Documentos de Académico
Documentos de Profesional
Documentos de Cultura
FICHA REPOSITORIO - Patiño - David
FICHA REPOSITORIO - Patiño - David
The study and characterization of the PA12 material in mechanical properties in composite parts
printed by 3D printing and the data obtained show that the optimal configuration for a 3D printed
part is given according to the quality, pattern and fill percentage, accompanied by a PA12 filament.
(15% Carbon Fiber and 85% Nylon). Thus, the piece with a layer height of 0.15mm, due to its low
adhesion between layer and layer, is better; the concentric fill pattern, due to its structural pattern
meshing, provides greater resistance to the piece, a fill percentage of 90%, which is recommended
because it occupies more space between filling lines, in order to have a configuration established for
the type of material PA12.
Nº DE REGISTRO (en base de datos): Nº DE CLASIFICACIÓN:
(Biblioteca se encargara de llenar este campo con la (Biblioteca se encargara de llenar este
información que corresponda) campo con la información que corresponda)
DIRECCIÓN URL (tesis en la web):
(Biblioteca se encargara de llenar este campo con la información que corresponda)
ADJUNTO PDF: SI X NO