48,5
31780
50,6
29400
60,6
39725
63,2
36750
74,4
48660
77,6
45150
99,2
64880
103
60200
11780
10930
17670
16395
23560
21860
29450
27325
36060
33540
48080
44720
39
39
41
41
42
42
43
43
44
44
45
45
33
33
35
35
36
36
37
37
38
38
39
39
2x800
277
28,1
42
28
293
2x800
370
37,4
42
28
327
3x800
416
41,5
54
35
428
3x800
554
55,4
54
35
479
4x800
554
55,0
54
35
562
4x800
739
73,3
66
42
630
5x800
693
68,5
66
42
698
5x800
924
91,3
66
42
783
6x800
866
86,0
2x54
2x35
874
6x800
1155
115
2x54
2x35
981
8x800
1155
114
2x66
2x42
1152
8x800
1540
152
2x66
2x42
1295
t 15K (1) kW
t 10K (2) kW
t 7K (3) kW
Caudal de aire
Air flow
Nivel sonoro
Sound level
Ventiladores/Fans
400V/3/50 Hz
Superficie / Surface
Volumen interno / Circuit volume
Conexiones
Connections
Peso / Weight
m3/h
dB(A)
n x mm
m2
dm3
I (mm)
O (mm)
Kg
I: Entrada - Inlet O: Salida - Outlet t: Salto trmico - Temperature difference dB(A): Nivel sonoro a 10m sin reflexin - Sound level at 10m echo free
(1) Capacidad nominal a efectos comparativos - Nominal capacity for comparison purposes
(2) Aplicacin para zonas fras - Application for cool environments
(3) Aplicacin para zonas clidas - Application for hot environments
104
SERIE CB
2x800
H
- Horizontal
- Vertical
3x800
H
4x800
CONDENSADORES
5x800
H
105
SERIE CB
6x800
H
- Vertical
8x800
H
106
- Horizontal
CAPACIDADES NOMINALES
ENTRE 73 Y 925 kW
CARACTERSTICAS
CHARACTERISTICS
Condensadores por aire con ventiladores axiales de 800 mm. y bateras en forma de V.
Serie VCN (normales)
Conexin : 900 rpm
Conexin : 680 rpm
Serie VCS (silenciosos)
Conexin : 450 rpm
Conexin : 350 rpm
Batera construida mediante una combinacin de tubo de cobre y aleta
de aluminio que proporciona un optimizado coeficiente de intercambio
trmico. La separacin de aletas es de 2,1 mm.
Sistema de batera flotante, que evita que los tubos entren en contacto
con las chapas soporte, asegurando una larga vida en ausencia de
fugas. Secciones separadas e independientes para cada ventilador.
Carrocera en acero galvanizado y lacado con resina poliester en blanco
RAL-9002 de elevada resistencia a la corrosin.
Ventiladores helicoidales con motor de rotor externo, trifsicos 400V
50Hz y dos velocidades. Con proteccin IP-54 y protector trmico
(Termocontacto).
Air cooled condensers with axial fans of diameter 800 mm. and coils forming a V.
Serie VCN (Normal)
Connection : 900 rpm
Connection : 680 rpm
Serie VCS (Silent)
Connection : 450 rpm
Connection : 350 rpm
Coil built with a combination of copper tube and aluminium fins specially
designed for condensation that provides an optimized coefficient of heat
exchange. The fin spacing is 2,1 mm.
Supported to the casing by means of a "floating" system that avoids any
kind of contact between the copper tubes and the supporting end plates,
assuring a long life for the condenser without leaks. Finned coil sections
separated and independent for each fan.
Casing made of galvanized steel painted in a corrosion resistant white
polyester RAL-9002.
External rotor axial fans, three phase motors 400V 50Hz two speed.
Protection IP-54 and with thermal protection (Thermocontact).
OPCIONES
OPTIONS
VC N -463
Conexin - Connection : Tringulo - Delta
Y: Estrella - Star
N Modelo - Model Nr.
Nivel sonoro - Level sound N: Normal - Normal
S: Silencioso - Silent
Serie modelo - Model serie
107
CONDENSADORES
NOMINAL CAPACITIES
BETWEEN 73 AND 925 kW
R-404A
800
MODELO
MODEL
VCN
154
VCN
172
VCN
231
VCN
258
VCN
307
VCN
344
VCN
385
VCN
430
VCN
461
VCN
515
154
172
231
258
308
344
385
430
461
515
127
103
139
115
191
154
209
172
254
205
278
229
318
257
348
287
381
307
418
343
t 15K (1) kW
t 10K (2) kW
t 7K (3) kW
Caudal de aire
Air flow
Nivel sonoro
Sound level
Ventiladores/Fans
400V/3/50 Hz
Superficie / Surface
Volumen interno / Circuit volume
Conexiones
Connections
Peso / Weight
m3/h
dB(A)
n x mm
m2
dm3
I (mm)
O (mm)
Kg
84,7
92,7
127
139
169
185
212
232
254
279
71,9
80,3
108
120
144
161
180
201
215
240
59,3
43600
64,9
42000
89,1
65400
97,5
63000
119
87200
130
84000
148
109000
162
105000
178
130800
195
126000
33400
32000
50100
48000
66800
64000
83500
80000
100200
96000
51
51
53
53
54
54
55
55
56
56
45
45
47
47
48
48
49
49
50
50
2x800
370
37,7
2x35
2x22
335
2x800
493
50,3
2x42
2x28
380
3x800
554
55,7
2x42
2x28
485
3x800
739
74,2
2x54
2x35
560
4x800
739
73,6
2x54
2x35
645
4x800
986
98,2
2x54
2x35
745
5x800
924
91,6
2x54
2x35
795
5x800
1232
122
2x66
2x42
920
6x800
1109
110
2x54
2x35
955
6x800
1478
146
2x66
2x42
1105
800
MODELO
MODEL
Silenciosos - Silent
VCS
89
VCS
95
VCS
134
VCS
143
VCS
178
VCS
191
VCS
223
VCS
239
VCS
267
VCS
286
80
85
120
127
159
170
199
212
239
255
61
53,1
64
56,6
91
79,7
96
85,0
122
106
127
113
152
133
159
142
183
159
191
170
t 15K (1) kW
t 10K (2) kW
40,6
42,5
61,0
63,7
81,3
84,9
102
106
122
127
37,2
39,6
55,8
59,5
74,4
79,3
93,0
99,1
112
119
m3/h
28,4
18000
29,7
17000
42,7
27000
44,6
25500
56,9
36000
59,5
34000
71,1
45000
74,3
42500
85,3
54000
89,2
51000
13300
12600
19950
18900
26600
25200
33250
31500
39900
37800
dB(A)
39
39
41
41
42
42
43
43
44
44
33
33
35
35
36
36
37
37
38
38
2x800
370
37,7
2x28
2x22
325
2x800
493
50,3
2x28
2x22
370
3x800
554
55,7
2x35
2x22
470
3x800
739
74,2
2x42
2x28
545
4x800
739
73,6
2x42
2x28
625
4x800
986
98,2
2x42
2x28
725
5x800
924
91,6
2x54
2x35
770
5x800
1232
122
2x42
2x28
895
6x800
1109
110
2x54
2x35
925
6x800
1478
146
2x66
2x42
1075
t 7K (3) kW
Caudal de aire
Air flow
Nivel sonoro
Sound level
Ventiladores/Fans
400V/3/50 Hz
Superficie / Surface
Volumen interno / Circuit volume
Conexiones
Connections
Peso / Weight
n x mm
m2
dm3
I (mm)
O (mm)
Kg
I: Entrada - Inlet O: Salida - Outlet t: Salto trmico - Temperature difference dB(A): Nivel sonoro a 10m sin reflexin - Sound level at 10m echo free
(1) Capacidad nominal a efectos comparativos - Nominal capacity for comparison purposes
(2) Aplicacin para zonas fras - Application for cool environments
(3) Aplicacin para zonas clidas - Application for hot environments
108
CONDENSADORES
SERIE VC
800
109
R-404A
800
MODELO
MODEL
VCN
276
VCN
308
VCN
413
VCN
463
VCN
551
VCN
617
VCN
689
VCN
771
VCN
827
VCN
925
276
308
413
463
551
617
689
771
827
925
229
184
252
205
343
275
377
309
458
367
503
411
572
459
629
514
686
551
755
617
t 15K (1) kW
t 10K (2) kW
t 7K (3) kW
Caudal de aire
Air flow
Nivel sonoro
Sound level
Ventiladores/Fans
400V/3/50 Hz
Superficie / Surface
Volumen interno / Circuit volume
Conexiones
Connections
Peso / Weight
m3/h
dB(A)
n x mm
m2
dm3
I (mm)
O (mm)
Kg
153
168
229
251
305
335
381
419
457
503
129
144
193
216
257
288
322
360
386
432
107
80800
118
77200
160
121200
176
115800
214
161600
235
154400
267
202000
294
193000
320
242400
352
231600
62000
59200
93000
88800
124000
118400
155000
148000
186000
177600
54
54
56
56
57
57
58
58
59
59
48
48
50
50
51
51
52
52
53
53
4x800
616
62,8
2x54
2x35
720
4x800
821
83,8
2x54
2x35
770
6x800
924
92,8
2x54
2x35
1020
6x800
1232
124
2x66
2x42
1100
8x800
1232
123
2x79
2x54
1330
8x800
1643
164
2x66
2x42
1430
10x800
1540
153
2x79
2x54
1630
10x800
2053
203
2x79
2x54
1760
12x800
1848
183
2x79
2x54
1930
12x800
2464
243
2x79
2x54
2090
800
Silenciosos - Silent
VCS
162
VCS
174
VCS
244
VCS
262
VCS
325
VCS
349
VCS
406
VCS
436
VCS
487
VCS
523
144
153
215
230
287
306
359
383
431
459
110
95,7
115
102
166
144
173
153
221
191
230
204
276
239
288
255
331
287
345
306
73,6
76,7
110
115
147
153
184
192
221
230
67,0
71,5
100
107
134
143
167
179
201
214
m3/h
51,5
33400
53,7
31200
77,3
50100
80,5
46800
103
66800
107
62400
129
83500
134
78000
155
100200
161
93600
24700
23200
37050
34800
49400
46400
61750
58000
74100
69600
dB(A)
42
42
44
44
45
45
46
46
47
47
36
36
38
38
39
39
40
40
41
41
4x800
616
62,8
2x42
2x28
700
4x800
821
83,8
2x54
2x35
750
6x800
924
92,8
2x54
2x35
990
6x800
1232
124
2x54
2x35
1070
8x800
1232
123
2x54
2x35
1290
8x800
1643
164
2x54
2x35
1390
10x800
1540
153
2x66
2x42
1580
10x800
2053
203
2x66
2x42
1710
12x800
1848
183
2x79
2x54
1870
12x800
2464
243
2x79
2x54
2030
MODELO
MODEL
t 15K (1) kW
t 10K (2) kW
t 7K (3) kW
Caudal de aire
Air flow
Nivel sonoro
Sound level
Ventiladores/Fans
400V/3/50 Hz
Superficie / Surface
Volumen interno / Circuit volume
Conexiones
Connections
Peso / Weight
n x mm
m2
dm3
I (mm)
O (mm)
Kg
I: Entrada - Inlet O: Salida - Outlet t: Salto trmico - Temperature difference dB(A): Nivel sonoro a 10m sin reflexin - Sound level at 10m echo free
(1) Capacidad nominal a efectos comparativos - Nominal capacity for comparison purposes
(2) Aplicacin para zonas fras - Application for cool environments
(3) Aplicacin para zonas clidas - Application for hot environments
110
CONDENSADORES
SERIE VC
800
111
SERIE VC
VC SERIES
INSTALACIN
INSTALLATION
112
CAPACIDADES NOMINALES
ENTRE 4,2 Y 41,8 kW
CARACTERSTICAS
CHARACTERISTICS
Air cooled condensers with single phase axial fans of 300 and 400
mm.
Coil built with a combination of copper tube and aluminium fins specially
designed for condensation that provides an optimized coefficient of heat
exchange. The fin spacing is 2,1 mm.
Carcasa en acero galvanizado y lacado con resina poliester en blanco RAL9002 de elevada resistencia a la corrosin.
Con soportes de acero zincado para su anclaje al suelo.
Ventiladores helicoidales monofsicos a 230V 50Hz de rotor externo con proteccin IP-44 y protector trmico incorporado. Por su condicin de monofsico
permite la fcil regulacin de velocidad para el control de la condensacin.
Casing made of galvanized steel painted in a corrosion resistant white polyester RAL-9002.
With zinced steel supports for anchoring to the floor.
Axial fans, single-phase 230V 50 Hz, fitted with external rotor with IP-44
protection and incorporated thermal protector. The fact of being singlephase allows their easy speed regulation for condensation control.
OPTIONS
OPCIONES
CPN -313 V
Posicin - Position
V: Vertical - Vertical
H: Horizontal - Horizontal
113
CONDENSADORES
NOMINAL CAPACITIES
BETWEEN 4,2 AND 41,8 kW
R-404A
MODELO
MODEL
CPN
42
CPN
54
CPN
83
CPN
109
CPN
153
CPN
209
CPN
283
CPN
313
CPN
377
CPN
418
t 15K (1)
4160
5440
8320
10880
Capacidades de aplicacin
Application capacities
t 10K (2)
t 7K (3)
W
W
2770
1940
3630
2540
5550
3880
7250
5080
10220
7150
13930
9750
18860
13200
20890
14620
25150
17600
27850
19500
m3/h
1360
1235
2720
2470
5420
5030
7800
7545
10400
10060
dB(A)
35
35
38
38
45
45
47
47
48
48
Ventiladores / Fans
230V/1/50 Hz 1350 r.p.m
Consumo / Consumption
Potencia absorbida / Power input
nx
A
W
1x300
0,38
80
1x300
0,38
80
2x300
0,76
160
2x300
0,76
160
2x400
1,32
300
2x400
1,32
300
3x400
1,98
450
3x400
1,98
450
4x400
2,64
600
4x400
2,64
600
Superficie / Surface
m2
6,6
13,3
13,2
26,3
20,5
41,0
46,0
61,4
61,3
81,7
dm
1,0
2,1
1,9
3,7
2,8
5,7
6,2
8,2
8,1
10,8
I (mm)
O (mm)
3/8
3/8
22
16
22
16
22
16
22
16
22
16
28
22
28
22
28
22
28
22
Kg
12
15
21
26
29
36
47
53
61
69
Conexiones
Connections
Peso neto / Net weight
37720 41780
I: Entrada - Inlet O: Salida - Outlet t: Salto trmico - Temperature difference dB(A): Nivel sonoro a 10m sin reflexin - Sound level at 10m echo free
(1) Capacidad nominal a efectos comparativos - Nominal capacity for comparison purposes
(2) Aplicacin para zonas fras - Application for cool environments
(3) Aplicacin para zonas clidas - Application for hot environments
SERIE CPN
400
300
114
CAPACIDADES NOMINALES
ENTRE 770 Y 10390 W
CARACTERSTICAS
CHARACTERISTICS
Condensadores por aire de alto rendimiento para compresores hermticos. Estn construidos con tubo de cobre al tresbolillo y aletas de aluminio conformadas con geometra especial y paso de 4 mm.
Highly efficient air cooled condenser for hermetic compressors are manufactured with copper tube in a staggered position and corrugated aluminium fins with 4 mm fin spacing special geometry.
