Documentos de Académico
Documentos de Profesional
Documentos de Cultura
RESUMEN: Para la realización de este laboratorio se utilizo con el fin de obtener una realización de cierto proceso
de ciertos procesos y así adquirir un mayor conocimiento sobre los fenómenos del átomo, de la electricidad en sí de la
interacción entre cargas. El experimento consto de un análisis sobre el comportamiento de partículas cargada tanto
POSITIVA y NEGATIVAMENTE, el cual consistía en frotar ciertos tipos de materiales como el PVC, VIDRIO y
PLASTICO, y se observaba como estas se atraen entre si o repelen, dependiendo del tipo del material.
Se realizo el frotamiento con ebonita a los materiales de PVC, vidrio y plástico, se hizo un primer suceso de PVC a
plástico y se atraía y después hacia el mismo PVC y se repelaba, con el vidrio era totalmente neutro, en segunda instancia
fue del plástico al PVC y se atraía, y hacia el mismo plástico se repelaba, viendo nuevamente que con el vidrio era neutro.
ABSTRACT: For the realization of this laboratory it was used in order to obtain a realization of a certain process of
certain processes and thus acquire a greater knowledge about the phenomena of the atom, of the electricity itself of the
interaction between charges. The experiment consisted of an analysis on the behavior of particles charged both
POSITIVELY and NEGATIVELY, which consisted of rubbing certain types of materials such as PVC, GLASS and
PLASTIC, and it was observed how they attract each other or repel, depending on the type of the material.
The PVC, glass and plastic materials were rubbed with ebonite, a first event was made from PVC to plastic and it was
attracted and then towards the same PVC and repelled, with the glass it was totally neutral, in the second instance it was
of the plastic to PVC and it was attracted, and towards the same plastic it was repelled, seeing again that with the glass it
was neutral.
1. INTRODUCCIÓN
R// Porque el metal es un compuesto d Las fuentes en las tablas pueden ser de 10 puntos, siendo el
mínimo aceptado 8 puntos. Se debe definir su procedencia.
mucha carga y al hacerle fricción con los
trapos este no le genera ninguna carga. 5. CONCLUSIONES
10. Si se talla una barra de ebonita con polietileno Las conclusiones son obligatorias y deben ser claras. Deben
expresar el balance final de la investigación o la aplicación del
¿Necesariamente queda cargada conocimiento.