Documentos de Académico
Documentos de Profesional
Documentos de Cultura
British Standard List PDF
British Standard List PDF
The following British Standards are listed or BS EN 50290 ......................................................14 BS 6339 ........................................................12, 25
referred to in this issue of Update Standards BS EN 50364 ......................................................14 BS 7772 ..............................................................16
with the exception of those in ‘New Work
Started’. BS EN 50366 ......................................................19 BS 7780 ........................................................16, 24
BS EN 50397 ......................................................14 BS 7839 ........................................................17, 24
Building and civil engineering BS EN 50411 ......................................................15 DD CEN/TS 15656 ..............................................18
BS EN 55015 ......................................................19 BS EN 81 ............................................................19
BS 4248 ........................................................14, 23
BS EN 60079 ................................................24, 25 BS EN 267 ............................................................8
BS 5950 ..............................................................23
BS EN 60318 ................................................15, 24 BS EN 453 ..........................................................20
BS 5974 ................................................................8
BS EN 60335 ..........................................15, 19, 22 BS EN 632 ....................................................11, 24
BS 6100 ................................................................8
BS EN 60384 ........................15, 19, 20, 23, 24, 25 BS EN 869 ..........................................................20
BS 6911 ........................................................17, 23
BS EN 60630 ......................................................22 BS EN 1057 ........................................................20
BS 9295 ................................................................8
BS EN 60730 ................................................15, 22 BS EN 1495 ........................................................20
DD CEN/TS 13307 ..............................................18
BS EN 60745 ................................................15, 24 BS EN 1676 ..........................................................8
DD CEN/TS 15366 ..............................................18
BS EN 60809 ......................................................22 BS EN 1706 ........................................................10
BS EN 196 ............................................................8
BS EN 61010 ......................................................22 BS EN 1713 ..................................................14, 24
BS EN 249 ............................................................8
BS EN 61029 ......................................................15 BS EN 1870 ........................................................21
BS EN 338 ............................................................8
BS EN 61051 ................................................20, 25 BS EN 2240 ........................................................10
BS EN 1501 ........................................................21
BS EN 61280 ......................................................15 BS EN 2863 ........................................................10
BS EN 1994 ........................................................23
BS EN 61300 ................................................15, 23 BS EN 2954 ........................................................10
BS EN 1996 ........................................................19
BS EN 61347 ......................................................22 BS EN 3226 ........................................................11
BS EN 1999 ........................................................21
BS EN 61557 ......................................................24 BS EN 3227 ........................................................11
BS EN ISO 7096 ..................................................19
BS EN 61753 ......................................................15 BS EN 3537 ........................................................11
BS EN 12269 ......................................................12
BS EN 61755 ......................................................15 BS EN 3538 ........................................................11
BS EN 13084 ......................................................19
BS EN 61850 ......................................................15 BS EN 3539 ........................................................11
BS EN 14279 ......................................................21
BS EN 61869 ......................................................16 BS EN 3660 ........................................................11
BS EN 14695 ......................................................12
BS EN 62002 ......................................................16 BS EN 3753 ........................................................11
BS EN 15304 ......................................................12
BS EN 62148 ......................................................16 BS EN ISO 3908 ............................................11, 24
BS EN 15636 ......................................................14
BS EN 62333 ......................................................16 BS EN ISO 4254 ............................................11, 24
BS EN 15651 ......................................................14
BS EN 62493 ......................................................16 BS EN 4474 ........................................................11
BS EN 15743 ................................................14, 23
BS IEC 60079 ......................................................25 BS EN 4632 ........................................................11
BS EN 15848 ......................................................14
BS IEC 61010 ......................................................25 BS EN 4662 ........................................................11
BS ISO 10265 ...............................................17, 23
BS CECC 30801 ..................................................24 BS EN ISO 4945 ............................................11, 23
PD CEN/TR 14383 ...............................................18
DD IEC/TS 61850 ..........................................19, 25 BS EN ISO 5821 ............................................11, 24
NA to BS EN 1993 ................................................8
DD CLC/TS 61850 ........................................19, 25 BS EN 6069 ........................................................11
NA to BS EN 1999 ..............................................22
PD CLC/TR 50542 ...............................................18 BS EN ISO 9445 ............................................11, 24
Consumer products and services PD IEC/TR 61292 ................................................18 BS EN 10283 ......................................................11
PD IEC/TR 61341 ................................................18 BS EN 12062 ................................................14, 24
BS 1384 ........................................................16, 23 BS EN 12663 ......................................................12
PD IEC/TR 62476 ................................................18
BS 3951 ..............................................................20 BS EN 12864 ......................................................21
BS QC 300000 .............................................15, 24