The normal version consists of a shell of galvanised steel and duct for the
standardized fans with orifice diameters of 203, 254, 305 and 356 mm
for use with all totally hermetic compressors on the market with a power
ranging from 1/6 to 3 HP.
The fans and their rate of air flow are the ones recommended for an efficient performance and capacity as indicated in the data sheet.
Pueden suministrarse sobre demanda en otras dos versiones ms sencillas sin coraza ni embocadura de ventilador, con solo un techo en la parte
superior, denominados NCF-T o solamente la batera condensadora,
denominados NCF-S.
Supplied on option demand without neither shell nor fan duct, having only
a roof over the top, models named NCF-T, or only the condensing coil,
models named NCF-S.
For special types other than the ones mentioned above with different fin
spacing, other dimensions, etc., assigned to be manufacturerd in important series, consult us in order to carry out an appropiate study.
NCF -S -104 D
D: Modelos dobles - Double models
N Modelo - Model Nr.
Tipo - Type
115
CONDENSADORES
NOMINAL CAPACITIES
BETWEEN 770 AND 10390 W
SERIE NCF
116
CAPACIDADES NOMINALES
ENTRE 10 Y 527 kW
CARACTERSTICAS
CHARACTERISTICS
Air cooled condensers with centrifugal fans to be installed in the compressors room and with the possibility of connecting ducts to carry the air
towards the outside.
Two series are built according to the centrifugal fan speed: KCN (Normal)
and KCS (Silent).
Coil built with a combination of copper tube and aluminium fins specially
designed for condensation that provides an optimized coefficient of heat
exchange. The fin spacing is 2,1 mm.
Coil with a "floating" system to avoid any contact between the tubes and
the end plates, assuring a long life for the condenser without leaks. Finned
coil sections separated and independent for each fan.
Caising made of galvanized steel with a design of great strength and
resistance and large lateral panels easy removable.
Centrifugal fans type 9/9,10/10 and 12/12 are direct driven with external rotor motor three phase 230/400V 50/60Hz and protection IP-54.
Condensers with fans type 18/18 have the motor placed on a frame outside the centrifugal fan and the drive is made by means of belts and
pulleys. Three phase motors 230/400V 50Hz.
OPCIONES
OPTIONS
KC N -110 -1
Posicin - Position (1-6)
N Modelo - Model Nr.
Nivel sonoro - Level sound N: Normal - Normal
S: Silencioso - Silent
Serie modelo - Model serie
117
CONDENSADORES
NOMINAL CAPACITIES
BETWEEN 10 AND 527 kW
R-404A
9/9
KCN
14
KCN
17
KCN
25
KCN
29
KCN
33
KCN
37
KCN
43
KCN
50
0Pa
12,8
15,0
17,9
25,6
30,0
35,8
38,4
45,0
53,7
50Pa
100Pa
150Pa
12,4
12,1
11,7
14,6
14,1
13,6
17,3
16,6
15,9
24,8
24,2
23,4
29,2
28,2
27,2
34,6
33,2
31,8
37,2
36,3
35,1
43,8
42,3
40,8
51,9
49,8
47,7
0Pa
4470
4330
4100
8940
8660
8200
13410
12990
12300
50Pa
100Pa
150Pa
4280
4090
3870
4150
3960
3730
3920
3710
3500
8560
8180
7740
8300
7920
7460
7840
7420
7000
12840
12270
11610
12450
11880
11190
11760
11130
10500
57
57
57
60
60
60
62
62
62
1
3,2
0,55
17,9
3,0
22
16
46
1
3,2
0,55
23,8
3,9
22
16
49
1
3,2
0,55
35,7
5,9
22
16
54
2
6,4
1,1
35,7
5,5
28
22
86
2
6,4
1,1
47,6
7,3
28
22
91
2
6,4
1,1
71,4
10,9
28
22
100
3
9,6
1,65
53,6
8,0
28
22
126
3
9,6
1,65
71,4
10,6
28
22
132
3
9,6
1,65
107
15,9
28
22
146
MODEL
t 15K
Caudal de aire
Air flow
kW
m3/h
Nivel sonoro
Sound level
Ventiladores / Fans
Consumo / Consumption
Potencia absorbida / Power input
Superficie / Surface
Volumen interior / Circuit volume
Conexiones
Connections
Peso / Weight
dB(A)
n
A (max)
kW
m2
dm3
I (mm)
O (mm)
Kg
9/9
MODELO
MODEL
Capacidad nominal
Nominal capacity
t 15K
Caudal de aire
Air flow
Nivel sonoro
Sound level
Ventiladores / Fans
Consumo / Consumption
Potencia absorbida / Power input
Superficie / Surface
Volumen interior / Circuit volume
Conexiones
Connections
Peso / Weight
3 ~ 230/400V 50/60Hz
KCN
12
MODELO
Capacidad nominal
Nominal capacity
1.300 rpm
900 rpm
3 ~ 230/400V 50/60Hz
KCS
10
KCS
11
KCS
13
KCS
20
KCS
23
KCS
25
KCS
30
KCS
33
KCS
38
0Pa
10,1
11,8
13,5
20,2
23,6
27,0
30,3
35,4
40,5
kW
50Pa
100Pa
9,5
8,8
11,0
10,0
12,5
10,8
19,0
17,6
22,0
20,0
25,0
21,6
28,5
26,4
33,0
30,0
37,5
32,4
0Pa
3070
3010
2840
6140
6020
5680
9210
9030
8520
m3/h
50Pa
100Pa
2820
2500
2730
2400
2580
2230
5640
5000
5460
4800
5160
4460
8460
7500
8190
7200
7740
6690
48
48
48
51
51
51
53
53
53
1
0,9
245
17,9
3,0
22
16
43
1
0,9
245
23,8
3,9
22
16
46
1
0,9
245
35,7
5,9
22
16
51
2
1,8
490
35,7
5,5
28
22
80
2
1,8
490
47,6
7,3
28
22
85
2
1,8
490
71,4
10,9
28
22
94
3
2,7
735
53,6
8,0
28
22
117
3
2,7
735
71,4
10,6
28
22
123
3
2,7
735
107
15,9
28
22
137
dB(A)
n
A (max)
W
m2
dm3
I (mm)
O (mm)
Kg
I: Entrada - Inlet O: Salida - Outlet t: Salto trmico - Temperature difference dB(A): Nivel sonoro a 10m sin reflexin - Sound level at 10m echo free
POSICIN - POSITION
118
SERIE KC
9/9
- Horizontal
H
V
- Vertical
CONDENSADORES
H
V
119
R-404A
12/12
MODELO
MODEL
Capacidad nominal
Nominal capacity
t 15K
Caudal de aire
Air flow
kW
m3/h
Nivel sonoro
Sound level
Ventiladores / Fans
Consumo / Consumption
Potencia absorbida / Power input
Superficie / Surface
Volumen interior / Circuit volume
Conexiones
Connections
Peso / Weight
900 rpm
KCN
24
Nivel sonoro
Sound level
Ventiladores / Fans
Consumo / Consumption
Potencia absorbida / Power input
Superficie / Surface
Volumen interior / Circuit volume
Conexiones
Connections
Peso / Weight
dB(A)
n
A (max)
kW
m2
dm3
I (mm)
O (mm)
Kg
KCN
94
KCN
110
KCN
125
26,6
31,3
45,2
53,2
62,6
67,8
79,8
93,9
106
125
25,7
24,6
23,5
29,9
28,5
26,7
44,0
42,4
40,4
51,4
49,2
47,0
59,8
57,0
53,4
66,0
63,6
60,6
77,1
73,8
70,5
89,7
85,5
80,1
103
98,4
94,0
120
114
107
0Pa
7560
7390
7000
15120
14780
14000
22680
22170
21000
29560
28000
50Pa
100Pa
150Pa
7250
6830
6330
7040
6580
6170
6590
6180
5700
14500
13660
12660
14080
13160
12340
13180
12360
11400
21750
20490
18990
21120
19740
18510
19770
18540
17100
28160
26320
24680
26360
24720
22800
58
58
58
61
61
61
63
63
63
64
64
1
3,3
1,1
33,2
5,3
28
22
78
1
3,3
1,1
44,3
7,0
28
22
83
1
3,3
1,1
66,4
10,5
28
22
92
2
6,6
2,2
66,4
9,9
28
22
146
2
6,6
2,2
88,5
13,2
35
22
154
2
6,6
2,2
133
19,8
35
22
171
3
9,9
3,3
99,6
14,6
35
22
213
3
9,9
3,3
133
19,4
42
28
225
3
9,9
3,3
199
29,1
42
28
251
4
13,2
4,4
177
25,6
54
35
297
4
13,2
4,4
266
38,4
54
35
330
n
A (max)
kW
m2
dm3
I (mm)
O (mm)
Kg
m3/h
KCN
82
22,0
21,2
20,2
MODEL
Caudal de aire
Air flow
KCN
71
22,6
dB(A)
kW
KCN
63
0Pa
MODELO
t 15K
KCN
55
50Pa
100Pa
150Pa
10/10
Capacidad nominal
Nominal capacity
3 ~ 230/400V 50/60Hz
900 rpm
3 ~ 230/400V 50/60Hz
KCS
17
KCS
19
KCS
22
KCS
34
KCS
39
KCS
44
KCS
51
KCS
58
KCS
65
KCS
78
KCS
87
0Pa
17,1
19,8
22,7
34,2
39,6
45,4
51,3
59,4
68,1
79,2
90,8
50Pa
100Pa
150Pa
16,4
15,5
14,2
18,9
17,8
16,1
21,4
19,5
16,8
32,8
31,0
28,4
37,8
35,6
32,2
42,8
39,0
33,6
49,2
46,5
42,6
56,7
53,4
48,3
64,2
58,5
50,4
75,6
71,2
64,4
85,6
78,0
67,2
0Pa
4910
4840
4700
9820
9680
9400
14730
14520
14100
19360
18800
50Pa
100Pa
150Pa
4630
4260
3760
4560
4180
3650
4410
4030
3460
9260
8520
7520
9120
8360
7300
8820
8060
6920
13890
12780
11280
13680
12540
10950
13230
12090
10380
18240
16720
14600
17640
16120
13840
54
54
54
57
57
57
59
59
59
60
60
1
1,7
0,35
33,2
5,3
22
16
71
1
1,7
0,35
44,3
7,0
22
16
76
1
1,7
0,35
66,4
10,5
22
16
85
2
3,4
0,7
66,4
9,9
28
22
132
2
3,4
0,7
88,5
13,2
28
22
140
2
3,4
0,7
133
19,8
35
22
157
3
5,1
1,05
99,6
14,6
35
22
192
3
5,1
1,05
133
19,4
35
22
204
3
5,1
1,05
199
29,1
35
22
230
4
6,8
1,75
177
25,6
42
28
269
4
6,8
1,75
266
38,4
54
35
302
I: Entrada - Inlet O: Salida - Outlet t: Salto trmico - Temperature difference dB(A): Nivel sonoro a 10m sin reflexin - Sound level at 10m echo free
POSICIN - POSITION
120
SERIE KC
10/10 y 12/12
H - Horizontal
V - Vertical
CONDENSADORES
H
V
H
V
121
R-404A
18/18
MODELO
MODEL
0 Pa
686 rpm
kW
t 15K
m3/h
100 Pa
725 rpm
kW
t 15K
m3/h
200 Pa
769 rpm
kW
t 15K
400V / 3 / 50Hz
KCN
134
KCN
153
KCN
201
KCN
229
KCN
268
KCN
306
KCN
335
KCN
382
KCN
458
KCN
527
134
153
201
229
268
306
335
382
458
527
41800
40500
62700
60750
83600
81000
104500
101250
121500
118200
130
148
195
222
260
295
326
369
443
509
40000
38700
60000
58050
80000
77400
100000
96750
116100
113400
127
143
190
214
253
286
317
357
429
490
m3/h
38400
37000
57600
55500
76800
74000
96000
92500
111000
108000
dB(A)
61
61
63
63
64
64
65
65
66
66
2
24
11
286
28
54
35
570
2
24
11
382
37
54
35
604
3
36
16,5
429
41
54
35
850
3
36
16,5
572
54
66
42
900
4
48
22
572
54
79
54
1115
4
48
22
763
72
79
54
1180
5
60
27,5
716
67
79
54
1390
5
60
27,5
954
89
79
54
1470
6
72
33
1145
107
79
54
1755
6
72
33
1717
160
79
54
1950
n
A (max)
kW
m2
dm3
I (mm)
O (mm)
Kg
18/18
MODELO
MODEL
0 Pa
493 rpm
kW
t 15K
m3/h
100 Pa
550 rpm
kW
t 15K
m3/h
200 Pa
618 rpm
kW
t 15K
230/400V / 3 / 50Hz
KCS
107
KCS
120
KCS
161
KCS
180
KCS
214
KCS
240
KCS
268
KCS
300
KCS
359
KCS
400
107
120
161
180
214
240
268
300
359
400
30200
29200
45300
43800
60400
58400
75500
73000
87600
84600
101
112
152
167
202
223
253
279
335
369
27800
26700
41700
40050
55600
53400
69500
66750
80100
77400
95
104
143
156
190
208
238
261
313
342
m3/h
25600
24500
38400
36750
51200
49000
64000
61250
73500
70800
dB(A)
51
51
53
53
54
54
55
55
56
56
2
10,6
4,4
286
28
54
35
520
2
10,6
4,4
382
37
54
35
554
3
15,9
6,6
429
41
54
35
775
3
15,9
6,6
572
54
66
42
825
4
21,2
8,8
572
54
66
42
1015
4
21,2
8,8
763
72
66
42
1080
5
26,5
11
716
67
79
54
1265
5
26,5
11
954
89
79
54
1345
6
31,8
13,2
1145
107
79
54
1605
6
31,8
13,2
1717
160
79
54
1800
n
A (max)
kW
m2
dm3
I (mm)
O (mm)
Kg
I: Entrada - Inlet O: Salida - Outlet t: Salto trmico - Temperature difference dB(A): Nivel sonoro a 10m sin reflexin - Sound level at 10m echo free
POSICIN - POSITION
122
SERIE KC
18/18
H - Horizontal
CONDENSADORES
V - Vertical
H
V
123
SERIE KC
18/18
- Vertical
124
- Horizontal
- Vertical
- Horizontal
CONDENSADORES
ventiladores EC
CONDENSERS
CARACTERSTICAS GENERALES
GENERAL CHARACTERISTICS
Condensadores con ventiladores axiales de conmutacin electrnica con carrocera de forma cbica clsica y ventiladores de 500
y 800 (serie CBE), con bateras colocadas en V y ventiladores
de 800 y 910 (serie VCE) y condensadores con ventiladores
radiales de 630 (serie VRE).
Dentro de cada gama hay una gran variedad de modelos que
abarcan todo el rango de potencias necesario para poder elegir el
modelo ms adecuado a cada necesidad concreta.
Las bateras estn construidas con una eficaz combinacin tubo de
cobre y aletas de aluminio corrugadas especialmente diseada
para condensacin que proporciona un elevado coeficiente de
intercambio trmico.
Llevan un sistema de batera flotante, que evita que los tubos de
cobre entren en contacto con las chapas soporte de los extremos,
asegurando una larga vida al condensador en ausencia de fugas.
Las carroceras estn construidas en acero galvanizado y lacado
con resina polister en blanco RAL-9002 de gran rigidez y resistencia a la corrosin.
Todos los condensadores cumplen con los requerimientos que les
son aplicables de las Directivas Europeas de Mquinas 2006/42/CE,
de Baja Tensin 2006/95/CE y de Equipos a Presin 97/23/CE.
