Documentos de Académico
Documentos de Profesional
Documentos de Cultura
Nicolas Arturo Valencia López (1866186), Steven Encarnación Montalvo (1866082), Oscar
Andrés Camacho Montoya (1866223), Andres Felipe Rubio (1866106), steven ortega jimenez
(1866028)
ABSTRACT: In this report we want to present 2.1 Manipular y identificar los componentes comúnmente
what has been done in the electronics laboratory usados en electrónica y reconocerlos en diferentes tipos de
marcas de identificación de sus pines.
as a practice in the use of measuring instruments
where circuits were built in the guide to solve 2.2 Aprender a manipular la protoboard.
analytically and in practice, to review how they
vary the calculations with what reality is. 2.3 Conocer y manipular las funciones del equipo básico
de laboratorio.
6. DESARROLLO
(figura 2.0)
( figura 1.0)
(figura 3.0)
6.2)
4.2 4.3
RESISTENCIAS (figura 2.0 y 3.0). CONDENSADORES. (figura 4.0).
1 IN4728A 0 654
2 IN5221B 0 560
3 IN4734A 0 570
(figura 4.0)
4.5
FUENTE (INDEPENDIENTE)
4.7
SALIDA 1 FUENTE CON RESISTENCIA (330Ω)
1. V. MÁXIMO V. MÍNIMO
Posición Corriente V. V.
31.0 v 2.9 v perilla display display multímet
ro
4.6
6.3)
4.8
R=1kΩ R=15kΩ
Corriente 3.07 mA 8 mA
S +50%/-20%
4.10
RESISTENCIA EN PARALELO-
P +100%/-0%
Resistencia en 38.3Ω
paralelo G 2%
Resistencia 1 3.84Ω
J 5%
Resistencia 2 38Ω
M 20%
5.1
Z +80%/-20%
REFERENCIAS:
1. http://www.profesormolina.co
m.ar/electronica/componentes/c
apacitores/lec_cond.htm
(Imagen 3)
(Imagen 4)
CONCLUSIONES:
1.1 La práctica en el laboratorio aprendimos a
manipular y familiarizarse con los componentes
del laboratorio.