Documentos de Académico
Documentos de Profesional
Documentos de Cultura
Cage features
1. Zero profile cage: 3-4 mm less profile compared to cage-plate combinations
2. Available in two variants:
a. 3° lordosis (Magnolis® Z3), in combination with screws
b. 6° Lordesewinkel (Magnolis® Z6), fixation screws or sealing caps
3. Screws:
a. Two screw lengths available
b. Angle between screw and cage: 40° cranial/caudal, 15° median/lateral
4. 2 Footprints (15x14 / 17x16 mm) and 4 heights (5-8mm)
5. Open architecture: enhances osseointegration and application of bone graft material
40°
h = 5-8 mm
h = 5-8 mm
40°
Maxxspine Innovative GmbH | Große Hub 3a | 65344 Eltville am Rhein | T. 06123-709403-0 | F. 06123-709403-40 | order@maxxspine.de | www.maxxspine.de
Maxxspine Innovative GmbH is distributor for the listed products. For additional information please examine the product information of the manufacturer. v1.5 – 14.09.2023 - OC
Order information 1/2
Magnolis® Z - instruments
# item number item description
5z SR-TB38-0100-Z MAGNOLIS zero profile instrument set, disposable, sterile
6 E08-R-0010-01 trial implant Magnolis S/Z (3°), 14x15/16x17, 4mm
7 E08-R-0010-02 trial implant Magnolis S/Z (3°), 14x15/16x17, 5mm
8 E08-R-0010-03 trial implant Magnolis S/Z (3°), 14x15/16x17, 6mm
9 E08-R-0010-04 trial implant Magnolis S/Z (3°), 14x15/16x17, 7mm
10 E08-R-0010-05 trial implant Magnolis S/Z (3°), 14x15/16x17, 8mm
11 E08-R-0010-06 implant-holder, inner, M2.5
12 E08-R-0010-07 implant holder Magnolis, outer, 2.3 mm wide
13 E08-R-0010-11 safety-stopper
14 E08-R-0010-09 drill with handle
15a E08-R-0010-10 implant-holder, drilling template Magnolis Z, outer, 2 guidances
15b E08-R-0010-14 implant-holder, drilling template Magnolis Z, outer, 1 guidance
16 E08-R-0010-08 torx screwdriver
5z
15 12 13
12
15b
7 9
16
13
6 8 10
10 9 8 7 11 16 14
15a
14
11
* The disposable instrument set (#5z) is only available as a whole set , the individual references on the picture
of the disposable blister (greyed out) are only for comparison with the contents of the reusable instrument set
** The sets are similar in content, but the disposable set does not include the 4mm trial implant (#6)
Maxxspine Innovative GmbH | Große Hub 3a | 65344 Eltville am Rhein | T. 06123-709403-0 | F. 06123-709403-40 | order@maxxspine.de | www.maxxspine.de
Maxxspine Innovative GmbH is distributor for the listed products. For additional information please examine the product information of the manufacturer. v1.5 – 14.09.2023 - OC
Order information 2/2
Magnolis® Z - implants
Magnolis® Z3 (only in combination with screws)
height
size (mm) 5mm 6mm 7mm 8mm
14 x 15 SR-B701-141505DOS SR-B701-141506DOS SR-B701-141507DOS SR-B701-141508DOS
16 x 17 SR-B701-161705DOS SR-B701-161706DOS SR-B701-161707DOS SR-B701-161708DOS
*only on request until further notice
Screws Z3 and Z6
item number item description
SR-B70A-004012S screw for cerv. cage MAGNOLIS Z Ø 4.0 x 12 mm
SR-B70A-004014S screw for cerv. cage MAGNOLIS Z Ø 4.0 x 14 mm
*additional screw sizes on request
Cases
Hybrid case: cervical prosthesis (above) and Magnolis® Z (below)
Maxxspine Innovative GmbH | Große Hub 3a | 65344 Eltville am Rhein | T. 06123-709403-0 | F. 06123-709403-40 | order@maxxspine.de | www.maxxspine.de
Maxxspine Innovative GmbH is distributor for the listed products. For additional information please examine the product information of the manufacturer. v1.5 – 14.09.2023 - OC