Air cooled condensers with axial fan motors electronically commutated with casing of classic cubic shape of 500 and 800 fan
motors (CBE series), V-shaped coils with 800 and 910 fan
motors (VCE series), and condensers with radial fan motors of
630 (VRE series).
Within each range there is a great variety of models covering all the
capacity range necessary for choosing the most suitable unit for
every specific need.
The coils are built with an effective combination of copper tube and
corrugated aluminum fins specially designed for condensation that
provides a high coefficient of thermal exchanging.
They incorporate a special floating coil system that avoids any
kind of contact between the tubes and the supporting end plates,
providing a lifelong use for condensers without leaks.
The casings are made of galvanized steel coated with an RAL-9002
white polyurethane resin of great structural strength and corrosion
resistance.
All the condensers comply with applicable Machine Directive
2006/42/CE, Low Voltage Directive 2006/95/CE and Pressure
Equipment Directive 97/23/CE.
VENTILADORES EC
EC FAN MOTORS
Son ventiladores que se conectan a la corriente de lnea alterna trifsica AC aunque internamente los motores funcionan con corriente continua DC con conmutacin electrnica (sin escobillas).
Llevan integrado un control electrnico que cumple la triple funcin
de convertir la corriente AC en DC, de realizar la conmutacin y de
controlar la velocidad del ventilador.
Las ventajas de estos ventiladores son:
Valen para todo tipo de lneas elctricas ya que funcionan con
corriente trifsica de 50 o 60Hz y con tensiones de 380 a 480V.
Tienen una eficiencia superior a los ventiladores convencionales AC
en cualquier rgimen de giro, especialmente a bajas velocidades.
Al llevar integrado un sistema de control de la velocidad programable, la regulacin es mucho ms sencilla que con un ventilador trifsico tipo AC controlado mediante un variador de frecuencia aadido al condensador o colocado en la sala de control.
La regulacin de velocidad es totalmente silenciosa, al contrario
de lo que ocurre con los ventiladores AC, cuyos sistemas de regulacin producen ruido.
These fan motors use the standard three phase AC mains supply
but internally run with DC voltage and are electronically commutated (brushless).
They incorporate integrated electronics that fulfil the triple function
of converting AC current into DC, perform the commutation and
control the fan speed.
The benefits of the EC fan motors are:
Can be operated with all kinds of electric mains since the working
range is 380 to 480V three phase 50/60Hz.
They are more efficient than standard AC motors in the whole
range but specially at low speed.
As they have an integrated control that can be programmed, the
speed regulation is much more simple than with three phase AC
fan motors that are controlled by an inverter that must be added
to the condensing unit or placed in the control room.
The speed control is totally silent, contrary to what happens with
AC fan motors, whose speed control systems are noisy.
Sistema de regulacin
Speed control
127
CONDENSADORES
CONDENSADORES
CONDENSADORES
CONDENSERS
CLCULO DE LA CAPACIDAD
CAPACITY CALCULATION
Nomenclatura utilizada
Qn
Capacidad Nominal del condensador
Qf
Capacidad frigorfica de la instalacin
Tev
Temperatura de evaporacin C
Tc
Temperatura de condensacin C
Tam
Temperatura del aire en el ambiente C
t
Salto trmico (Tc-Tam)
Fc
Factor calor de compresin
Fr
Factor del refrigerante
Fa
Factor de altitud
Word list
Qn
Qf
Tev
Tc
Tam
t
Fc
Fr
Fa
SELECCIN DE UN CONDENSADOR
SELECTION OF A CONDENSER
A partir de las temperaturas de evaporacin Tev y de condensacin Tc, entrando en el grfico siguiente se calcula el Factor del
calor de compresin Fc.
Knowing the refrigerant to be used and the altitude of the site where
the condenser will be placed, the factors Fr and Fa will be obtained
in the following tables.
Altitud - Altitude m.
400
800
1200 1600
2000
Refrigerante - Refrigerant
R-404A
R-22
R-134a
Fa
1,03
1,06
1,09
1,16
Fr
1,04
1,07
128
1,12
CONDENSADORES
CONDENSERS
Qn = Qf x 15 x Fc x Fr x Fa
t
Qn = Qf x 15 x Fc x Fr x Fa
t
Entrando en la tabla de datos del condensador de la gama elegida, se selecciona el modelo que tenga la Capacidad Nominal que
ms se aproxime por arriba a Qn y que cumpla con las condiciones requeridas de nivel sonoro y consumo elctrico.
En el sitio Web www.frimetal.es hay disponible un programa de
descarga libre que permite la seleccin rpida de un condensador
de cualquier gama de las fabricadas por FRIMETAL.
1. Factores de correccin
Correction factors
CONDICIONES DE TRABAJO
WORKING CONDITIONS
Qf = 80 kW
Tev = -20C
Tc = +45C
t = 8 K
2. Capacidad Nominal
Nominal Capacity
Fc = 1,55
Fr = 1
Fa = 1,06
Tev, Tc
R-404A
CONDENSADORES
800 m
3. Seleccin de catlogo
Catalogue selection
GAMA - RANGE
VCE 800
MODELO
MODEL
Qn
kW
db(A)
10 m
Motores
kW
246
268
245
49
43
36
5,7
3,0
1,2
CBE
MODELO
MODEL
Qn
kW
db(A)
10 m
Motores
kW
259
250
257
50
44
39
6,0
3,1
1,6
GAMA - RANGE
VCE 910
MODELO
MODEL
Qn
kW
db(A)
10 m
Motores
kW
240
263
257
50
45
38
5,0
3,2
1,5
129
CONDENSADORES
CONDENSERS
NIVEL SONORO
SOUND LEVEL
GR-1
GR-1
GR-2
EJEMPLO - EXAMPLE
dB(A)?
2 x CBE-259 1025 rpm
a 20 m.
CATALOGO
CBE-259 => 50 dB(A)
dB(A)
50 - 6 + 3 = 47
20 m => -6 dB(A)
GR-1
The electrical consumption and power input data of the fan motors
shown on the catalogue refer to an ambient temperature of
+20C. It is necessary to have in mind that at low temperatures
both the consumption and power input increase about a 16% for
air temperatures of -20C and a 25% for temperatures of -40C.
This must be taken into account by the installer at the moment of
calculating the elements of the electric panel of he cold installation.
130
AIR COOLED
CONDENSERS WITH
ELECTRONIC EC
AXIAL FANS
CAPACIDADES NOMINALES
ENTRE 76 Y 661 kW
NOMINAL CAPACITIES
BETWEEN 76 AND 661 kW
CARACTERSTICAS
CHARACTERISTICS
OPCIONES
OPTIONS
Three phase AC fan motors with the posibility of installing an inverter for
controlling the speed.
CB E -443 H
Posicin - Position
N Modelo - Model Nr.
Ventilador - Fan motor
Serie
V: Vertical - Vertical
H: Horizontal - Horizontal
E: Electrnico EC - Electronic EC
N: Trifsico AC normal - Three phase AC normal
S: Trifsico AC silencioso - Three phase AC silent
131
CONDENSADORES
CONDENSADORES
CON VENTILADORES
AXIALES
ELECTRNICOS EC
R-404A
500
CBE
26
MODELO
MODEL
1610 rpm
CBE
30
CBE
35
CBE
53
CBE
61
CBE
70
CBE
79
CBE
91
CBE
105
Capacidades - Capacities
Nominal - Nominal
Aplicacin - Application
Aplicacin - Application
t 15K (1) kW
t 10K (2) kW
t 07K (3) kW
26,3
30,4
35,0
52,6
60,7
70,1
78,8
91,1
105
17,5
12,3
20,2
14,2
23,4
16,4
35,0
24,5
40,5
28,3
46,7
32,7
52,6
36,8
60,7
42,5
70,1
49,1
8700
0,88
1,38
45
8350
0,91
1,41
44
7700
0,94
1,49
44
17400
1,76
2,76
48
16700
1,82
2,82
47
15400
1,88
2,98
47
26100
2,64
4,14
50
25050
2,73
4,23
49
23100
2,82
4,47
49
21,8
24,8
27,8
43,7
49,7
55,7
65,5
74,5
83,5
6480
0,40
0,57
38
6180
0,41
0,58
38
5740
0,43
0,62
38
12960
0,80
1,14
41
12360
0,82
1,16
41
11480
0,86
1,24
41
19440
1,20
1,71
43
18540
1,23
1,74
43
17220
1,29
1,86
43
16,3
18,2
19,0
32,6
36,5
38,0
49,0
54,7
56,9
4320
0,13
0,17
30
4120
0,14
0,17
29
3830
0,14
0,18
29
8640
0,26
0,34
33
8240
0,28
0,34
32
7660
0,28
0,36
32
12960
0,39
0,51
35
12360
0,42
0,51
34
11490
0,42
0,54
34
38
6,0
22
16
50
7,9
22
16
76
11,9
22
16
76
11,2
22
16
101
15,0
35
22
151
22,5
35
22
113
16,5
35
22
151
22,0
35
22
227
33,1
35
22
1x500
1x500
3x500
3x500
55
59
149
174
m3/h
kW
A
dB(A)
1200 rpm
Capacidad - Capacity
Nominal - Nominal
t 15K (1) kW
m3/h
kW
A
dB(A)
800 rpm
Capacidad - Capacity
Nominal - Nominal
t 15K (1) kW
m3/h
kW
A
dB(A)
m2
dm3
mm
mm
nx
Kg
3 ~ 380-480V
1x500
68
50/60 Hz
2x500
96
132
1610 rpm
1,9 A
2x500
2x500
104
121
1,05 kW
3x500
137
1x500
SERIE CBE
Horizontal
Vertical
2x500
CONDENSADORES
Horizontal
Vertical
3x500
Horizontal
Vertical
133
R-404A
800
MODEL
CBE
77
1025 rpm
MODELO
CBE
87
CBE
152
CBE
173
CBE
228
CBE
259
CBE
304
CBE
345
CBE
389
CBE
443
CBE
518
CBE
591
CBE
661
Capacidades - Capacities
Nominal - Nominal
Aplicacin - Application
Aplicacin - Application
t 15K (1) kW
t 10K (2) kW
t 07K (3) kW
76
86
152
173
228
259
304
345
389
443
518
591
661
51
36
58
40
101
71
115
81
152
107
173
121
203
142
230
161
259
181
295
207
345
242
394
276
441
308
m3/h 22400
1,9
kW
3,0
A
44
dB(A)
21350
2,0
3,1
45
44800
3,8
5,9
47
42700
4,0
6,1
48
67200
5,8
8,9
49
64050
6,0
9,2
50
89600
7,7
11,8
50
85400 122400
8,0
12,4
12,2
19,0
51
54
750 rpm
Capacidad - Capacity
Nominal - Nominal
t 15K (1) kW
62
69
125
138
187
208
250
277
322
m3/h 16400
0,76
kW
1,1
A
38
dB(A)
15600
0,80
1,2
38
32800
1,5
2,3
41
31200
1,6
2,4
41
49200
2,3
3,4
43
46800
2,4
3,5
43
65600
3,1
4,5
44
62400
3,2
4,7
44
89550
5,0
7,4
47
358
429
477
494
500 rpm
Capacidad - Capacity
Nominal - Nominal
t 15K (1) kW
46
49
91
99
137
148
183
197
238
257
317
342
339
m3/h 10900
0,25
kW
0,35
A
29
dB(A)
10400
0,26
0,36
30
21800
0,49
0,70
32
20800
0,51
0,72
33
32700
0,74
1,1
34
31200
0,77
1,1
35
43600
1,0
1,4
35
41600
1,0
1,4
36
59700
1,6
2,3
38
56100
1,6
2,3
39
79600
2,1
3,0
39
74800
2,2
3,1
40
67600
2,3
3,2
42
208
22
35
22
277
29
35
22
416
42
42
28
554
56
42
28
624
62
54
35
832
83
54
35
832
82
54
35
1109
110
54
35
970
96
2x42
2x28
1294
128
2x54
2x35
1294
128
2x54
2x35
1725
170
2x54
2x35
2587
256
2x54
2x35
1x800
1x800
2x800
2,56 kW
6x800 8x800
8x800
8x800
188
206
334
1183
1402
m2
dm3
mm
mm
nx
Kg
3 ~ 380-480V
50/60 Hz
2x800
3x800 3x800
370
488
541
134
1025 rpm
3,9 A
4x800 4x800
6x800
635
705
821
903
1073
1x800
SERIE CBE
2x800
Horizontal
Horizontal
Vertical
Vertical
3x800
CONDENSADORES
Horizontal
Vertical
4x800
Horizontal
Vertical
135
SERIE CBE
6x800
Horizontal
Vertical
8x800
Horizontal
Vertical
136
AIR COOLED
CONDENSERS WITH
ELECTRONIC EC
AXIAL FANS
CAPACIDADES NOMINALES
ENTRE 164 Y 914 kW
NOMINAL CAPACITIES
BETWEEN 164 AND 914 kW
CARACTERSTICAS
CHARACTERISTICS
Ventiladores axiales de 800 y 910 tipo EC de conmutacin electrnica con proteccin IP-54 y para corriente trifsica desde 380 a 480V y
50/60Hz.
Control de velocidad programable mediante entrada de corriente continua 0-10V 4-20mA.
Mxima eficiencia energtica en toda la gama de revoluciones.
Regulacin de velocidad totalmente silenciosa.
Batera construida mediante una combinacin de tubo de cobre y aleta
de aluminio que proporciona un optimizado coeficiente de intercambio
trmico. La separacin de aletas es de 2,1 mm.
Sistema de batera flotante, que evita que los tubos entren en contacto
con las chapas soporte, asegurando una larga vida en ausencia de
fugas. Secciones separadas e independientes para cada ventilador.
Carrocera en acero galvanizado y lacado con resina poliester en blanco
RAL-9002 de elevada resistencia a la corrosin.
OPCIONES
OPTIONS
Three phase AC fan motors with the posibility of installing an inverter for
controlling the speed.
VC E -670
N Modelo - Model Nr.
