Documentos de Académico
Documentos de Profesional
Documentos de Cultura
Siguiente ejercicio
Nota: para realizar esta tarea, su computadora debe tener una tarjeta de red f�sica
(cableada o inal�mbrica) y estar conectada a una red.
En el �rea Tipo de conexi�n , verifique que Red privada est� seleccionada y luego
haga clic en Aceptar .
En el �rea Tipo de conexi�n , verifique que Red interna est� seleccionada y luego
haga clic en Aceptar .
In File Explorer, click the Home tab, and then click the New Folder icon twice to
create two new folders. Right-click each folder, and rename them:
LON-GUEST1
LON-GUEST2
In Hyper-V Manager, in the Actions pane, click New, and then click Virtual Machine.
In the New Virtual Machine Wizard, on the Before You Begin page, click Next.
On the Specify Name and Location page, select Store the virtual machine in a
different location, enter the following values, and then click Next:
Name: LON-GUEST2
On the Specify Generation page, click Generation 2, and then click Next.
On the Assign Memory page, in the Startup memory box, enter a value of 1024 MB, and
then click Next.
On the Configure Networking page, click Isolated Network, and then click Next.
On the Connect Virtual Hard Disk page, click Create a virtual hard disk.
In the Size text box, type 127, and then click Finish.
In the Settings for LON-GUEST2 on LON-HOST1 window, in the Hardware area, click
SCSI Controller.
In the right pane, click DVD Drive, and then click Add.
In the Boot order area, click Network Adapter, click Move Down twice, and then
click OK.
En la p�gina D�nde desea instalar Windows , haga clic en Drive 0 Unallocated Space
y luego haga clic en Next .
Nota: La instalaci�n del sistema operativo Windows Server requiere un per�odo de
tiempo prolongado. Puede trabajar en la siguiente tarea mientras espera a que se
complete la instalaci�n.
En la p�gina Choose Disk Type , seleccione Differencing y luego haga clic en Next .
Nota: La letra de la unidad para la ruta de ubicaci�n del archivo en los siguientes
pasos puede variar seg�n la configuraci�n del host f�sico.
In the Bandwidth Management area, select the Enable bandwidth management check box.
En Hyper-V Manager , haga clic con el bot�n derecho en LON-GUEST2 y luego haga clic
en Configuraci�n .
En el �rea Hardware , expanda Disco duro y luego haga clic en Calidad de servicio .
Haga clic con el bot�n derecho en LON-GUEST2 y luego haga clic en Conectar .
Cambie a LON-GUEST2 .
Switch to LON-HOST1.
In the Settings for LON-GUEST2 on LON-HOST1 window, in the Hardware area, click Add
Hardware.
In the Add Hardware area, click Network Adapter, and then click Add.
Cambie a LON-GUEST2 .
Cambie a LON-HOST1 .
Haga clic con el bot�n derecho en el punto de control m�s reciente y luego haga
clic en Aplicar .
Verifique que el estado de LON-GUEST2 est� apagado porque era un punto de control
de producci�n.
Ejercicio anteriorSiguiente ejercicio
Nota : antes de comenzar esta tarea, verifique la ubicaci�n de las unidades base y
las unidades de curso 20740. Necesita la letra de unidad para ambas ubicaciones en
este ejercicio. El ejercicio asume que la letra de unidad E
Escriba la letra de unidad para las im�genes base y luego presione Entrar.
Escriba la letra de unidad para las im�genes del curso y luego presione Entrar.
Para ver la actividad en LON-NVHOST2 , en Hyper-V Manager , haga clic con el bot�n
derecho en 20740C-LON-NVHOST2 y luego haga clic en Conectar .
Cambie a LON-NVHOST2 .
You will deploy the Hyper-V server role, configure virtual machine storage and
networking, and deploy the virtual machines.
Next Exercise
In the Hyper-V Settings for LON-HOST1 window, click each of the available options
in the left pane, and review the description.
Click Cancel.
Previous ExerciseNext Exercise
Note- To perform this task, your computer must have physical network card (wired or
wireless) and be connected to a network.
In Hyper-V Manager, click LON-HOST1, and then in the Actions pane, click Virtual
Switch Manager.
In the Virtual Switch Manager for LON-HOST1 window, in the left pane, click New
virtual network switch.
In the Create virtual switch pane, click External, and then click Create Virtual
Switch.
In the Virtual switch properties pane, in the Name text box, type Physical Network.
In the Connection type area, click External network. Select the Allow management
operating system to share this network adapter check box, and then click OK.
In the Apply Networking Changes dialog box, read the warning that displays, and
then click Yes.
In Server Manager, click Local Server, and then verify that the name of the network
adapter has changed to vEthernet (Physical Network).
Previous ExerciseNext Exercise
In the Virtual Switch Manager for LON-HOST1 window, in the left pane, click New
virtual network switch.
In the Create virtual switch pane, click Private, and then click Create Virtual
Switch.
In the Virtual Switch Properties pane, in the Name text box, type Isolated Network.
In the Connection type area, verify that Private network is selected, and then
click OK.
In the Virtual Switch Manager for LON-HOST1 window, in the left pane, click New
virtual network switch.
In the Create virtual switch pane, click Internal, and then click Create Virtual
Switch.
In the Virtual Switch Properties pane, in the Name text box, type Host Internal
Network.
In the Connection type area, verify that Internal network is selected, and then
click OK.
In Server Manager, verify that a new network adapter named vEthernet (Host Internal
Network) has been created.
Previous ExerciseNext Exercise
6. Exercise 3: Creating and configuring virtual machines
Task 1: Create a Generation 2 virtual machine
In File Explorer, click the Home tab, and then click the New Folder icon twice to
create two new folders. Right-click each folder, and rename them:
LON-GUEST1
LON-GUEST2
In Hyper-V Manager, in the Actions pane, click New, and then click Virtual Machine.
