Documentos de Académico
Documentos de Profesional
Documentos de Cultura
Lining - 74 - STEEL - Product - Information
Lining - 74 - STEEL - Product - Information
TIP TOP Oberflächenschutz Elbe GmbH TIP TOP LINING 74 for steel Index G, dated October 7th, 2013
Page: 1/2 Product Information Replaces all former editions
Application
Package Product
The COROFLAKE N Primer shall be applied on the Description
Size No.
prepared and cleaned substrate and allowed to cure.
The base coat consists of 1,000 g resin-hardener mix- Hardener No. 1 0.1 kg 590 0181
ture and 2,400 g Filler F-1 mixed together to homoge- Hardener No. 1 0.4 kg 590 0019
nous putty. Filler F-1 25 kg 591 0140
An even troweled coat of the mixed TIP TOP LINING Thin Film Curing Agent 0.75 kg 590 0214
74 material is applied onto the primed surface to
achieve a uniform thickness of approximately 1.5 mm. Storage
The first glass mat is pressed onto the base coat, then
The materials must be stored in a cool and dry place. At
saturated and rolled with the mixed resin avoiding the
a storage temperature of ≤ 20 °C the minimum shelf life
formation of blisters. Then the second 450 g/m² mat is
is as follows:
applied, rolled down and saturated with resin in the
same manner. After hardening the TIP TOP LINING 74 COROFLAKE S Primer 6 months
sealing shall be applied LINING 74 Resin 6 months
Hardener No. 01 6 months
Note: During application the coated surface must be
shaded from direct or indirect sunlight. If the storage time is exceeded, the materials must be
tested before use. Higher storage and transport
Cleaning: Solvent T-100 temperatures will reduce the shelf life. The containers
Packing Units must be kept tightly closed. Liquid products must be
stored frost-proof.
The products are supplied in the following standard
package sizes: Safety Measures
The material safety data sheets of the individual
Package Product components as well as the legal requirements for
Description
Size No. handling hazardous materials must be observed.
COROFLAKE S Primer 5 kg 590 0167
COROFLAKE S Primer 20 kg 590 0033
LINING 74 Resin 5 kg 590 0387
LINING 74 Resin 20 kg 590 0026
All data provided in this Product Information are based on the best of our knowledge and they are to inform generally about our products and
their application spectrum. In view of the multitude of possible operating conditions and parameters, the given specifications can only be seen
as general information, which do not guarantee special product properties for each particular case. In case of order all essential properties for
an individual application should concretely be enquired. On request our Technical Service will furnish a feature profile for such application
without undue delay.
TIP TOP Oberflächenschutz Elbe GmbH TIP TOP LINING 74 for steel Index G, dated October 7th, 2013
Page: 2/2 Product Information Replaces all former editions