Documentos de Académico
Documentos de Profesional
Documentos de Cultura
Informe Laboratorio de Paviemntos
Informe Laboratorio de Paviemntos
DEPARTAMENTO DE INGENIERIA
AREA DE LABORATORIO MECANICA DE SUELOS
In the present laboratory the classification of soils is done by means of the AASHTO and
USCS method taking into account the Atterberg indices of the soils. In the experience
carried out, the liquid limit, which resulted 𝑳𝑳 = 23% and 25 strokes and, plastic limit,
which obtained that 𝑳𝒑 = 5.8% and the plasticity index of the soils, were determined to
be 𝑰𝒑 = 16.7%. For the achievement of the practice the different equipment provided by
the laboratory are used, where it was sought to determine the flow curve, the liquid limit
curve. Some of these are the scales and sieves of square mesh that will be used to measure
the uniform separation of each one respectively.
Keywords
Soils, classification, AASHTO, Atterberg indices, liquid limit, plastic limit, plasticity,
fluidity.
UNIVERSIDAD DE LA COSTA
DEPARTAMENTO DE INGENIERIA
AREA DE LABORATORIO MECANICA DE SUELOS
5. Análisis de Datos
Limite Plástico:
Contenido de humedad:
PESO TARA PESO TARA + %
MUESTRA PESO Ww
TARA VACIA MUESTRA SECA INT. + MUESTRA MUESTRA Ws(g) contenido
HUMEDAD ᵂ(%) TARA (g) (g)
(g) (g) HUMEDA(g) SECA(g) de agua
(g)
15.8 59.3 57 5.6% 3 11.6 11 10.4 0.6 0.6 5.2%
15.8 55.3 53 6.2%
2 11.5 11 10.4 0.5 0.6 4.3%
12 63.6 61 5.3%
# 1 2 3 PROM.
DIAMETRO(cm) 15.242 15.202 15.133 15.2
ALTURA(cm) 11.695 11.638 11.645 11.7
UNIVERSIDAD DE LA COSTA
DEPARTAMENTO DE INGENIERIA
AREA DE LABORATORIO MECANICA DE SUELOS
% HUMEDAD 9.4%
Ø CILINDRO(cm) 15.19
% HUMEDAD 17%
g/cm3 Kg/m3
1.5 0.0015
Límite de líquido:
UNIVERSIDAD DE LA COSTA
DEPARTAMENTO DE INGENIERIA
AREA DE LABORATORIO MECANICA DE SUELOS
Proctor
Para la curva de densidad seca.
DATOS
Conclusiones
Según los datos obtenidos la
muestra es de baja plasticidad.
Por medio de la gráfica realizada
de la muestra, se puede decir que
la humedad óptima para el
material es de 14%.
La densidad máxima para el
DATOS
proctor es de 2.094 g/cm3.
MAX.DENSIDAD SECA(g/cm3) 2.094
Con esta prueba se obtiene la
CONT. DE AGUA 14% humedad óptima de
compactación, así como, el peso
específico seco máximo, con la
finalidad de obtener una muy
Para la curva peso seco unitario. buena compactación en campo si
se reproducen las condiciones en
DATOS
las que se realiza la práctica en el
PESO UNITARIO SECO(lbf/feet3) 141.92 147.83 153.80 156.76
laboratorio; ofrece resultados
CONT. DE AGUA 9% 12% 15% 17% confiables que si realmente se
cumplen en campo se pueden
obtener resultados satisfactorios.
UNIVERSIDAD DE LA COSTA
DEPARTAMENTO DE INGENIERIA
AREA DE LABORATORIO MECANICA DE SUELOS
Anexos
Contenido de humedad:
Limite Plástico: