Waukesha Cherry-Burrell Maintenance
Votator® 4x120
Blade and
Bushing
Checks
asi
(3mm)
anu
1
Figures
ome
(3mm)
mamm
Figures
Votator® 4x120 PEEK™ Scraper Blade
‘Figure 4: Votator® 4x20 PEEK" Scrapor Blade
Maniain good tranfer ané maximum tbe He by Keeping your new PEEK™
‘soraper claces wenn spectesbons
+The Vat! 41120 uses 16 blades, part number LL119712,
+ Each bla a 13.7 incnes (948 nm) long. 1.5 inches (38 mm) wide, snd 0.25
rrenes (6 mm) tick.
Fer best performance. we recommend establishing 2 scheduled mantenancepro-
‘1am and replacing the scraper blades in compete sets when the ctcal wih
{nd ticknese mensions cf one or mace Wades reach the minimum vauies
‘shown in Figure 5 and Figure 8.
Measure tne wisn dimension shown n Figure 5 at several points along te base
‘Check te tewess mension Figure 6 at oP ends of the tube orc! su
faces Repace ay blade that shows chipping, racing or uneven wea!
Bushing Checks
Replace wor bushings when any cimensions are les than the minimum spec-
‘eats shown in gu 7
th,
YL
0.96 244'mm) 0.86" (244 mn)
minima
18 @emniiniman
Flue 7: Wear Limits Votator®4x120 Bushing