Ventilador - Fan motor
Serie
E: Electrnico EC - Electronic EC
N: Trifsico AC normal - Three phase AC normal
S: Trifsico AC silencioso - Three phase AC silent
137
CONDENSADORES
CONDENSADORES
CON VENTILADORES
AXIALES
ELECTRNICOS EC
R-404A
800
VCE
164
MODELO
MODEL
1025 rpm
VCE
187
VCE
246
VCE
280
VCE
328
VCE
373
VCE
410
VCE
466
Capacidades - Capacities
t 15K (1)
t 10K (2)
t 07K (3)
164
187
246
280
328
373
410
466
109
76
124
87
164
115
187
131
219
153
249
174
273
191
311
218
45600
3,8
5,8
47
43700
3,9
6,0
48
68400
5,7
8,7
49
65550
5,9
9,0
50
91200
7,6
11,6
50
87400
7,9
12,0
51
114000
9,5
14,6
51
109250
9,9
15,0
52
134
149
201
224
268
299
335
373
33300
1,5
2,2
40
32000
1,6
2,3
41
49950
2,3
3,4
42
48000
2,3
3,5
43
66600
3,0
4,5
43
64000
3,1
4,6
44
83250
3,8
5,6
44
80000
3,9
5,8
45
98
106
147
159
196
213
245
266
m3/h
kW
A
dB(A)
22200
0,48
0,68
32
21300
0,50
0,72
32
33300
0,73
1,0
34
31950
0,75
1,1
34
44400
1,0
1,4
35
42600
1,0
1,4
35
55500
1,2
1,7
36
53250
1,3
1,8
36
m2
dm3
mm
mm
444
45
2x35
2x22
591
60
2x35
2x22
665
66
2x35
2x22
887
89
2x42
2x28
887
88
2x42
2x28
1183
117
2x42
2x28
1109
110
2x42
2x28
1478
146
2x54
2x35
Caractersticas - Characteristics
Nr. x Diam.
nx
2x800
2x800
3 ~ 380-480V
3x800
50/60 Hz
3x800
1025 rpm
4x800
3,9 A
2,56 kW
4x800
5x800
5x800
Kg
369
407
530
587
691
Nominal - Nominal
Aplicacin - Application
Aplicacin - Application
kW
kW
kW
m3/h
kW
A
dB(A)
750 rpm
Capacidad - Capacity
Nominal - Nominal
t 15K (1)
kW
m3/h
kW
A
dB(A)
500 rpm
Capacidad - Capacity
Nominal - Nominal
t 15K (1)
kW
138
767
852
946
SERIE VCE
CONDENSADORES
MOTOR EC 800
139
R-404A
800
VCE
294
MODELO
MODEL
1025 rpm
VCE
335
VCE
441
VCE
502
VCE
588
VCE
670
VCE
735
VCE
837
Capacidades - Capacities
t 15K (1)
t 10K (2)
t 07K (3)
294
335
441
502
588
670
735
837
196
137
223
156
294
206
335
234
392
274
446
313
490
343
558
391
86000
8,0
12,2
51
81500
8,3
12,7
52
129000
11,9
18,3
53
122250
12,4
19,0
54
172000
15,9
24,4
54
163000
16,5
25,4
55
215000
19,9
30,5
55
203750
20,7
31,7
56
242
271
363
406
484
541
605
676
62900
3,2
4,7
44
59700
3,3
4,9
45
94350
4,7
7,0
46
89550
5,0
7,4
47
125800
6,3
9,4
47
119400
6,6
9,8
48
157250
7,9
11,7
48
149250
8,3
12,3
49
179
193
269
290
358
387
448
484
m3/h
kW
A
dB(A)
41900
1,0
1,4
36
39800
1,0
1,5
36
62850
1,5
2,2
38
59700
1,6
2,3
38
83800
2,0
2,9
39
79600
2,1
3,0
39
104750
2,5
3,6
40
99500
2,6
3,8
40
m2
dm3
mm
mm
739
75
2x42
2x28
986
100
2x42
2x28
1109
111
2x54
2x35
1478
148
2x54
2x35
1478
147
2x66
2x42
1971
196
2x66
2x42
1848
183
2x66
2x42
2464
243
2x66
2x42
Caractersticas - Characteristics
Nr. x Diam.
nx
4x800
4x800
3 ~ 380-480V
6x800
50/60 Hz
6x800
1025 rpm
8x800
3,9 A
2,56 kW
8x800
10x800
10x800
Kg
726
789
1039
1134
1352
Nominal - Nominal
Aplicacin - Application
Aplicacin - Application
kW
kW
kW
m3/h
kW
A
dB(A)
750 rpm
Capacidad - Capacity
Nominal - Nominal
t 15K (1)
kW
m3/h
kW
A
dB(A)
500 rpm
Capacidad - Capacity
Nominal - Nominal
t 15K (1)
kW
140
1478
1665
1822
SERIE VCE
CONDENSADORES
MOTOR EC 800
141
R-404A
910
VCE
211
MODELO
MODEL
1000 rpm
VCE
240
VCE
316
VCE
360
VCE
422
VCE
480
VCE
527
VCE
599
Capacidades - Capacities
t 15K (1)
t 10K (2)
t 07K (3)
211
240
316
360
422
480
527
599
141
98
160
112
211
148
240
168
281
197
320
224
351
246
400
280
59700
4,8
7,4
50
57000
5,0
7,6
50
89550
7,3
11,1
52
85500
7,5
11,5
52
119400
9,7
14,8
53
114000
10,0
15,3
53
149250
12,1
18,5
54
142500
12,5
19,1
54
175
195
263
293
350
391
438
488
44500
2,2
3,0
43
42600
2,2
3,1
43
66750
3,2
4,5
45
63900
3,4
4,7
45
89000
4,3
6,0
46
85200
4,5
6,2
46
111250
5,4
7,6
47
106500
5,6
7,8
47
129
140
193
210
257
279
322
349
m3/h
kW
A
dB(A)
29700
0,75
0,92
35
28400
0,78
0,96
35
44550
1,1
1,4
37
42600
1,2
1,4
37
59400
1,5
1,8
38
56800
1,6
1,9
38
74250
1,9
2,3
39
71000
1,9
2,4
39
m2
dm3
mm
mm
554
56
2x35
2x22
739
75
2x35
2x22
832
83
2x42
2x28
1109
111
2x42
2x28
1109
110
2x54
2x35
1478
147
2x54
2x35
1386
137
2x54
2x35
1848
183
2x54
2x35
Caractersticas - Characteristics
Nr. x Diam.
nx
2x910
2x910
3 ~ 380-480V
3x910
50/60 Hz
3x910
1000 rpm
4x910
4,40 A
2,88 kW
4x910
5x910
5x910
Kg
426
474
614
685
802
Nominal - Nominal
Aplicacin - Application
Aplicacin - Application
kW
kW
kW
m3/h
kW
A
dB(A)
750 rpm
Capacidad - Capacity
Nominal - Nominal
t 15K (1)
kW
m3/h
kW
A
dB(A)
500 rpm
Capacidad - Capacity
Nominal - Nominal
t 15K (1)
kW
142
896
990
1107
SERIE VCE
CONDENSADORES
MOTOR EC 910
143
R-404A
910
VCE
401
MODELO
MODEL
1000 rpm
VCE
457
VCE
601
VCE
686
VCE
801
VCE
914
Capacidades - Capacities
t 15K (1)
t 10K (2)
t 07K (3)
401
457
601
686
801
914
267
187
305
213
401
280
457
320
534
374
609
427
116060
9,9
15,2
53
110400
10,3
15,7
53
174090
14,9
22,7
55
165600
15,4
23,6
55
232120
19,8
30,3
56
220800
20,6
31,4
56
334
374
500
560
667
747
86500
4,4
6,2
46
82400
4,6
6,4
47
129750
6,7
9,2
48
123600
6,8
9,5
49
173000
8,9
12,3
49
164800
9,1
12,7
50
247
268
370
402
493
536
m3/h
kW
A
dB(A)
57700
1,5
1,9
38
55000
1,6
2,0
38
86550
2,3
2,8
40
82500
2,4
2,9
40
115400
3,1
3,8
41
110000
3,2
3,9
41
m2
dm3
mm
mm
1016
102
2x42
2x28
1355
136
2x54
2x35
1525
151
2x66
2x42
2033
202
2x66
2x42
2033
201
2x66
2x42
2710
268
2x66
2x42
Caractersticas - Characteristics
Nr. x Diam.
nx
4x910
50/60 Hz
6x910
1000 rpm
6x910
2,88 kW
8x910
8x910
Kg
1305
1435
1705
1877
Nominal - Nominal
Aplicacin - Application
Aplicacin - Application
kW
kW
kW
m3/h
kW
A
dB(A)
750 rpm
Capacidad - Capacity
Nominal - Nominal
t 15K (1)
kW
m3/h
kW
A
dB(A)
500 rpm
Capacidad - Capacity
Nominal - Nominal
t 15K (1)
kW
906
3 ~ 380-480V
4x910
993
144
4,40 A
SERIE VCE
CONDENSADORES
MOTOR EC 910
145
CONEXIN VENTILADOR EC
CONTROLADOR EXTERIOR
EXTERNAL CONTROLLER
146
AIR COOLED
CONDENSERS WITH
ELECTRONIC EC
RADIAL FANS
CAPACIDADES NOMINALES
ENTRE 55 Y 294 kW
NOMINAL CAPACITIES
BETWEEN 55 AND 294 kW
CARACTERSTICAS
CHARACTERISTICS
Air cooled condenser to be installed in the compressors room and with the
possibility of connecting ducts to carry the air towards the outside.
Radial fan motors of high pressure and 630 EC type, electronically commutated with IP-54 protection, three phase connection from 380 to 480V
and 50/60Hz.
Programmable speed control through a DC inlet of 0-10V or 4-20mA.
Maximum energy efficiency in the whole rage of speeds.
Speed regulation totally silent.
Coil built with a combination of copper tube and aluminium fins specially
designed for condensation that provides an optimized coefficient of heat
exchange. The fin spacing is 2,1mm.
Supported to the casing by means of a floating system that avoids any
kina of contact between the copper tubes and the supporting end plate,
assuring a long life for the condenser without leaks. Finned coil sections
separated and independent for each fan.
Casing made of galvanised steel with a design of great strengh and resistance and with large lateral panels easy removable.
OPCIONES
OPTIONS
VR E -147 -1
Posicin - Position (1-5)
N Modelo - Model Nr.
Ventilador - Fan motor
E: Electrnico EC - Electronic EC
N: Trifsico AC normal - Three phase AC normal
S: Trifsico AC silencioso - Three phase AC silent
147
CONDENSADORES
CONDENSADORES
CON VENTILADORES
RADIALES
ELECTRNICOS EC
R-404A
630
VRE
55
MODELO
MODEL
VRE
63
VRE
74
VRE
109
VRE
127
VRE
147
VRE
190
VRE
221
VRE
253
VRE
294
0 Pa
55
63
74
109
127
147
190
221
253
294
14860
14700
14400
29720
29400
28800
44100
43200
58800
57600
14210
13410
61
71
106
14060
13740
28420
59
68
103
13250
12940
26820
100 Pa
123
142
28120
27480
200 Pa
118
135
26500
25880
184
213
246
284
42180
41220
56240
54960
177
203
236
271
39750
38820
53000
51760
0 Pa
52
60
69
104
119
138
179
206
239
275
13650
13500
13230
27300
27000
26460
40500
39690
54000
52920
m3/h
12940
12210
nx
kW
A
dB(A)
58
66
100
12800
12560
25880
55
63
97
12100
11830
24420
100 Pa
115
132
25600
25120
200 Pa
111
126
24200
173
198
230
264
38400
37680
51200
50240
166
189
221
252
23660
36300
35490
48400
47320
1x630
2,75
4,3
54
1x630
2,75
4,3
54
1x630
2,75
4,3
54
2x630
5,5
8,6
57
2x630
5,5
8,6
57
2x630
5,5
8,6
57
3x630
8,25
12,9
59
3x630
8,25
12,9
59
4x630
11
17,2
60
4x630
11
17,2
60
154
16
22
16
250
205
22
22
16
264
308
33
22
16
291
308
31
28
22
453
411
42
28
22
479
616
63
28
22
532
616
62
35
28
694
924
93
35
28
773
821
82
35
28
927
1232
123
35
28
1032
m2
dm3
mm
mm
Kg
t: Salto trmico - Temperature difference dB(A): Nivel sonoro a 10m sin reflexin - Sound level at 10m echo free
148
SERIE VRE
CONDENSADORES
MOTOR EC 630
149
ENFRIADORES DE LQUIDOS
LIQUID COOLERS
CARACTERSTICAS GENERALES
GENERAL CHARACTERISTICS
OPCIONES
OPTIONS
Flange connections
Possibility of vertical or horizontal placing
Complete packaging of cardboard and wood.
Fan motors wired to an external junction box.
Fan motors for 60 Hz or special
Multi-circuits for various services
Zinc copper tubes
Stainless steel tubes
Pretreated aluminium fins
Copper fins
Coil treated with polyurethane resin
Coil treated with BLYGOLD
ENFRIADORES DE LQUIDO
153
ENFRIADORES DE LQUIDOS
LIQUID COOLERS
CALCULO DE LA CAPACIDAD
CAPACITY CALCULATION
Nomenclatura utilizada
Tw1
Temperatura entrada del agua glicolada C
Tw2
Temperatura salida del agua glicolada C
Ta
Temperatura del aire ambiente C
Fn
Caudal Nominal del agua m3/h
F
Caudal de agua requerido m3/h
Pn
Prdida de carga Nominal del agua Pa
P
Prdida de carga real del agua Pa
%G
Porcentaje de glicol en el agua
Cn
Capacidad Nominal del enfriador kW
C
Capacidad Requerida del enfriador kW
Fc
Factor de correccin
Fg
Factor del glicol
Word list
Tw1
Tw2
Ta
Fn
F
Pn
P
%G
Cn
C
Fc
Fg
Capacidad Nominal Cn
La capacidad nominal Cn del catlogo es la proporcionada por los
enfriadores para agua glicolada en las siguientes condiciones:
Nominal capacity Cn
The liquid coolers provide the Nominal capacities Cn in the catalogues with the following working conditions:
Tw1=+40C
Tw1=+40C
Tw2=+35C
Ta=+25C
%G=30
Tw2=+35C
Ta=+25C
%G=30
Para agua glicolada en otras condiciones de trabajo, puede seleccionar el enfriador siguiendo el ejemplo explicado a continuacin.
Si el lquido a utilizar es otro diferente de agua glicolada, para realizar los clculos de seleccin consulte nuestra Oficina Tcnica.
En nuestro sitio Web www.frimetal.es hay un programa de descarga libre y gratuita que permite una rpida y precisa seleccin de
un enfriador de lquido de nuestros catlogos a partir de las condiciones de trabajo dadas.
SELECCIN DE UN ENFRIADOR
Ejemplo de seleccin
Selection example
En este caso:
In the example:
2) Factor de correccin Fc
2) Correction factor Fc
Fc= 25/(Tw1+Tw2-2xTa)
Fc= 25/(Tw1+Tw2-2xTa)
En el ejemplo se tiene:
In the example:
Fc = 25/(53+45-2x32)=25/34=0,74
Fc = 25/(53+45-2x32)=25/34=0,74
154
3) Glycol factor Fg
It depends on the glycol percentage as follows:
%G
0%
10%
20%
25%
30%
35%
40%
45%
Fg
0,93
0,94
0,96
0,98
1,00
1,02
1,05
1,07
ENFRIADORES DE LQUIDOS
En el ejemplo:
LIQUID COOLERS
In the example
Cn = C x Fc x Fg
Cn = C x Fc x Fg
En el ejemplo:
In the example:
Modelo
Capacidad Cn
dB(A) a 10 m
ALN-210
158,9 kW
65
ALN-185
147 kW
ALN-247Y
Model
Capacity Cn
dB(A) a 10 m
ALN-210
158,9 kW
65
58
ALN-185
147 kW
58
159 kW
52
ALN-247Y
159 kW
52
VLN-231Y
142,8 kW
51
VLN-231Y
142,8 kW
51
ALS-195
143 kW
43
ALS-195
143 kW
43
VLS-223
156 kW
43
VLS-223
156 kW
43
ALS-243Y
139 kW
38
ALS-243Y
139 kW
38
VLS-267Y
151 Kw
38
VLS-267Y
151 Kw
38
VLS-262Y
145 kW
38
VLS-262Y
145 kW
38
This selection list is arranged according to sound level. The customer must choose among these options having in mind the required
sound level, the dimensions available in facility, the Capacity and
the price of each unit.