In the New Virtual Machine Wizard, on the Before You Begin page, click Next.
On the Specify Name and Location page, select Store the virtual machine in a
different location, enter the following values, and then click Next:
Name: LON-GUEST2
On the Specify Generation page, click Generation 2, and then click Next.
On the Assign Memory page, in the Startup memory box, enter a value of 1024 MB, and
then click Next.
On the Configure Networking page, click Isolated Network, and then click Next.
On the Connect Virtual Hard Disk page, click Create a virtual hard disk.
In the Size text box, type 127, and then click Finish.
In the Settings for LON-GUEST2 on LON-HOST1 window, in the Hardware area, click
SCSI Controller.
In the right pane, click DVD Drive, and then click Add.
In the Boot order area, click Network Adapter, click Move Down twice, and then
click OK.
In the Windows Setup window, click Next, and then click Install now.
On the Select the operating system you want to install page, click Windows Server
2016 Datacenter Evaluation (Desktop Experience), and then click Next.
On the Applicable notices and license terms page, select the I accept the license
terms check box, and then click Next.
On the Which type of installation do you want page, click Custom: Install Windows
only (advanced).
On the Where do you want to install Windows page, click Drive 0 Unallocated Space,
and then click Next.
Note: The Windows Server operating system installation requires an extended amount
of time. You can work on the next task while waiting for the installation to
complete.
On the Customize settings page, in the Password and Reenter password text boxes,
type Pa55w.rd, and then click Finish.
In Hyper-V Manager, in the Actions pane, click New, and then click Hard Disk.
In the New Virtual Hard Disk Wizard, on the Before You Begin page, click Next.
On the Choose Disk Format page, click VHD, and then click Next.
On the Choose Disk Type page, select Differencing, and then click Next.
Note: The drive letter for the file location path in the following steps might vary
depending on the configuration of the physical host.
On the Specify Name and Location page, specify the following details, and then
click Next:
Name: LON-GUEST1.vhd
Location: C:\Program Files\Microsoft Learning\Base\Base17C-WS16-1607.vhd
At the Windows PowerShell command prompt, type the following command to create a
new virtual machine named LON-GUEST1, and then press Enter:
New-VM -Name LON-GUEST1 -MemoryStartupBytes 1024MB -VHDPath "E:\Program
Files\Microsoft Learning\20740\Drives\LON-GUEST1\LON-GUEST1.vhd" -SwitchName
"Isolated Network"
In the Settings for LON-GUEST1 on LON-HOST1 window, note the list of hardware for
LON-GUEST1.
In the Bandwidth Management area, select the Enable bandwidth management check box.
Select the Guest services check box, and then click OK.
Note: You must have completed the previous tasks in this exercise before you can
continue. This includes shutting down LON-GUEST2.
In the Settings for LON-GUEST2 on LON-HOST1 window, note the list of hardware for
LON-GUEST2. Note the differences from LON-GUEST1.
In the Hardware area, click Security, and then read the settings that are
available.
Verify that the Enable dynamic memory check box is not selected.
In the Hardware area, expand Hard Drive, and then click Quality of Service.
Select the Guest services check box, and then click OK.
Previous ExerciseNext Exercise
Switch to LON-GUEST2.
In Server Manager, click Local Server, and verify that there is only one network
adapter.
Switch to LON-HOST1.
In the Settings for LON-GUEST2 on LON-HOST1 window, in the Hardware area, click Add
Hardware.
In the Add Hardware area, click Network Adapter, and then click Add.
In the Network adapter area, in the Virtual switch box, select Host Internal
Network, and then click OK.
Switch to LON-GUEST2.
On LON-GUEST2, in Server Manager, refresh the view and verify that a second network
adapter has been added.
Switch to LON-HOST1.
On LON-HOST1, in Hyper-V Manager, right-click LON-GUEST2, and then click
Checkpoint.
Read the information in the Virtual Machine Checkpoint window, and then click OK.
Verify that the Status for LON-GUEST2 is Off because it was a production
checkpoint.
Previous ExerciseNext Exercise
On LON-HOST1, click the Start button, and then click Windows PowerShell.
In Windows PowerShell, at the command prompt, type the following command, and then
press Enter:
Set-VMProcessor LON-GUEST2 -EnableHostResourceProtection $true
In the Export Virtual Machine dialog box, in the Location text box, type E:\Program
Files\Microsoft Learning\20740\Drives\Guest2-Bak, and then click Export.
Previous ExerciseNext Exercise
Note- Before beginning this task, verify the location of the base drives and 20740
course drives. You need the drive letter for both locations in this exercise. The
exercise assumes that the drive letter E
Type the drive letter for the base images, and then press Enter.
Type the drive letter for the course images, and then press Enter.
On LON-HOST1, in Hyper-V Manager, in the Virtual Machines pane, verify that the
Configuration Version for 20740C-LON-NVHOST2 is 5.0.
At the Windows PowerShell prompt, type the following command, and then press Enter:
Set-VMProcessor -VMName 20740C-LON-NVHOST2 -ExposeVirtualizationExtensions $true
On LON-HOST1, at the Windows PowerShell prompt, type the following command, and
then press Enter:
Start-VM 20740C-LON-NVHOST2
Wait until LON-NVHOST2 has started, type the following at the Windows PowerShell
prompt, and then press Enter.
Enter-PSSession -VMName 20740C-LON-NVHOST2
Wait for LON-NVHOST2 to restart. The virtual machine might restart several times.
Switch to LON-NVHOST2.
Verify that LON-NVHOST2 is listed in Hyper-V Manager, and then close Hyper-V
Manager.
Previous Exercise