Documentos de Académico
Documentos de Profesional
Documentos de Cultura
COMCEL-TELMEX Colombia
MANUAL DE COMISIONAMIENTO BASICO
EQUIPO 7210 SAS-E
Mayo 30, 2011
MENU
1. PROPOSITO..................................................................................................................... 3
2. REQUISITOS.................................................................................................................... 3
2.2 Software.......................................................................................................................... 3
3. PROCEDIMIENTO............................................................................................................ 3
Este documento explica paso a paso el proceso de arranque cuando se inicia por
primera vez el equipo.
2. REQUISITOS
2.1 Hardware.
2.2 Software
3. PROCEDIMIENTO
Utilizando el cable serial conectar el equipo 7210 SAS-E por medio del
puerto de consola al puerto serial del portátil.
Configurar el puerto serial con los parámetros que se muestra en la figura.
Conectar el puerto 1/1/24 del equipo 7210 SAS-E al puerto Ethernet del portátil
mediante el patchcord.
Configurar el puerto Ethernet del portátil con la dirección IP 192.168.1.1/24.
You must supply some required Boot Options. At any prompt, you can
type:
"restart" - restart the query mode.
"reboot" - reboot.
"exit" - boot with with existing values.
"diag" - enter the diag shell.
"reset" - reset the bof and reboot.
Press ENTER to begin, or 'flash' to enter firmware update...
Software Location
Presionar enter.
Software Location
-----------------
You must enter the URL of the TiMOS software.
The location can be on a Compact Flash device,
or on the network.
Here are some examples
cf1:/timos1.0R1
ftp://user:passwd@192.168.1.150/./timos1.0R1
tftp://192.168.1.150/./timos1.0R1
A continuación se procede a configurar bof del equipo para que inicie la versión
de timos desde el servidor FTP o TFTP. Durante esta configuración se
preguntará la dirección de URL donde esta la imagen de timos, la dirección URL
donde esta la configuración (para este caso se digita none), luego se escribe edit
y se configura el puerto 1/1/24, luego se digita la dirección IP 192.168.1.3/24,
luego solicita la VLAN allí se digita null, posteriormente pregunta por la
configuración del puerto de uplinkB alli presionamos enter, por ultimo pregunta si
se desea guardar el bof (Do you want to save the new settings? (yes/no): allí se
digita y.
En este paso el equipo 7210 SAS-E y el portátil ya están configurados, el quipo 7210 SAS-E
iniciara por el bof y en este paso el equipo debe cargar automáticamente la versión de timos
que esta alojada en el FTP o TFTP.
Configuring Network with uplinkA Port Setting.....
Alcatel-Lucent 7210 - R1.0 Configuration Note
All Rights Reserved © Alcatel-Lucent 2008 7
No existing config file URL
Primary image location: tftp://10.10.10.1/both.tim
Initializing uplinkA port using IP addr 10.10.10.2.
Loading image tftp://10.10.10.1/both.tim
Version B-1.0.R3, Sun Mar 22 15:06:25 IST 2009 by builder in
/builder/ws/1.0/sultan/panos/main
text:(27025870-->84606180) + data:(1922158-->10725476)
Executing TiMOS image at 0x100000
Total Memory: 512MB Chassis Type: sas Card Type: badami_7210
TiMOS-B-1.0.R3 both/mpc ALCATEL SAS-E 7210 Copyright (c) 2000-2009
Alcatel-Lucent.
All rights reserved. All use subject to applicable license
agreements.
Built on Sun Mar 22 15:06:25 IST 2009 by builder in
/builder/ws/1.0/sultan/panos/main
___ ___ ___ ___
/\ \ /\__\ /\ \ /\ \
\:\ \ ___ /::| | /::\ \ /::\ \
\:\ \ /\__\ /:|:| | /:/\:\ \ /:/\ \ \
/::\ \ _\/__/ /:/|:|__|__ /:/ \:\ \ _\:\~\ \ \
/:/\:\__\ /\__\ /:/ |::::\__\ /:/__/ \:\__\ /\ \:\ \ \__\
/:/ \/__/ /:/ / \/__/~~/:/ / \:\ \ /:/ / \:\ \:\ \/__/
/:/ / /:/ / /:/ / \:\ /:/ / \:\ \:\__\
\/__/ \/__/ /:/ / \:\/:/ / \:\/:/ /
/:/ / \::/ / \::/ /
\/__/ \/__/ \/__/
Time from clock is SUN JUL 08 00:41:34 2001 UTC
CRITICAL: CLI #1001 Cannot locate the configuration file -
Using default configuration values.
MAJOR: CLI #1008 The SNMP daemon is disabled. To enable SNMP,
execute the command 'config>system>snmp no shutdown'.
TiMOS-B-1.0.R3 both/mpc ALCATEL SAS-E 7210 Copyright (c) 2000-2009
Alcatel-Lucent.
All rights reserved. All use subject to applicable license
agreements.
Built on Sun Mar 22 15:06:25 IST 2009 by builder in
/builder/ws/1.0/sultan/panos/main
Login:
Login:
Login: admin
Password: admin
A:NA00001223M4#
A:NA00001223M4#
A:NA00001223M4#
En este paso ya se tiene acceso al equipo y la versión de timos esta cargada en
el equipo 7210 SAS-E de manera temporal, a continuación se debe ejecutar el
siguiente procedimiento para bajar la versión de timos y que esta quede en la
memoria CF1 del equipo 7210 SAS-E, esto permitirá que ya no se requiera el
servidor FTP o TFTP para iniciar el equipo cuando se apague o se reinicie.
Login: admin
Password: admin
A:NA00001223M4#
A:NA00001223M4#
A:NA00001223M4#
A:NA00001223M4#
Para verificar conectividad se debe conectar el portátil al puerto 1/1/1 del equipo
y luego realizar un ping desde el equipo 7210 SAS-E al portátil, ping 192.168.1.1
Abrir una ventana de DOS y hacer un ftp a la dirección 192.168.1.15 luego de
tener acceso se digita hash se da enter y luego bin y se da enter, luego
put bot.tim
Luego, copiar y pegar el siguiente script, este crea una carpeta en la memoria
cf1 del equipo, esta carpeta tendrá el nombre de versión de timos (para este
caso 7210-SAS-E-TiMOS-2.0.R2). La carpeta se utilizará para alojar el archivo
both.tim, la carpeta se crea desde la consola (conexión serial) pegando el
siguiente script:
file
md 7210-SAS-E-TiMOS-2.0.R2
cd 7210-SAS-E-TiMOS-2.0.R2
exit
Posteriormente desde la ventana de DOS accesar al equipo 7210 SAS-E
mediante ftp, luego de tener acceso se digita hash se da enter y luego bin y se
da enter, luego se accede la carpeta creada anteriormente.
Luego se procede a pasar el archivo both.tim al equipo digitando el comando
put both.tim.
Se modifica el bof desde línea de comando (puerto serial) del equipo con el
siguiente script.
bof
primary-image cf1:\7210-SAS-E-TiMOS-2.0.R2\both.tim
primary-config cf1:\config.cfg
save
exit all
bof save
admin save