If model ALN-210 is selected, then (see data sheet on the catalogue): Fn=29,9 m3/h and Pn=62 kPa
F/Fn
ENFRIADORES DE LQUIDO
0,50 0,60 0,70 0,80 0,90 1,00 1,20 1,40 1,60 1,80 2,00
P/Pn 0,25 0,36 0,49 0,64 0,81 1,00 1,44 1,96 2,56 3,24 4,00
Se tiene aproximadamente:
p/pn = 0,6
Por lo tanto:
p/pn = 0,6
Thus:
p = 0,6 x 62 = 37 kPa
p = 0,6 x 62 = 37 kPa
If p is less than 20 kPa or greater than 120 kPa, a different circuiting on the selected unit might be necessary. Consult our Technical
Department for further information.
155
ENFRIADORES DE LQUIDOS
LIQUID COOLERS
NIVEL SONORO
SOUND LEVEL
En catlogo se indica la presin sonora dB(A) de los enfriadores en condiciones de campo abierto y plano perfectamente reflectante, sobre
paredes paraleleppedas a una distancia de 10 m, conforme a la norma
EN 13487. Este dato es slo utilizable para efectos comparativos.
En la prctica, para condiciones acsticas medias se aconseja
aumentar en 4 dB(A) los datos indicados en catlogo.
Para otras distancias, el nivel sonoro se calcula aplicando a los
datos del catlogo la correccin del grfico GR1.
Si hay varias unidades enfriadoras, con el grfico GR2 se calcula
el incremento del nivel sonoro total en funcin de su nmero.
GR-1
GR-1
GR-2
EJEMPLO - EXAMPLE
dB(A)?
2 x ALN-274
a 20 m.
CATALOGO
ALN-274
=> 52 dB(A)
dB(A)
52 - 6 + 3 = 49
20 m => -6dB(A)
GR-1
The electrical consumption and power input data of the fan motors
shown on the catalogue refer to an ambient temperature of
+20C. It is necessary to have in mind that at low temperatures
both the consumption and power input increase about a 16% for
air temperatures of -20C and a 25% for temperatures of -40C.
This must be taken into account by the installer at the moment of
calculating the elements of the electric panel of he cold installation.
156
CAPACIDADES NOMINALES
ENTRE 34,5 Y 548 kW
CARACTERSTICAS
CHARACTERISTICS
Enfriadores de lquido por aire con ventiladores axiales de 630 y 800 mm.
Serie ALN (normales)
Conexin :1.300 rpm (900 rpm modelos 800)
Conexin :1.000 rpm (680 rpm modelos 800)
Serie ALS (silenciosos)
Conexin : 680 rpm (450 rpm modelos 800)
Conexin : 550 rpm (350 rpm modelos 800)
Batera construida mediante una combinacin de tubo de cobre y aleta
de aluminio que proporciona un optimizado coeficiente de intercambio
trmico. La separacin de aletas es de 2,1 mm.
Sistema de batera flotante, que evita que los tubos entren en contacto
con las chapas soporte, asegurando una larga vida en ausencia de
fugas. Secciones separadas e independientes para cada ventilador.
Carrocera en acero galvanizado y lacado con resina poliester en blanco
RAL-9002 de elevada resistencia a la corrosin.
Ventiladores helicoidales con motor de rotor externo, trifsicos 400V
50Hz y dos velocidades. Con proteccin IP-54 y protector trmico
(Termocontacto).
Dry coolers with axial fans of diameter 630 and 800 mm.
Serie ALN (Normal)
Connection :1.300 rpm (900 rpm models with 800)
Connection :1.000 rpm (680 rpm models with 800)
Serie ALS (Silent)
Connection : 680 rpm (450 rpm models with 800)
Connection : 550 rpm (350 rpm models wtih 800)
Coil built with a combination of copper tube and aluminium fins specially
designed for condensation that provides an optimized coefficient of heat
exchange. The fin spacing is 2,1 mm.
Supported to the casing by means of a "floating" system that avoids any
kind of contact between the copper tubes and the supporting end plates,
assuring a long life for the condenser without leaks. Finned coil sections
separated and independent for each fan.
Casing made of galvanized steel painted in a corrosion resistant white
polyester RAL-9002.
External rotor axial fans, three phase motors 400V 50Hz two speed.
Protection IP-54 and with thermal protection (Thermocontact).
OPCIONES
OPTIONS
AL N -506 H
Conexin - Connection : Tringulo - Delta
Y: Estrella - Star
Posicin - Position
N Modelo - Model Nr.
V: Vertical - Vertical
H: Horizontal - Horizontal
157
ENFRIADORES DE LQUIDO
NOMINAL CAPACITIES
BETWEEN 34,5 AND 548 kW
630
ALN
94
ALN
107
ALN
121
ALN
140
ALN
160
ALN
181
ALN
210
ALN
230
67,4
78,5
94,6
102,7
119,4
142,2
158,9
184,5
56,5
65,0
77,3
85,8
98,7
116,2
132,3
156,4
m3/h
28000
27000
25500
42000
40500
38250
51600
49200
21800
21000
20000
32700
31500
30000
40500
39200
m3/h
12,7
14,8
17,8
19,3
22,4
26,7
29,9
34,7
10,6
12,2
14,5
16,1
18,6
21,8
24,9
29,4
47
37
76
64
51
74
62
38
34
26
53
46
36
51
43
64
2x630
2x630
2x630
3x630
3x630
3x630
4x630
4x630
62
62
62
64
64
64
65
65
57
118
17,4
66
197
57
157
23,1
66
214
57
236
34,7
66
248
59
177
25,6
79
285
59
236
34,2
79
312
59
354
51,3
79
363
60
513
51,1
79
465
60
770
76,6
105
563
MODELO
MODEL
Cn(1)
kW
Fn
Pn
kPa
dB(A)
m2
dm3
mm
kg
630
Silenciosos - Silent
ALS
51
ALS
58
ALS
61
ALS
77
ALS
86
ALS
92
ALS
113
ALS
120
46,2
55,0
61,3
72,5
82,2
92,0
108
114
40,0
44,3
48,5
60,0
66,3
73,1
86
91
m3/h
18000
17100
15700
27000
25650
23550
30900
27350
13820
12900
11620
20730
19350
17430
22850
20300
m3/h
8,5
10,1
11,3
13,4
15,2
16,9
19,9
21,1
7,4
8,2
8,9
11,1
12,2
13,5
15,9
16,7
kPa
30
81
45
95
72
43
86
48
72
55
66
68
49
88
58
96
2x630
2x630
2x630
3x630
3x630
3x630
4x630
4x630
45
45
45
47
47
47
48
48
39
118
17,4
54
181
39
157
23,1
54
198
39
236
34,7
54
232
41
177
25,6
66
261
41
236
34,2
66
288
41
354
51,3
66
339
42
513
51,1
66
432
42
770
76,6
79
482
MODELO
MODEL
Cn(1)
kW
Fn
Pn
dB(A)
m2
dm3
mm
kg
(1) Cn: Capacidad con - Capacity with Tw1=40C Tw2=35C Ta=+25C Glicol=30%
dB(A) a 10m sin reflexin - dB(A) at 10m echo free
158
SERIE AL
2x630
- Horizontal
- Vertical
3x630
H
4x630
ENFRIADORES DE LQUIDO
159
800
ALN ALN ALN ALN ALN ALN ALN ALN ALN ALN ALN ALN ALN
123 137 185 206 247 274 309 343 380 424 506 566 638
MODELO
MODEL
Cn(1)
kW
m3/h
97
109
147
80
38400
92
36200
121
57600
166
138
159
54300 76800
192
218
183
205
72400 96000
247
279
225
257
283
338
90500 118800 111600 158400
296
351
410
463
548
29200
27000
43800
40500
58400
54000
73000
67500
90000
83400 120000
18,1
20,5
27,6
31,2
36,1
41,0
46,4
52,5
55,6
65,9
77,1
87,0 103,0
15,0
17,2
22,8
25,9
29,9
34,4
38,5
42,3
48,3
53,2
63,4
70,0
82,0
46
31
58
43
39
29
74
55
33
81
78
55
110
32
72
41
69
27
65
54
37
77
56
54
37
73
2x800
2x800
3x800
3x800 4x800
4x800
5x800
5x800
6x800
51
51
53
53
54
54
55
55
56
45
277
28,1
79
307
45
370
37,4
79
341
47
416
41,5
79
449
47
554
55,4
79
500
48
554
55,0
105
589
48
739
73,3
105
659
49
693
68,5
105
749
49
924
91,3
105
818
50
866
86,0
2x79
915
372
436
148800 140800
111200 107200
Fn
Pn
m3/h
kPa
dB(A)
m2
dm3
mm
kg
800
MODELO
MODEL
6x800 8x800
56
57
8x800 8x800
57
57
50
51
1155 1155
115
114
2x79 2x105
1024 1208
51
51
1540 2310
152
228
2x105 2x105
1351 1639
ALS ALS
324 350
Silenciosos - Silent
ALS
73
ALS
78
ALS
110
ALS
117
ALS
146
ALS ALS
156 183
ALS
195
ALS
226
ALS
243
ALS
301
53
56
79
84
105
42
15890
45
14700
63
23835
68
86
22050 31780
129
143
161
176
212
90
107
29400 39725
113
36750
129
48660
139
176
45150 64880
185
187
60200 53550
11780
10930
17670
16395
23560
21860
29450
27325
36060
33540
48080
44720
40040
9,7
10,4
14,6
15,6
19,4
7,8
8,3
11,7
12,6
15,9
20,7
23,8
26,4
29,7
32,5
39,1
43,4
44,1
16,7
19,8
20,7
23,8
25,5
32,5
34,1
56
38
58
37
34,4
53
36
31
68
43
68
31
68
38
58
39
78
34
89
54
68
45
29
44
66
45
50
2x800
2x800
3x800
39
39
41
3x800 4x800
41
42
4x800
5x800
5x800
6x800
42
43
43
44
44
45
45
45
33
277
28,1
54
296
33
370
37,4
54
330
35
416
41,5
66
432
35
554
55,4
66
488
36
554
55,0
79
567
36
739
73,3
79
636
37
693
68,5
79
704
37
924
91,3
79
790
38
866
86,0
2x66
881
38
1155
115
2x66
990
39
1155
114
2x79
1163
39
1540
152
2x79
1306
39
2310
228
2x79
1593
Cn(1)
kW
m3/h
113
235
240
Fn
Pn
m3/h
kPa
dB(A)
m2
dm3
mm
kg
(1) Cn: Capacidad con - Capacity with Tw1=40C Tw2=35C Ta=+25C Glicol=30%
dB(A) a 10m sin reflexin - dB(A) at 10m echo free
160
6x800 8x800
8x800 8x800
SERIE AL
2x800
H
- Horizontal
- Vertical
3x800
H
4x800
H
ENFRIADORES DE LQUIDO
5x800
H
161
SERIE AL
6x800
H
- Horizontal
- Vertical
8x800
162
CAPACIDADES NOMINALES
ENTRE 57,4 Y 706 kW
NOMINAL CAPACITIES
BETWEEN 57,4 AND 706 kW
CARACTERSTICAS
CHARACTERISTICS
Dry coolers with axial fans of 800 mm. and coils forming a V.
Serie VLN (Normal)
Connection : 900 rpm
Connection : 680 rpm
Serie VLS (Silent)
Connection : 450 rpm
Connection : 350 rpm
Coil built with a combination of copper tube and aluminium fins specially
designed for condensation that provides an optimized coefficient of heat
exchange. The fin spacing is 2,1 mm.
Supported to the casing by means of a "floating" system that avoids any
kind of contact between the copper tubes and the supporting end plates,
assuring a long life for the condenser without leaks. Finned coil sections
separated and independent for each fan.
Casing made of galvanized steel painted in a corrosion resistant white
polyester RAL-9002.
External rotor axial fans, three phase motors 400V 50Hz two speed.
Protection IP-54 and with thermal protection (Thermocontact).
OPCIONES
VL N -463
Conexin - Connection : Tringulo - Delta
Y: Estrella - Star
N Modelo - Model Nr.
Nivel sonoro - Level sound N: Normal - Normal
S: Silencioso - Silent
Serie modelo - Model serie
163
ENFRIADORES DE LQUIDO
OPTIONS
800
MODELO
MODEL
VLN
154
VLN
172
VLN
231
VLN
258
VLN
307
VLN
344
VLN
385
VLN
430
VLN
461
VLN
515
114
132
172
197
229
263
280
336
344
396
95
43600
107
42000
143
65400
161
63000
190
87200
220
84000
243
109000
274
105000
285
130800
333
126000
33400
32000
50100
48000
66800
64000
83500
80000
100200
96000
21,5
24,7
32,3
37,1
43,0
49,5
52,6
63,2
64,6
74,4
17,9
20,2
26,8
30,3
35,8
41,4
45,7
51,5
53,6
62,5
66
50
62
47
60
46
34
87
58
45
47
35
44
33
43
74
82
60
41
99
2x800
2x800
3x800
3x800
4x800
4x800
5x800
5x800
6x800
6x800
51
51
53
53
54
54
55
55
56
56
45
370
37,7
2x54
342
45
493
50,3
2x54
388
47
554
55,7
2x66
495
47
739
74,2
2x66
571
48
739
73,6
2x79
658
48
986
98,2
2x79
760
49
924
91,6
2x79
811
49
1232
122
2x105
938
50
1109
110
2x105
974
50
1478
146
2x105
1127
VLS
267
VLS
286
Cn(1)
kW
m3/h
Fn
Pn
m3/h
kPa
dB(A)
m2
dm3
mm
kg
800
MODELO
MODEL
Silenciosos - Silent
VLS
89
VLS
95
VLS
134
VLS
143
VLS
178
VLS
191
VLS
223
VLS
239
63
68
95
102
126
135
156
171
190
204
50
18000
53
17000
76
27000
80
25500
100
36000
108
34000
127
45000
134
42500
151
54000
162
51000
13300
12600
19950
18900
26600
25200
33250
31500
39900
37800
11,6
12,5
17,6
18,8
23,2
24,9
28,8
31,6
35,1
37,6
9,2
9,7
13,9
14,7
18,4
19,9
23,3
24,6
27,8
29,8
63
43
86
58
59
41
48
76
82
56
42
28
57
38
39
84
74
49
54
82
2x800
2x800
3x800
3x800
4x800
4x800
5x800
5x800
6x800
6x800
39
39
41
41
42
42
43
43
44
44
33
370
37,7
2x42
332
33
493
50,3
2x42
377
35
554
55,7
2x54
480
35
739
74,2
2x54
556
36
739
73,6
2x66
638
36
986
98,2
2x66
740
37
924
91,6
2x66
785
37
1232
122
2x66
913
38
1109
110
2x79
944
38
1478
146
2x79
1097
Cn(1)
kW
m3/h
Fn
Pn
m3/h
kPa
dB(A)
m2
dm3
mm
kg
(1) Cn: Capacidad con - Capacity with Tw1=40C Tw2=35C Ta=+25C Glicol=30%
dB(A) a 10m sin reflexin - dB(A) at 10m echo free
164
ENFRIADORES DE LQUIDO
SERIE VL
800
165
800
MODELO
MODEL
VLN
276
VLN
308
VLN
413
VLN
463
VLN
551
VLN
617
VLN
689
VLN
771
VLN
827
VLN
925
205
236
308
353
410
471
500
602
615
706
171
80800
194
77200
257
121200
291
115800
342
161600
398
154400
438
202000
495
193000
513
242400
581
231600
62000
59200
93000
88800
124000
118400
155000
148000
186000
177600
38,5
44,4
57,8
66,4
77,0
88,5
94,0
113,2
115,6
132,7
32,1
36,5
48,2
54,6
64,3
74,8
82,3
93,0
96,4
109,2
75
62
71
54
68
53
38
101
66
50
54
43
51
38
49
86
94
71
47
35
4x800
4x800
6x800
6x800
8x800
8x800
10x800
10x800
12x800
12x800
54
54
56
56
57
57
58
58
59
59
48
616
62,8
2x66
720
48
821
83,8
2x79
770
50
924
92,8
2x79
1020
50
1232
124
2x105
1100
51
1232
123
2x105
1330
51
1643
164
2x105
1430
52
1540
153
2x105
1630
52
2053
203
2x105
1760
53
1848
183
2x105
1930
53
2464
243
4x105
2090
VLS
487
VLS
523
Cn(1)
kW
m3/h
Fn
Pn
m3/h
kPa
dB(A)
m2
dm3
mm
kg
800
MODELO
MODEL
Silenciosos - Silent
VLS
162
VLS
174
VLS
244
VLS
262
VLS
325
VLS
349
VLS
406
VLS
436
114
122
172
184
227
243
282
309
343
368
91
33400
97
31200
137
50100
145
46800
181
66800
191
62400
225
83500
242
78000
273
100200
289
93600
24700
23200
37050
34800
49400
46400
61750
58000
74100
69600
20,9
22,4
31,7
34,0
41,8
44,8
52,0
56,9
63,3
67,8
16,7
17,9
25,4
26,7
33,4
35,2
41,5
44,6
50,5
53,2
73
50
99
72
68
46
56
87
94
65
49
62
66
47
47
30
37
57
63
42
4x800
4x800
6x800
6x800
8x800
8x800
10x800
10x800
12x800
12x800
42
42
44
44
45
45
46
46
47
47
36
616
62,8
2x54
700
36
821
83,8
2x54
750
38
924
92,8
2x66
990
38
1232
124
2x79
1070
39
1232
123
2x79
1290
39
1643
164
2x79
1390
40
1540
153
2x105
1580
40
2053
203
2x105
1710
41
1848
183
2x105
1870
41
2464
243
2x105
2030
Cn(1)
kW
m3/h
Fn
Pn
m3/h
kPa
dB(A)
m2
dm3
mm
kg
(1) Cn: Capacidad con - Capacity with Tw1=40C Tw2=35C Ta=+25C Glicol=30%
dB(A) a 10m sin reflexin - dB(A) at 10m echo free
166
ENFRIADORES DE LQUIDO
SERIE VL
800
167
ENFRIADORES DE LQUIDO
ventiladores EC
LIQUID COOLERS
EC fan motor
ENFRIADORES DE LQUIDOS
LIQUID COOLERS
CARACTERSTICAS GENERALES
GENERAL CHARACTERISTICS
FRIMETAL manufactures the series ALE with frameworks in classic cubic type and the series VLE with V-shaped coils. Both series
have a great variety of models covering a wide range of capacities. The liquid to be cooled is in general water or glycol water
used for condensation in refrigeration and air conditioning but
it is also possible to use these units for the cooling of refrigerant
compressors as well as other fluids that can be used in all kinds
of industrial processes.
