Documentos de Académico
Documentos de Profesional
Documentos de Cultura
Resumen:
El método sísmico consiste en el análisis de ondas sísmicas, provocadas por terremotos o explosiones. El movimiento
vibratorio originado por la sacudida sísmica se resuelve en forma de trenes de ondas concéntricas que, partiendo del
hipocentro o foco sísmico, se propagan en todas direcciones. La velocidad de transmisión de estas ondas es constante
para un mismo medio, pero varía en función de la rigidez (entre otros factores) del medio atravesado. De tal manera que,
cuando las ondas se encuentran en su trayectoria un material diferente, cambian su velocidad. Este cambio de velocidad
se conoce como discontinuidad y su presencia marca el tránsito de una capa a otra.
Los primeros estudios sísmicos fueron aplicados a la prospección de hidrocarburos, para la determinación de este estudio
se basaron en mecanismos focales, transmisión de la onda y la zonificación en las capas de la Tierra, es así que a través
de una red de sismómetros ayudo a determinar y conocer la distribución en capas del planeta Tierra.
El método se fundamenta en la liberación de energía en un entorno tectónico y su transmisión a través del terreno, en la
rama de la sismología se estudian los mecanismos focales y la naturaleza de las ondas, transmisividad, velocidad y efectos
sobre los materiales, para la aplicación en las ciencias de la Tierra se fundamenta en la velocidad de transmisión, las
frecuencias de la onda y las propiedades asociadas a las ondas elásticas generadas en un punto de energización.
Cuando una onda sísmica encuentra un cambio en las propiedades elásticas del material, como es le caso de una interfase
entre dos capas geológicas; parte de la energía continúa en el mismo medio (onda incidente), parte se refleja (ondas
reflejadas) y el resto se transmite al otro medio (ondas refractadas) con cambios en la dirección de propagación, en la
velocidad y en el modo de vibración.
Las leyes de la reflexión y la refracción se derivan por el principio de Huygens cuando se considera un frente de onda que
incide sobre una interfase plana. El resultado final es que ambas leyes se combinan en un único planteamiento: en una
interfase el parámetro de rayo, p, debe tener el mismo valor para las ondas incidentes, reflejadas y refractadas. Si el
medio consta de un cierto número de capas paralelas, la ley de Snell establece que el parámetro del rayo tiene que ser el
mismo para todos los rayos reflejados y refractados resultantes de un rayo inicial dado.
Abstract:
The seismic method is based on the analysis of seismic waves caused by earthquakes or detonations. The vibratory
motion originated by the seismic shock is generated in the form of trains of concentric waves that, starting from the
hypocenter or seismic focus, propagate in all directions. The transmission velocity of these waves is constant for the same
medium, but varies according to the deformation rigidity (among other factors) of the medium traversed. Consequently,
when the waves find a different material in their trajectory, their velocity changes. This velocity change is known as
discontinuity and their presence marks the transit from one layer to another.
The first seismic investigations were applied to oil prospecting, for the determination of this study were based on focal
mechanisms, wave transmission and zonation in the layers of the Earth, so that through a network of seismometers
helped to determine and know the distribution in layers of the planet Earth.
The method is based on the release of energy in a tectonic environment and their transmission through the ground, in the
field of seismology studies the focal mechanisms and the nature of the waves, transmissivity, speed and effects on
materials, for the application in the Earth sciences is based on the transmission rate, wave frequencies and properties
associated with elastic waves generated at a point of energization.
When a seismic wave encounters a change in the elastic properties of the material, as in the case of an interface between
two geological layers; part of the energy continues in the same medium (incident wave), part is reflected (reflected
waves) and the rest is transmitted to the other medium (refracted waves) with changes in the direction of propagation,
velocity and mode of vibration.
The laws of reflection and refraction are derived by Huygens' principle when considering a wave front incident on a plane
interface. The end result is that both laws are combined in a single approach: at an interface the ray parameter, p, must
have the same value for incident, reflected and refracted waves. If the medium consists of a certain number of parallel
layers, Snell's law states that the ray parameter has to be the same for all reflected and refracted rays resulting from a
given initial ray.
RÚBRICA
Los signos de puntuación son los correctos y Existe falta de puntuación, exceso o no están
PUNTUACIÓN
están en su lugar bien ubicados
No copy-past detected and different from All documents with more than 20% similar
others will be rejected and will have a negative value
New release will be valuated (+2) for all people related (-2)
TEXT
You have reached the minimum Your text is less than expected
ORTHOGRAPHY Words are in the right writing Some words are incorrect