Documentos de Académico
Documentos de Profesional
Documentos de Cultura
924G 924Gz Wheel Loader RBB00001-UP (MACHINE) POWERED BY 3056E Engine (SEBP3526 - 81) - Systems & Components 4
924G 924Gz Wheel Loader RBB00001-UP (MACHINE) POWERED BY 3056E Engine (SEBP3526 - 81) - Systems & Components 4
Pantalla anterior
Bienvenido: cr461jb1
Producto: CARGADOR DE RUEDAS
Modelo: 924G CARGADOR DE RUEDAS RBB
Configuración: Cargador de ruedas 924G 924Gz RBB00001-UP (MÁQUINA)
CON EL MOTOR 3056E
Desmontaje y montaje
Portaherramientas integrado IT28G y tren de fuerza de cargadores de ruedas 924G, 924GZ y 928G
Número de medio -RENR6422-07 Fecha de publicación -01/10/2017 Fecha de actualización -09/10/2017
i04022083
Procedimiento de remoción
tabla 1
Herramientas necesarias
Herramienta Número de pieza Parte Descripción Cant.
UNA 1P-2420 Soporte de reparación de transmisión 1
Empieza por:
A. Retire los muñones del eje si está dando servicio a los frenos del eje trasero. Consulte Desarmado y
armado, "Soporte del muñón (eje oscilante, delantero) - Quitar e instalar" y Desarmado y armado,
"Soporte del muñón (eje oscilante, trasero) - Quitar e instalar".
B. Retire el eje fijo si está dando servicio a los frenos del eje delantero. Consulte Desarmado y armado, "Eje
fijo (delantero) - Quitar".
https://sis.cat.com/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisweb/productsearch/productheaderinfoframeset.jsp&calledpage… 1/6
24/8/2020 924G 924Gz Wheel Loader RBB00001-UP (MACHINE) POWERED BY 3056E Engine(SEBP3526 - 81) - Systems & Components
Ilustración 1 g01131954
1. Position axle housing assembly (1) and housing (2) as a unit onto Tooling (A) . The weight of axle
housing assembly (1) and housing (2) as a unit is approximately 590 kg (1300 lb).
2. Attach a suitable lifting device onto axle housing assembly (1) . Remove bolts (3) . Remove axle housing
assembly (1) . The weight of axle housing assembly (1) is approximately 159 kg (350 lb).
https://sis.cat.com/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisweb/productsearch/productheaderinfoframeset.jsp&calledpage… 2/6
24/8/2020 924G 924Gz Wheel Loader RBB00001-UP (MACHINE) POWERED BY 3056E Engine(SEBP3526 - 81) - Systems & Components
Illustration 2 g01131921
Illustration 3 g01131922
https://sis.cat.com/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisweb/productsearch/productheaderinfoframeset.jsp&calledpage… 3/6
24/8/2020 924G 924Gz Wheel Loader RBB00001-UP (MACHINE) POWERED BY 3056E Engine(SEBP3526 - 81) - Systems & Components
Illustration 4 g01131923
Installation Procedure
Table 2
Required Tools
B - Loctite 17430 -
Illustration 5 g01131923
https://sis.cat.com/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisweb/productsearch/productheaderinfoframeset.jsp&calledpage… 4/6
24/8/2020 924G 924Gz Wheel Loader RBB00001-UP (MACHINE) POWERED BY 3056E Engine(SEBP3526 - 81) - Systems & Components
1. Lubricate seals (9) and (10) with the lubricant that is being sealed. Make sure that the grooves for seals (9)
and (10) are free of any particles. Install seals (9) and (10) into the axle housing.
Illustration 6 g01131922
2. Make sure that seals (9) and (10) that were previously installed are positioned correctly. Install piston (8)
into the axle housing evenly. Immerse disc (7) in clean oil that is being sealed. Install disc (7) .
Illustration 7 g01131921
https://sis.cat.com/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisweb/productsearch/productheaderinfoframeset.jsp&calledpage… 5/6
24/8/2020 924G 924Gz Wheel Loader RBB00001-UP (MACHINE) POWERED BY 3056E Engine(SEBP3526 - 81) - Systems & Components
Illustration 8 g01131954
Improper assembly of parts that are spring loaded can cause bodily
injury.
4. Apply Tooling (B) to the mating surface of axle housing assembly (1) . Attach a suitable lifting device
onto axle housing assembly (1) . Position axle housing assembly (1) onto housing (2) . The weight of axle
housing assembly (1) is approximately 159 kg (350 lb).
5. Install bolts (3) . Tighten bolts (3) to a torque of 300 ± 40 N·m (221 ± 30 lb ft).
6. Remove axle housing assembly (1) and housing (2) as a unit from Tooling (A) . The weight of axle
housing assembly (1) and housing (2) as a unit is approximately 590 kg (1300 lb).
End By:
a. Install the fixed axle. Refer to Disassembly and Assembly, "Fixed Axle (Front) - Install".
b. Install the axle trunnions. Refer to Disassembly and Assembly, "Trunnion Support (Oscillating Axle,
Front) - Remove and Install" and Disassembly and Assembly, "Trunnion Support (Oscillating Axle, Rear)
- Remove and Install".
Copyright 1993 - 2020 Caterpillar Inc. Mon Aug 24 2020 06:22:50 GMT-0500 (hora estándar de Colombia)
All Rights Reserved.
cr461jb1
Private Network For SIS Licensees.
https://sis.cat.com/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisweb/productsearch/productheaderinfoframeset.jsp&calledpage… 6/6