Documentos de Académico
Documentos de Profesional
Documentos de Cultura
Ariete Hidraulico 2019
Ariete Hidraulico 2019
Abstract: A hydraulic ram is a device that works based on cycles of kinetic energy, which is
produced by a water hammer and this in turn is caused by the gravity force of a fluid in
motion, which for effect of this project will be the water, when going through a slope
before reaching the ram. The fundamental objective of this project is to raise a fluid from
a lower level to a higher level without using energy from fossil fuels or electricity, causing
a minimal environmental impact in the environment that develops its operation, providing
a quick, simple, cheap solution, Low maintenance and efficient in areas of agricultural
production, livestock and rural areas where it is difficult to access equipment and
sophisticated technologies and energy dependence difficult to provide due to its location,
ensuring the purity of the water before and after being treated by water , both in the
natural source of the water, and in the system in which it will be used after passing
through the hydraulic ram.
Keywords: hydraulic ram, power cycles, water hammer.
R
0.85
0.7 0.81
0.76
0 2 4 0.72 6
H/h vs R