Both series incorporate axial fan motors electronically commutated of
800 (ALE series) and 800 and 910 fan motors (VLE series).
The coils are built of an effective combination of copper tube and
corrugated aluminum fins that provides a high coefficient of thermal exchange. They are held to the framework by means of a special floating coil system that avoids any kind of contact between
the tubes and the supporting end plates, providing a lifelong use
for the liquid coolers without leaks.
The casings are made of galvanized steel coated with an RAL-9002
white polyurethane resin of high structural strength and corrosion
resistance.
All the liquid coolers manufactured by FRIMETAL comply with applicable Machine Directive 2006/42/EC and Low Voltage Directive
2006/95/EC.
VENTILADORES EC
EC FAN MOTORS
Son ventiladores que se conectan a la corriente de lnea alterna trifsica AC aunque internamente los motores funcionan con corriente continua DC con conmutacin electrnica (sin escobillas).
Llevan integrado un control electrnico que cumple la triple funcin
de convertir la corriente AC en DC, de realizar la conmutacin y de
controlar la velocidad del ventilador.
Las ventajas de estos ventiladores son:
Valen para todo tipo de lneas elctricas ya que funcionan con
corriente trifsica de 50 o 60Hz y con tensiones de 380 a 480V.
Tienen una eficiencia superior a los ventiladores convencionales AC
en cualquier rgimen de giro, especialmente a bajas velocidades.
Al llevar integrado un sistema de control de la velocidad programable, la regulacin es mucho ms sencilla que con un ventilador trifsico tipo AC controlado mediante un variador de frecuencia aadido al condensador o colocado en la sala de control.
La regulacin de velocidad es totalmente silenciosa, al contrario
de lo que ocurre con los ventiladores AC, cuyos sistemas de regulacin producen ruido.
These fan motors use the standard three phase AC mains supply
but internally run with DC voltage and are electronically commutated (brushless).
They incorporate integrated electronics that fulfil the triple function
of converting AC current into DC, perform the commutation and
control the fan speed.
The benefits of the EC fan motors are:
Can be operated with all kinds of electric mains since the working
range is 380 to 480V three phase 50/60Hz.
They are more efficient than standard AC motors in the whole
range but specially at low speed.
As they have an integrated control that can be programmed, the
speed regulation is much more simple than with three phase AC
fan motors that are controlled by an inverter that must be added
to the condensing unit or placed in the control room.
The speed control is totally silent, contrary to what happens with
AC fan motors, whose speed control systems are noisy.
Sistema de regulacin
Speed control
170
ENFRIADORES DE LQUIDOS
LIQUID COOLERS
CALCULO DE LA CAPACIDAD
CAPACITY CALCULATION
Nomenclatura utilizada
Tw1
Temperatura entrada del agua glicolada C
Tw2
Temperatura salida del agua glicolada C
Ta
Temperatura del aire ambiente C
%G
Porcentaje de glicol en el agua
Cn
Capacidad Nominal del enfriador kW
C
Capacidad Requerida del enfriador kW
t
Salto trmico (Tw1+Tw2)/2-Ta
Word list
Tw1
Tw2
Ta
%G
Cn
C
t
Capacidad Nonimal
En las tablas de datos se especifica la Capacidad Nominal para
Tw1=+40C, Tw2=+35C, Ta=+30C y %G=30 y con los ventiladores girando a su mxima velocidad (1025 rpm).
Tambin se dan las Capacidades Nominales, caudal y prdida de
carga del glicol, caudal de aire, consumo, potencia absorbida y
nivel sonoro en velocidades intermedias de 750 y 500rpm para los
casos en que el enfriador requiera un nivel sonoro muy bajo que
obligue a limitar la velocidad de rotacin de los ventiladores.
La limitacin de la velocidad de giro de los ventiladores se puede
realizar directamente por programacin o modificando la banda
de entrada 0-10V. Por ejemplo para limitar a 750 rpm (ver grfico
pg. anterior), la banda de regulacin quedar de 0-7,5V.
Nominal Capacity
In the data sheets it is specified the Nominal Capacity for
Tw1=+40C, Tw2=+35C, Ta=+30C and %G=30 with the fan
motors running at full speed (1025 rpm).
Nominal Capacities, water glycol flow and drop pressure, air flow,
electric consumption, power input and sound pressure level are
also given for intermediate fan motors speeds of 750 and 500 rpm
to help for the selection of the unit when a low sound level is required and therefore the fan motor speed must be limited.
The limitation of the fan motor speed can be made directly from the
control program or by modifying the input range 0-10V. For example, to set a limit of 750rpm (see graphic in previous page), the
input range must be 0-7,5V.
171
ENFRIADORES DE LQUIDO
ENFRIADORES DE LQUIDOS
LIQUID COOLERS
NIVEL SONORO
SOUND LEVEL
En catlogo se indica la presin sonora dB(A) de los enfriadores de lquido en condiciones de campo abierto y plano perfectamente reflectante,
sobre paredes paraleleppedas a una distancia de 10 m, conforme a la
norma EN 13487. Este dato es slo utilizable para efectos comparativos.
En la prctica, para condiciones acsticas medias se aconseja
aumentar en 4 dB(A) los datos indicados en catlogo.
Para otras distancias, el nivel sonoro se calcula aplicando a los
datos del catlogo la correccin del grfico GR1.
Si hay varias unidades, con el grfico GR2 se calcula el incremento
del nivel sonoro total en funcin de su nmero.
GR-1
GR-1
GR-2
EJEMPLO - EXAMPLE
dB(A)?
2 x ALE-259 1025 rpm
a 20 m.
CATALOGO
ALE-259 => 50 dB(A)
dB(A)
50 - 6 + 3 = 47
20 m => -6dB(A)
GR-1
The electrical consumption and power input data of the fan motors
shown on the catalogue refer to an ambient temperature of
+20C. It is necessary to have in mind that at low temperatures
both the consumption and power input increase about a 16% for
air temperatures of -20C and a 25% for temperatures of -40C.
This must be taken into account by the installer at the moment of
calculating the elements of the electric panel of he cold installation.
172
LIQUID COOLERS
WITH
ELECTRONIC EC
AXIAL FANS
CAPACIDADES NOMINALES
ENTRE 34 Y 340 kW
NOMINAL CAPACITIES
BETWEEN 34 AND 340 kW
CARACTERSTICAS
CHARACTERISTICS
OPCIONES
OPTIONS
Three phase AC fan motors with the posibility of installing an inverter for
controlling the speed.
AL E -443 H
Posicin - Position
N Modelo - Model Nr.
Ventilador - Fan motor
Serie
V: Vertical - Vertical
H: Horizontal - Horizontal
E: Electrnico EC - Electronic EC
N: Trifsico AC normal - Three phase AC normal
S: Trifsico AC silencioso - Three phase AC silent
173
ENFRIADORES DE LQUIDO
ENFRIADORES DE LQUIDO
CON VENTILADORES
AXIALES
ELECTRNICOS EC
Glicol
800
ALE
77
MODELO
MODEL
Cn (1)
kW
ALE
87
1025 rpm
34
39
ALE
152
ALE
173
ALE
228
ALE
259
ALE
304
ALE
345
ALE
389
ALE
443
ALE
518
ALE
591
ALE
661
160
173
199
225
271
340
29,2
93
32,0
63
36,4
47
37,4
110
48,6
105
63,0
81
m3/h
kPa
6,3
61
7,2
47
12,5
55
14,4
42
18,8
54
21,6
41
23,6
106
m3/h 22400
1,9
kW
3,0
A
44
dB(A)
21350
2,0
3,1
45
44800
3,8
5,9
47
42700
4,0
6,1
48
67200
5,8
8,9
49
64050
6,0
9,2
50
89600
7,7
11,8
50
750 rpm
28
32
55
64
83
98
114
129
143
162
195
223
248
30,1
34
35,6
101
41,4
79
46,1
46
Cn (1)
kW
85400 122400
8,0
12,4
12,2
19,0
51
54
m3/h
kPa
5,1
43
5,9
74
10,3
39
11,9
67
15,3
37
18,0
92
20,9
85
23,8
64
26,3
44
m3/h 16400
0,76
kW
1,1
A
38
dB(A)
15600
0,80
1,2
38
32800
1,5
2,3
41
31200
1,6
2,4
41
49200
2,3
3,4
43
46800
2,4
3,5
43
65600
3,1
4,5
44
62400
3,2
4,7
44
89550
5,0
7,4
47
500 rpm
22
24
43
48
65
72
86
96
113
126
150
166
183
Cn (1)
kW
m3/h
kPa
4,0
86
4,4
44
8,0
62
8,9
40
12,1
76
13,4
54
16,0
53
17,7
38
20,5
89
23,4
74
27,8
64
30,8
46
33,9
83
m3/h 10900
0,25
kW
0,35
A
29
dB(A)
10400
0,26
0,36
30
21800
0,49
0,70
32
20800
0,51
0,72
33
32700
0,74
1,1
34
31200
0,77
1,1
35
43600
1,0
1,4
35
41600
1,0
1,4
36
59700
1,6
2,3
38
56100
1,6
2,3
39
79600
2,1
3,0
39
74800
2,2
3,1
40
67600
2,3
3,2
42
208
22
54
277
29
54
416
42
66
554
56
66
624
62
79
832
83
79
832
82
79
1109
110
105
970
96
2x66
1294
128
2x79
1294
128
2x79
1725
170
2x79
2587
256
2x105
1x800
1x800
2x800
2,56 kW
6x800 8x800
8x800
8x800
203
221
354
1230
1467
m2
dm3
mm
nx
Kg
3 ~ 380-480V
50/60 Hz
2x800
3x800 3x800
389
514
567
dB(A): Nivel sonoro a 10m sin reflexin - Sound level at 10m echo free
(1) Cn: Capacidad con - Capacity with Tw1=+40C, Tw2=+35C, Ta=+30C, Glicol 30%
174
1025 rpm
3,9 A
4x800 4x800
6x800
660
742
857
950
1120
1x800
SERIE ALE
2x800
Horizontal
Horizontal
Vertical
Vertical
3x800
Horizontal
Vertical
ENFRIADORES DE LQUIDO
4x800
Horizontal
Vertical
175
SERIE ALE
6x800
Horizontal
Vertical
8x800
Horizontal
Vertical
176
LIQUID COOLERS
WITH
ELECTRONIC EC
AXIAL FANS
CAPACIDADES NOMINALES
ENTRE 70 Y 405 kW
NOMINAL CAPACITIES
BETWEEN 70 AND 405 kW
CARACTERSTICAS
CHARACTERISTICS
Ventiladores axiales de 800 y 910 tipo EC de conmutacin electrnica con proteccin IP-54 y para corriente trifsica desde 380 a 480V y
50/60Hz.
Control de velocidad programable mediante entrada de corriente continua 0-10V 4-20mA.
Mxima eficiencia energtica en toda la gama de revoluciones.
Regulacin de velocidad totalmente silenciosa.
Batera construida mediante una combinacin de tubo de cobre y aleta
de aluminio que proporciona un optimizado coeficiente de intercambio
trmico. La separacin de aletas es de 2,1 mm.
Sistema de batera flotante, que evita que los tubos entren en contacto
con las chapas soporte, asegurando una larga vida en ausencia de
fugas. Secciones separadas e independientes para cada ventilador.
Carrocera en acero galvanizado y lacado con resina poliester en blanco
RAL-9002 de elevada resistencia a la corrosin.
OPCIONES
OPTIONS
Three phase AC fan motors with the posibility of installing an inverter for
controlling the speed.
VL E -670
N Modelo - Model Nr.
