Documentos de Académico
Documentos de Profesional
Documentos de Cultura
17,5 kV (IEC)
15 kV (IEEE)
MEASUREMENT EQUIPMENT MI-17-3E
Conexiones • Connections
H3 P1 P2
H2 P1 P2
H1 P1 P2
P1 P2 P2 P2
P1 P1
S1 S2 S1 S2 S1 S2
S1 S2 S1 S2 S1 S2
TP1 TP2 TP3 TC1 TC2 TC3
1 2 3 4 5 6 7 8 9 10
38
100
/4”
Ø1
15°
130
1 Medidor
566
Ø1 Meter
15°
685
480
183 B
480
A 216
375
Tablilla
160 65
260
Board
70
8
30
ø3
20
75
80
75
500
1515 145 265 E
VISTA DE PLANTA • PLANT CUT VIEW 350 350
1065 400 G F
A - Ø3/8” R STD
B - Lectura visual del Medidor mediante mirilla
Measuring indicator by using a viewfinder.
C - Detalle del ensamble del sobretecho con el cuerpo del gabinete
475
DESCRIPCION DESCRIPTION
Conjunto formado por transformadores de intensidad y tensión Assembly made up of independent current and voltage transformers
independientes (combinados). Para servicio interior aislamiento seco. Partes (combined). For indoor service with dry insulation. Live parts moulded in
activas moldeadas en resina, envolvente exterior metalizado (frente muerto). resin, cycloalyphatic resin outer casing. Each transformer is attached to the
Cada transformador está unido a la estructura metálica del conjunto que metal structure of the assembly which includes a spacious secondary
incluye bornes secundarios, con sus conexiones eléctricas terminal box, with the corresponding electrical connections. The primary
correspondientes. Los bornes primarios pueden ser como los representados terminals may be set up us shown in the figure or by means of supplements,
en la figura o mediante complementos estudiados según sea el caso. Su according to cases. Maintenance is practically null.
mantenimiento es prácticamente nulo. Construibles bajo normas UNE, CEI, Costructed according to standards UNE, IEC, IEEE.
IEEE. Otras normas o características especiales bajo consulta. Other standards or special specifications on request.
www.arteche.com
EQUIPO MEDICION MI-17-3E MEASUREMENT EQUIPMENT
CARACTERISTICAS ELECTRICAS ELECTRICAL CHARACTERISTICS
IEC IEEE
•Tensión nominal de aislamiento (kV) 17,5 15 •Highest voltage (kV)
•Tensión máxima de servicio (kV) 17,5 15,5 •Highest voltage for equipment (kV)
•Frecuencia de utilización (Hz) 50/60 •Frequency (Hz)
•Tensión de ensayo a frecuencia industrial (durante 1 min) •Power-frequency withstand voltage (during 1 min)
- Entre primario y secundario (kV) 38 34 - On the primary and secondary (kV)
- Entre secundario y masa (kV) 3 2,5 - On the secondary winding (kV)
•Tensión inducida a 120 Hz (kV máximos)(tensión) 38 34 •Induced voltage at 120 Hz (maximum kV)(voltage)
•Ensayo impulso tipo rayo (kV cresta) 95 110 •BIL and full wave (kV crest)
•Intensidad primaria máxima (A) •Highest primary current (A)
- Simple Relación Primaria 200 - Simple Primary Ratio
•Intensidad secundaria (bajo pedido 1 ó 2 A) 5 •Secondary current (1 or 2 A on request)
•Número de secundarios máximo 1 •Maximum number of secondaries
•Tensiones secundarias •Secondary voltage
- Medida (V) 100:√3 110√3 120:√3 115 or 120 - Measure (V)
- Tension residual 100:3 110:3 115 or 120:3 - Residual voltage (V)
•Arrollamientos secundarios máximo 1 •Maximum number of secondary windings
•Sobreintensidad/tensión admisible en permanencia (IN / UN) 1.2 •Allowed continuous overcurrent/voltage (IN / UN)
CARACTERISTICAS MECANICAS MECHANICAL CHARACTERISTICS
•Peso aproximado 280 Kg/617 Lbs •Weight
5P5 30 30 30
5P10 15 15 15 VA Cl. VA Cl. VA Burden Cl.
5P20 BURDEN 5 C20 5 C20 5 C20 40 0,2 25 0,2 W-X-M-Y 0,3
IN max. Simple Relación Primaria
300 A 50 A 10 A 125 0,5 75 0,5 W-X-M-Y 0,6
Single Primary Ratio
300 1 250 1 Z 1,2
750
300 3 250 3
300 3P 250 3P
300 6P 250 6P
Bornes primarios redondos de 3/8” para boquilla tipo pozo Opcional / Optional 3/8” primary terminals round
ISO 9001