Ventilador - Fan motor
Serie
E: Electrnico EC - Electronic EC
N: Trifsico AC normal - Three phase AC normal
S: Trifsico AC silencioso - Three phase AC silent
177
ENFRIADORES DE LQUIDO
ENFRIADORES DE LQUIDO
CON VENTILADORES
AXIALES
ELECTRNICOS EC
Glicol
800
VLE
164
MODELO
MODEL
Cn (1)
1025 rpm
70
kW
VLE
187
VLE
246
VLE
280
VLE
328
VLE
373
VLE
410
VLE
466
141
162
176
207
m3/h
kPa
13,0
64
15,1
51
19,4
86
22,7
687
25,9
60
29,5
48
31,0
103
37,8
88
m3/h
kW
A
dB(A)
45600
3,8
5,8
47
43700
3,9
6,0
48
68400
5,7
8,7
49
65550
5,9
9,0
50
91200
7,6
11,6
50
87400
7,9
12,0
51
114000
9,5
14,6
51
109250
9,9
15,0
52
750 rpm
66
87
100
115
131
147
168
Capadidad - Capacity
Cn (1)
58
kW
m3/h
kPa
10,7
46
12,1
34
16,0
61
18,5
47
21,4
43
24,4
32
27,4
83
31,1
62
m3/h
kW
A
dB(A)
33300
1,5
2,2
40
32000
1,6
2,3
41
49950
2,3
3,4
42
48000
2,3
3,5
43
66600
3,0
4,5
43
64000
3,1
4,6
44
83250
3,8
5,6
44
80000
3,9
5,8
45
500 rpm
50
68
75
90
100
111
124
Capadidad - Capacity
Cn (1)
45
kW
m3/h
kPa
8,4
91
9,3
66
12,5
88
13,9
63
16,7
85
18,6
62
20,6
50
23,0
36
m3/h
kW
A
dB(A)
22200
0,48
0,68
32
21300
0,50
0,72
32
33300
0,73
1,0
34
31950
0,75
1,1
34
44400
1,0
1,4
35
42600
1,0
1,4
35
55500
1,2
1,7
36
53250
1,3
1,8
36
m2
dm3
mm
444
45
2x54
591
60
2x54
665
66
2x66
887
89
2x66
887
88
2x66
1183
117
2x66
1109
110
2x66
1478
146
2x79
Caractersticas - Characteristics
Nr. x Diam.
nx
2x800
2x800
3 ~ 380-480V
3x800
50/60 Hz
3x800
1025 rpm
4x800
3,9 A
2,56 kW
4x800
5x800
5x800
Kg
396
434
565
621
725
dB(A): Nivel sonoro a 10m sin reflexin - Sound level at 10m echo free
(1) Cn: Capacidad con - Capacity with Tw1=+40C, Tw2=+35C, Ta=+30C, Glicol 30%
178
801
886
990
SERIE VLE
ENFRIADORES DE LQUIDO
MOTOR EC 800
179
Glicol
800
VLE
294
MODELO
MODEL
Cn (1)
1025 rpm
127
kW
VLE
335
VLE
441
VLE
502
VLE
588
VLE
670
VLE
735
VLE
837
253
293
318
373
m3/h
kPa
23,4
74
27,0
57
34,9
99
40,7
82
46,8
70
54,0
54
56,2
109
68,0
101
m3/h
kW
A
dB(A)
86000
8,0
12,2
51
81500
8,3
12,7
52
129000
11,9
18,3
53
122250
12,4
19,0
54
172000
15,9
24,4
54
163000
16,5
25,4
55
215000
19,9
30,5
55
203750
20,7
31,7
56
750 rpm
121
158
180
209
237
267
303
Capadidad - Capacity
Cn (1)
104
kW
m3/h
kPa
19,4
53
22,5
77
29,4
72
33,5
59
38,8
50
44,1
37
49,5
96
56,2
72
m3/h
kW
A
dB(A)
62900
3,2
4,7
44
59700
3,3
4,9
45
94350
4,7
7,0
46
89550
5,0
7,4
47
125800
6,3
9,4
47
119400
6,6
9,8
48
157250
7,9
11,7
48
149250
8,3
12,3
49
500 rpm
90
120
136
159
182
202
224
Capadidad - Capacity
Cn (1)
81
kW
m3/h
kPa
15,0
63
16,7
45
22,4
44
25,3
74
29,5
30
33,8
78
37,4
58
41,6
42
m3/h
kW
A
dB(A)
41900
1,0
1,4
36
39800
1,0
1,5
36
62850
1,5
2,2
38
59700
1,6
2,3
38
83800
2,0
2,9
39
79600
2,1
3,0
39
104750
2,5
3,6
40
99500
2,6
3,8
40
m2
dm3
mm
739
75
2x66
986
100
2x66
1109
111
2x79
1478
148
2x79
1478
147
2x79
1971
196
2x105
1848
183
2x105
2464
243
2x105
Caractersticas - Characteristics
Nr. x Diam.
nx
4x800
4x800
3 ~ 380-480V
6x800
50/60 Hz
6x800
1025 rpm
8x800
3,9 A
2,56 kW
8x800
10x800
10x800
Kg
767
830
1093
1187
1401
dB(A): Nivel sonoro a 10m sin reflexin - Sound level at 10m echo free
(1) Cn: Capacidad con - Capacity with Tw1=+40C, Tw2=+35C, Ta=+30C, Glicol 30%
180
1550
1738
1894
SERIE VLE
ENFRIADORES DE LQUIDO
MOTOR EC 800
181
Glicol
910
VLE
211
MODELO
MODEL
Cn (1)
1000 rpm
91
kW
VLE
240
VLE
316
VLE
360
VLE
422
VLE
480
VLE
527
VLE
599
182
209
223
267
m3/h
kPa
16,9
74
19,1
52
25,2
92
29,2
71
33,8
70
38,2
48
37,8
105
48,6
93
m3/h
kW
A
dB(A)
59700
4,8
7,4
50
57000
5,0
7,6
50
89550
7,3
11,1
52
85500
7,5
11,5
52
119400
9,7
14,8
53
114000
10,0
15,3
53
149250
12,1
18,5
54
142500
12,5
19,1
54
750 rpm
88
114
130
151
172
193
219
Capadidad - Capacity
Cn (1)
75
kW
m3/h
kPa
13,9
52
16,2
72
21,2
68
24,1
51
27,9
49
31,9
35
35,8
96
40,7
67
m3/h
kW
A
dB(A)
44500
2,2
3,0
43
42600
2,2
3,1
43
66750
3,2
4,5
45
63900
3,4
4,7
45
89000
4,3
6,0
46
85200
4,5
6,2
46
111250
5,4
7,6
47
106500
5,6
7,8
47
500 rpm
65
87
98
117
131
146
162
Capadidad - Capacity
Cn (1)
58
kW
m3/h
kPa
10,6
56
12,1
71
16,0
41
18,2
68
21,4
90
24,3
67
27,0
57
30,1
39
m3/h
kW
A
dB(A)
29700
0,75
0,92
35
28400
0,78
0,96
35
44550
1,1
1,4
37
42600
1,2
1,4
37
59400
1,5
1,8
38
56800
1,6
1,9
38
74250
1,9
2,3
39
71000
1,9
2,4
39
m2
dm3
mm
554
56
2x54
739
75
2x66
832
83
2x66
1109
111
2x66
1109
110
2x79
1478
147
2x79
1386
137
2x79
1848
183
2x79
Caractersticas - Characteristics
Nr. x Diam.
nx
2x910
2x910
3 ~ 380-480V
3x910
50/60 Hz
3x910
1000 rpm
4x910
4,40 A
2,88 kW
4x910
5x910
5x910
Kg
454
512
651
722
850
dB(A): Nivel sonoro a 10m sin reflexin - Sound level at 10m echo free
(1) Cn: Capacidad con - Capacity with Tw1=+40C, Tw2=+35C, Ta=+30C, Glicol 30%
182
944
1038
1155
SERIE VLE
ENFRIADORES DE LQUIDO
MOTOR EC 910
183
Glicol
910
VLE
401
MODELO
MODEL
1000 rpm
Capadidad - Capacity
kW
Cn (1)
VLE
457
VLE
601
VLE
686
VLE
801
VLE
914
297
338
405
m3/h
kPa
31,7
59
36,7
47
47,5
57
55,1
44
57,6
106
73,4
98
m3/h
kW
A
dB(A)
116060
9,9
15,2
53
110400
10,3
15,7
53
174090
14,9
22,7
55
165600
15,4
23,6
55
232120
19,8
30,3
56
220800
20,6
31,4
56
750 rpm
142
167
214
243
293
334
Capadidad - Capacity
Cn (1)
kW
m3/h
kPa
26,5
43
31,0
76
39,6
41
45,0
31
54,4
95
61,9
72
m3/h
kW
A
dB(A)
86500
4,4
6,2
46
82400
4,6
6,4
47
129750
6,7
9,2
48
123600
6,8
9,5
49
173000
8,9
12,3
49
164800
9,1
12,7
50
500 rpm
112
124
168
188
222
248
Capadidad - Capacity
Cn (1)
kW
m3/h
kPa
20,7
67
23,0
44
31,1
83
34,7
62
41,2
58
46,1
42
m3/h
kW
A
dB(A)
57700
1,5
1,9
38
55000
1,6
2,0
38
86550
2,3
2,8
40
82500
2,4
2,9
40
115400
3,1
3,8
41
110000
3,2
3,9
41
m2
dm3
mm
1016
102
2x66
1355
136
2x79
1525
151
2x79
2033
202
2x105
2033
201
2x105
2710
268
2x105
Caractersticas - Characteristics
Nr. x Diam.
nx
4x910
50/60 Hz
6x910
1000 rpm
6x910
2,88 kW
8x910
8x910
Kg
1356
1511
1782
1954
948
3 ~ 380-480V
4x910
1048
dB(A): Nivel sonoro a 10m sin reflexin - Sound level at 10m echo free
(1) Cn: Capacidad con - Capacity with Tw1=+40C, Tw2=+35C, Ta=+30C, Glicol 30%
184
4,40 A
SERIE VLE
ENFRIADORES DE LQUIDO
MOTOR EC 910
185
CHARACTERISTICS
Posibilidad de diseos adaptados a sus necesidades particulares, segn el modelo elegido, la temperatura y humedad
de la zona de instalacin, la disponibilidad de agua, etc.
VENTAJAS
ADVANTAGES
Reduccin de tamao y coste de la unidad. En verano, al trabajar con batera hmeda, el enfriamiento adiabtico del aire
hace que la unidad trabaje con mayor salto trmico, por lo
que el modelo a seleccionar es inferior que el condensador o
enfriador seco.
189
PULVERIZACIN
CARACTERSTICAS
SISTEMA DE
AGUA PULVERIZADA
190
SISTEMA DE
AGUA PULVERIZADA
Por utilizarse el sistema hmedo solamente en determinados
momentos, el consumo de agua no es elevado, teniendo en cuenta
adems que al ser pulverizada, la cantidad empleada es justamente la necesaria, sin que haya acumulacin ni encharcamientos.
Este sistema mixto de trabajo en seco o hmedo es una alternativa muy ventajosa a los condensadores evaporativos y las torres
de refrigeracin por su bajo consumo de agua.
Por otra parte, como en el proceso no se acumula ni se estanca
agua, por utilizarse solamente la que el condensador o enfriador
es capaz de evaporar, el sistema no tiene riesgo alguno de generar
Legionella, por lo que es totalmente vlido desde el punto de vista
sanitario.
Podemos fabricar esta opcin de pulverizacin de agua con
diferentes variaciones en cuanto a tipo y cantidad de difusores y
tuberas, posibilidad de automatizacin etc. adaptndonos a sus
necesidades particulares en funcin de las caractersticas de la
zona de instalacin.
CLCULO DE LA CAPACIDAD
CALCULATION OF CAPACITY
Word list
Tc
Condensation temperature C
Nomenclatura utilizada
Tc Temperatura de condensacin C
Tas
Tah
Temperature difference
H.R.
Relative humidity
Ca
Salto trmico
El rendimiento trmico con batera hmeda es muy variable en funcin de las condiciones de humedad y temperatura del aire
ambiente as como de la cantidad de agua pulverizada y de cmo
se reparta la misma por la batera. Para tener una estimacin, se
utiliza el grfico GR-1.
The total heat rejection with wet coil conditions varies a lot according to the ambient temperature and humidity and also depends
on the amount of water sprayed and how it is distributed over the
finned surface of the coil. The graphic GR-1 may be used to have
an estimation.
Entering this graphic with the dry temperature of the ambient air
Tas in the hottest summer conditions and the relative humidity H.R.,
it gives the approximate temperature Tah obtained by the air humidified through the sprayed water.
Using this wet air temperature as the reference for the ambient
air temperature, the unit can be selected following the traditional
system used for selecting air cooled condensers or dry coolers as
explained somewhere else in this catalogue.
191
PULVERIZACIN
GR-1
SISTEMA DE
AGUA PULVERIZADA
EJEMPLO DE SELECCIN
SELECTION EXAMPLE
CONSUMO DE AGUA
WATER CONSUMPTION
GR-2
192
As the model VCN-231 has an air flow of 65.400 m3/h, the total
water consumption will be Ca=2,35 x 65.400 / 1000=154 L/H
This water consumption is a rough approximation and must be used
as a reference to calculate piping dimensions and the amount of
water needed in the installation.
Bat Evap 18
2300
Evaporating, condensing and liquid (heating and cooling) coils manufactured with copper tube expanded over corrugated aluminum fins with a
wide variety of options and possibilities.
For various applications: cooling cabinets, drying rooms, refrigerating
units, freezing tunnels, air conditioning equipment, etc.
For every kind of refrigerants: HFC, ammonia, CO2, water, glycol water
and others
Wide tube pitch ranges of 3/8, 1/2" and 5/8 O.D.
Fin spacing from 2,1 to 12mm with self-spacing collars that covers all the
surface of the tube allowing an optimal thermal exchange between fins
and tubes.
Smooth or inner grooved copper tubes or AISI 304L and 316L stainless
steel tubes as an option.
All kinds of options and possibilities: copper fins, pretreated fins, zinced
or tinned tubes, coated coil with polyurethane resin, legs for anchoring to
the floor, drip tray, electric or water defrosting, etc.
Possibility of special designs adapted to every particular need.
Software at our customers disposal for an automatic coil selection.
4,2
1/2
Geometra - Tube pitch
1/2:
28:
22:
25:
60:
50:
1/2
3/8
3/8
3/8
5/8
5/8
40x35
28,5x25
25x22
25x25
60x30
50x43
BATERAS / REPUESTOS
Batera - Coil
195
BATERAS
COILS
Besides evaporators and condensers completely assembled, FRIMETAL also manufactures on request heat exchanging coils built of
copper tube expanded on aluminum fins. There is a wide range of
possibilities regarding shape, external dimensions, refrigerant
used, tube pitch, type of fins, finish, etc. All the available options
are detailed below.
TIPOS DE BATERAS
COIL TYPES
GEOMETRAS DISPONIBLES
TUBE PITCH
Tubo 3/8
Tubo 3/8
Tubo 3/8
Tubo 1/2
Tubo 5/8
Tubo 5/8
en linea
al tresbolillo
al tresbolillo
al tresbolillo
al tresbolillo
al tresbolillo
25x25 mm
25x21,65 mm
28,5x25 mm
40x35 mm
60x30 mm
50x43,3 mm
ALETAS
FINS
Las aletas estndar son corrugadas y fabricadas con banda de aluminio. En las geometras de 3/8 tambin se pueden montar aletas
apersianadas que aumentan el rendimiento trmico en aire acondicionado y condensacin.
La separacin de aletas ms utilizadas son las siguientes:
2,1 mm
condensacin
2,8 mm
evaporacin en altas temperaturas,
4,2 y 6 mm evaporacin en medias temperaturas
7 mm
evaporacin en bajas temperaturas
9 y 12 mm evaporacin a muy bajas temperaturas.
Tambin se pueden fabricar las bateras con cualquier separacin
intermedia de las anteriores. El cuello es en todos los casos autoseparante y de tipo cilndrico con vuelta de cuello, cubriendo toda
la superficie del tubo, por lo que la eficacia de la transmisin trmica entre la aleta y el tubo resulta ptima.
Adems se pueden fabricar las bateras con aletas de cobre como
alternativa al aluminio para casos de ambientes corrosivos para el
mismo.
TUBOS
TUBES
Copper tube is used for standard coils, either smooth or inner grooved for O.D. 3/8 and 1/2". We can also manufacture coils with
AISI 304L or 316L stainless steel tubes expanded to aluminum fins.
The welding is performed by means of a special welding head and
with an automatic procedure type pulsing Orbital TIG in inert
atmosphere with argon. We have this system with european patent.
The stainless steel tube is used when the refrigerant is ammonia,
CO2 or as an alternative for the copper tubes in rooms with goods
that generate ammonia or other corrosive agent for copper.
The available tube pitches for the stainless steel tubes are the following:
Stainless steel tube O.D. 1/2" staggered 40x35 mm
Stainless steel tube O.D. 5/8 staggered 50x43,3 mm
196
BATERAS
COILS
CARCASA
FRAMEWORK
La carcasa que recubre la batera son las chapas finales y los marcos laterales. Los materiales utilizados pueden ser chapa de aluminio, de cobre, de acero galvanizado o de acero inoxidable. Existe
un diseo estandarizado como en el croquis que se adjunta aunque se pueden fabricar tambin bateras con los marcos laterales
y las chapas finales de formas, dimensiones y puntos de anclaje
especiales para adaptarse a todas las necesidades particulares que
se puedan tener.
The framework that covers the coil consists of end plates and lateral
frames. The materials used can be aluminum, copper, galvanized
steel or stainless steel sheets. Though there is a standardized design
as shown on the attached drawing, coils with end plates and lateral
frames of shape, dimension and supporting points specially adapted to every particular need the customer might have, can be also
manufactured.
COLOCACIN DE LA BATERA
DESESCARCHES
DEFROSTING
Desescarche elctrico mediante resistencias de acero inoxidable con los extremos vulcanizados repartidas por el interior de
la batera y conectadas a una caja estanca IP-55.
Desescarche por agua (slo para bateras en posicin vertical) mediante la colocacin de unas duchas en la parte superior para repartir el agua por toda la batera. Como opcin
en estos casos, se pueden colocar unas bandejas a ambos
lados para que recojan el agua salpicada al exterior, evitando
que caiga el suelo.
Electric defrosting by means of stainless steel heaters with vulcanized ends distributed inside the coil and connected to a
watertight junction box IP-55.
Water defrosting (only for vertically positioned coils) by
means of showers placed at the top to spread the water all
over the coil. As an option for these cases, trays can be installed at both sides of the finned surface to collect the water
expelled to the outside, avoiding water drops from falling to
the floor.
REFRIGERANT CONNECTIONS
Depending on the type and use of the coil, there are the following
types of refrigerant connections:
Liquid distributor and suction header for evaporating coils of
direct expansion
Two headers for condensing coils, pumped or gravity evaporating coils and liquid coils for water, glycol water or oil.
Two headers with flange connections. This system avoids the
use of welding and it is very useful for the case of water coils.
Two headers with connections by means of screw-in or smooth
steel fittings. This sort of connection is also much used in water
coils.
Both headers and distributor can be made of copper or stainless
steel.
TRATAMIENTOS ANTICORROSIN
ANTICORROSION TREATMENTS
BATERAS / REPUESTOS
CONEXIONES FRIGORFICAS
197
BATERAS
COILS
The whole cycle until the coil is delivered includes design, quotation
and manufacturing and it is made following the steps described
below.
DISEO DE LA BATERA
COIL DESIGN
OFERTA DE LA BATERA
QUOTATION OF A COIL
Con la batera diseada anteriormente por uno de los dos mtodos, nuestro Departamento Comercial realiza los clculos de coste
y los plazos de entrega. Con toda la documentacin resultante, se
confecciona la oferta que incluye los datos tcnicos de la batera,
un croquis de la misma y las condiciones de venta en lo que se
refiere al precio y plazo de entrega. Esta oferta se realiza en un
plazo inferior a 24 Horas.
Once the coil has been designed by one of the systems described
above, our Commercial Department calculates the cost and delivery time. The quotation is made with the resulting documentation
including the coil technical features (data), a graphic with the external dimensions, price and delivery time. This quotation is sent back
to the customer within 24 hours.
FABRICACIN DE LA BATERA
COIL MANUFACTURING
When the order from the customer is received, the coil is introduced
in the Companys production program and the manufacturing process begins. It takes only two or three weeks to be completed since
we have established a manufacturing system that has a high flexibility with reduced delivery times. FRIMETAL has a quality certification according to standard ISO-9001 and the manufacturing of
coils as well as the rest of production is subjected to the quality controls that the mentioned regulation demands.
Once the coil is manufactured, the cycle ends with the packaging
and dispatch.
198
230V/1/50Hz
M2.25.M4.AR 250
FBV-20-30-40; DFMN-7-10
M1.30.M4.VR 300
M1.30.M4.AR 300
M2.30.M6.AR 300
M2.35.M4.VR 350
CPN-113-114-116-123-124-126-133-134-136-143-144-146-143D-144D-146D-163D-164D-166D
(1) FA-250-360-530-720-890-1060; (1) FMX-170-230-340-460-570-680; (1) FXB-105-150-220-300-370-440
M1.40.M4.VR 400
M1.40.M4.AR 400
DFAN-54-65-75-87-112-130-160-190; DFMN-35-40-48-55-72-85-95-110
PIMN-72-80-90-115-118-125; PIAN-112-114-150-160-205-220; PIBN-58-75-82-92-119
M1.40.M6.AR 400
DFAS-54-65-75-87-112-130-160-190; DFMS-35-40-48-55-72-85-95-110
PIMS-72-80-90-115-118-125; PIAS-112-114-150-160-205-220; PIBS-58-75-82-92-119
M3.40.M4.VR 400
ECM-330-460-585-830; ECB-240-310-420-470
BATERAS / REPUESTOS
M2.25.M4.VR 250
199
230V/1/50Hz
Motoventilador sujeto a la embocadura
Fan motor fixed to the cowl
Incluye motoventilador, rejilla soporte y caja conexiones (no incluye la embocadura). Para modelos con embocadura tubular alta. La rejilla va sujeta a la
propia embocadura.
Including: fan motor, supporting grille and connecting box (cowl is not included). This execution is for long tube cowl and the fan motor is fixed directly to
the cowl.
M4.40.M4.VR 400
Motoventilador -
FRM-590-840-960-1145
FRB-445-510-580-820
FRL-425-500-550-710
Fan motor
PLAN-26-30-57-70-97; PLMN-17-20-38-44-60;
FBV-61-69 anteriores a 2011-before 2011
CPD-CPDA todos -all
M2.30.M6.VH 300
PLAS-26-30-57-70-97; PLMS-17-20-38-44-60;
FBV-42-47 anteriores a 2011-before 2011
M2.35.M4.AH 350
M1.40.M4.VH 400
PLAN-112-140-160-210; PLMN-72-86-95-120
M1.40.M6.VH 400
PLAS-112-140-160-210; PLMS-72-86-95-120
M3.35.M4.AH 350
200
400V/3/50Hz
400
450
450
500
ME.50.T4.AR2 500
MC.56.T4.VR2 560
MC.56.T8.VR2 560
MC.63.T4.AR2 630
MC.63.T6.VR2 630
CFN-10-11-12-13
(2)CFN-15-17-19; (1) (2)CFS-11-12-13; (2)FMX-900-1320; (2)FXB-600-870;
(2)CFSS-8-9-10
FRM-1280-1320-1860-2360-2500-2800-3600; FRB-800-1100-1500-1700-2200-2700; FRL-700-870-1200-1570-1850-2400
MRM-850-950-1280-1320-1860-2360-2360-2500-2800-3600; MRB-560-800-1100-1500-1700-1750-2200-2700
MRL-540-700-870-1200-1570-1650-1850-2400
PIM; PIB: PIL todos los modelos-all models; DFAN-1170-1420-2250-2840-3100-3700-4100; DFMN-830-920-1600-1840-2000-25002900; DFBN-450-610-940-1220-1400-1800-2100; (1)DFAS-1170-1420-2250-2840-3100-3700-4100; (1)DFMS-830-920-16001840-2000-2500-2900; (1)DFBS-450-610-940-1220-1400-1800-2100
FRM-MRM-4000-4500; FRB-MRB-3400-3800; FRL-MRL-3000-3500
(2)CFN-20-24-28-30-33-35-55-60-66-70-99-106-197-211; (1) (2)CFS-16-18-19-20-23-25-38-40-46-51-76-152
(2)CFSS-13-14-15-16-19-20-31-32-37-38-58-115
TTM-TNHM-2440-3000-3700-4700-6000; TTB-TNHB-1650-2350-2800-3800-5250
TTL-TNHL-1500-2150-2500-3600-5050; TTX-TNHX-1250-1750-2000-2900-4000
(3)FMX-1860-2360-2800-3600; (3)FXB-1200-1570-1850-2400; (2)CFS-28-31-32-35-36-57-61-64-69-73-85-92-96-113-122-128139-145-170-184-192-226-245-256; (1) (2)CFSS-22-23-24-27-28-44-47-48-54-56-67-71-73-89-94-97-108-111-133-141-145-178188-194
Incluye motoventilador, rejilla soporte y caja conexiones (no incluye la embocadura). Para modelos con embocadura tubular alta. La rejilla va sujeta a la propia
embocadura. Los modelos (1) (rejilla cuadrada antigua) al igual que otros modelos pueden llevar de origen una rejilla distinta de la enviada con el repuesto. En
estos casos, quitar la rejilla del repuesto y acoplar el motoventilador nuevo sobre
la rejilla antigua
Including: fan motor, supporting grille and connecting box (cowl is not included).
This execution is for long tube cowl and the fan motor is fixed directly to the cowl.
Models (1) (old square grille) as well as other models could originally incorporate
a grille different from the one sent with the spare part. In those cases, remove the
grille of the spare part and couple the new fan motor to the old grille.
ME.50.T4.VR1 500
BATERAS / REPUESTOS
201
Incluye motoventilador, rejilla soporte y caja conexiones (no incluye la embocadura). Para modelos con embocadura tubular alta. La rejilla va sujeta a la
propia embocadura.
Including: fan motor, supporting grille and connecting box (cowl is not included). This execution is for long tube cowl and the fan motor is fixed directly to
the cowl.
EC.50.T.VR1 500
EC.80.T.VR1 800
EC.91.T.VR1 910
CBE-26-30-35-53-61-70-79-91-105
CBE-ALE-77-87-152-173-228-259-304-345-389-443518-591-661, VCE-VLE-164-187-246-280-328-373410-466-294-335-441-502-588-670-735-837
VCE-VLE-211-240-316-360-422-480-527-599-401457-601-686-801-914
230V/1/50/60Hz
Motoventilador con soporte
Fan motor with fixing bracket
Motor elctrico -
MQ.M4.5 150
MVP-21-42-64-85
MQ.M4.10 230
Electric motor
MVP-22-41-63-84-100;
MVG-30-45-70-85-125
MVM-MVB-35-55-75-115-125-160-190 posteriores
a 2010-after 2010
FBV-15-25 posteriores a 2010-after 2010
202
Conjunto motoventilador -
(1)
(1)
Conjunto motoventilador -
(3)
(3)
(3)
(3)
CE. 18/18
KCN-134-153-201-229-268-306-335-382-458-527
KCS-107-120-161-180-214-240-268-300-359-400
Motor elctrico -
Electric motor
M 7,5CV T4
M 3CV T4
BATERAS / REPUESTOS
Ventilador centrfugo -
KCN-134-153-201-229-268-306-335-382-458-527
KCS-107-120-161-180-214-240-268-300-359-400
203
L=380
R-92
L=500
RS-55
L=550
FRM-110-145-148-165-170-230-235; FRB-94-100-105-110-150-154
FRL-85-90-95-100-130-135; PLM-17-20
DFM-20-24-35-40; PFX-18; PIM-18-20; PIB-15-17
RS-70
L=700
RS-85
L=850
230V
RS-100 L=1000
FRM-MRM-850-950-1280; FRB-MRB-560-650-800
FRL-MRL-540-600-700; MRX-520; FCM-950; DFM-920; DFB-610; CPD-150-200; FMX-340; FXB-220
RS-110 L=1100
R-84
L=1300
RS-140 L=1400
R-95
L=1500
CPD-225-300
R-604
L=1600
RS-170 L=1700
R-86
L=1900
RS-200 L=2000
RS-210 L=2100
R-606
PFX-72; FBV-70
L=2400
RS-255 L=2550
RS-300 L=3000
FRM-MRM-2500-2800-3600-4000-4490-4500-4800; FRB-MRB-2200-2700-3400-3450-3800-3900; FRL-MRL-1850-2400-2960-3000-35003850; MRB-3750-4100-5300-6400; MRL-3300-4000-5100-5900; MRX-2300-2850-3450-4850; PIM-3100; PIB-2600; PIL-2450; TTMTNHM-3700-4400-4700-5200; TTB-TNHB-2800-3350-3800-4800; TTL-TNHL-2500-2850-3600-4200; TTX-TNHX-2000-2450-2900-3400
DFM-2500-2900; DFB-1800-2100; FMX-2600-2800-3300-3600; FXB-1750-1850-2250-2400
RS-360 L=3600
FCM-3850
400V
RS-220 L=2200
RS-330 L=3300
RS-400 L=4000
RS-440 L=4400
RS-550 L=5500
204
R-723
R-745
R-767
R-789
L=1100
L=1400
L=1800
L=2100
R-725 L=2650
R-730 L=3000
MVP-21
R-63 L=750
MVP-63-64; MVG-70
R-60 L=300
MVP-22; MVG-25-30
R-64 L=1000
MVP-84-85; MVG-80-85
R-62 L=500
MVP-41-42; MVG-40-45
R-65 L=1500
MVP-100; MVG-120-125
L=800
L=1100
L=1400
L=1800
L=2100
L=2400
L=3000
SN-1
SN-2-3; SN-20-30
SN-4-5; SN-40-50
SN-6-7-60-70; EG-38
SN-8-9-80-90; EG-44-55
SN-10-100; EG-63-75
EG-94-118
RCS-400
RCS-500
70W 400
90W 500
RCS-630
RCS-710
110W 630
125W 710
Flexible heaters of 230V made of silicon with low heating power to be placed on the outlet air cowl.
For every model the power input and effective length L are indicated.
RDF-50
50W L=1000
RDF-100
100W L=2000
205
BATERAS / REPUESTOS
Resistencias flexibles a 230V de silicona de baja potencia para ser colocadas en el tubo de desage
Para cada modelo se indica la potencia absorbida y la longitud efectiva L
DI.PL.50
DI.PL.63
DI.PL.80
KX-3C
Termostato final desescarche vlido para todos los evaporadores con desescarche elctrico.
End defrosting thermostat valid for all evaporator with electric defrosting.
MVP-21-42-64-85
FMA todos los modelos-all models; MVG-25-40-80-120
MVM-MVB-35-55-75-115-125-160-190 anteriores a 2011-before 2011
FBV-15-25 anteriores a 2011-before 2011
MVP-22-41-63-84-100; MVG-30-45-70-85-125;
MVM-MVB-35-55-75-115-125-160-190 posteriores a 2010-after 2010
FBV-15-25 posteriores a 2010-after 2010
FMX-1700-2200-2600-3300
FXB-1150-1500-1750-2250
KF-150-180-220-260-340-440-520-680
206