BS 4540 ........................................................10, 23 BS EN 12965 ......................................................21
BS QC 300100 .............................................15, 24
BS 8517 ................................................................8 BS EN 13001 ......................................................21
BS QC 300301 ....................................................24
DD CEN ISO/TS 10272 ........................................18 BS EN 13322 ................................................19, 23
DD CEN ISO/TS 16634 ........................................18 BS QC 300400 ....................................................24
BS EN ISO 13351 ..........................................12, 25
BS EN 597 ..........................................................22 BS QC 300401 ....................................................24
BS EN 13418 ......................................................21
BS EN 1022 ........................................................22 BS QC 300600 ....................................................24
BS EN 14910 ......................................................21
BS EN 1023 ........................................................22 BS QC 300601 ....................................................25
BS EN 15056 ......................................................21
BS EN 1129 ........................................................22 BS QC 300700 ....................................................25
BS EN 15622 ......................................................14
BS EN 1130 ........................................................22 BS QC 300701 ....................................................25
BS EN ISO 17635 ..........................................14, 24
BS EN 1334 ........................................................22 BS QC 300801 ....................................................25
BS EN ISO 20815 ................................................14
BS EN 1725 ........................................................22 BS QC 301200 ....................................................25
BS EN ISO 23279 ..........................................14, 24
BS EN ISO 2825 ............................................10, 23 BS QC 301201 ....................................................25
BS EN 23908 ................................................11, 24
BS EN 12507 ......................................................12 BS QC 301800 ....................................................25
BS EN 25821 ................................................11, 24
BS EN 12727 ......................................................22 BS QC 301900 ....................................................25
BS ISO 3547 .......................................................22
BS EN 15543 ......................................................19 BS QC 301901 ....................................................25
BS ISO 3548 .......................................................16
BS EN 50131 ................................................14, 24 BS QC 420000 ....................................................25
BS ISO 3780 .................................................16, 26
BS ISO 5 .......................................................16, 23 BS ISO 4251 .................................................16, 26
BS ISO 3890 .......................................................16 Engineering
BS ISO 6194 .................................................16, 24
BS ISO 9211 .......................................................17 BS 799 ..................................................................8 BS ISO 6550 .......................................................16
BS ISO 17321 .....................................................22 BS 848 ................................................................12 BS ISO 6580 .................................................12, 25
BS ISO 23954 .....................................................17 BS 3385 ..............................................................23 BS ISO 7612 .......................................................17
DD ISO/TS 27105 ................................................19 BS 3455 ..............................................................23 BS ISO 10191 ...............................................17, 26
DD ISO/TS 27106 ................................................19 BS 3510 ..............................................................23 BS ISO 10679 .....................................................17
DD CLC/TS 50131 ........................................14, 24 BS 3664 ..............................................................23 BS ISO 10911 ...............................................17, 24
BS 3775 ..............................................................23 BS ISO 11929 ...............................................17, 25
Electrotechnical BS 3890 ..............................................................23 BS ISO 12188 .....................................................17
BS 4607 ..............................................................20 BS 4247 ..............................................................23 BS ISO 12214 .....................................................17
BS 6201 ........................................................15, 23 BS 5045 ..............................................................23 BS ISO 16110 .....................................................17
BS EN 50015 ......................................................24 BS 5288 ..............................................................23 BS ISO 16750 .....................................................17
BS EN 50065 ......................................................21 BS 6200 ........................................................11, 23 BS ISO 16992 .....................................................17
BS 6701:2010 BS EN 196-6:2010
BRITISH STANDARDS Telecommunications equipment and Methods of testing cement. Determination of
telecommunications cabling. Specification for fineness
The following British Standard installation, operation and maintenance
supersedes BS EN 196-6:1992
publications are available from supersedes BS 6701:2004 ISBN 978 0 580 62238 0
BSI Customer Services (see ’How to order’ ISBN 978 0 580 67615 4
on page 2). £71.00 members, £142.00 non-members
£43.00 members, £86.00 non-members
B/516
The publications listed below are new TCT/7
BS EN 2240-038:2010
BS EN 2240-029:2010 Aerospace series. Lamps, incandescent. Lamp,
BS EN 2240-021:2010 Aerospace series. Lamps, incandescent. Lamp, code 401. Product standard
Aerospace series. Lamps, incandescent. Lamp, code 338. Product standard
code 313. Product standard no current standard is superseded
no current standard is superseded
no current standard is superseded ISBN 978 0 580 69540 7
ISBN 978 0 580 69400 4
ISBN 978 0 580 69392 2 £35.00 members, £70.00 non-members
£35.00 members, £70.00 non-members
£35.00 members, £70.00 non-members ACE/6
ACE/6
ACE/6
BS EN 2240-039:2010
Aerospace series. Lamps, incandescent. Lamp,
BS EN 2240-030:2010 code 600. Product standard
BS EN 2240-022:2010 Aerospace series. Lamps, incandescent. Lamp, no current standard is superseded
Aerospace series. Lamps, incandescent. Lamp, code 345. Product standard
code 315. Product standard ISBN 978 0 580 69541 4
no current standard is superseded
no current standard is superseded £35.00 members, £70.00 non-members
ISBN 978 0 580 69401 1
ISBN 978 0 580 69393 9 ACE/6
£35.00 members, £70.00 non-members
£35.00 members, £70.00 non-members
ACE/6
ACE/6 BS EN 2240-040:2010
Aerospace series. Lamps, incandescent. Lamp,
code 680. Product standard
BS EN 2240-031:2010
BS EN 2240-023:2010 no current standard is superseded
Aerospace series. Lamps, incandescent. Lamp,
Aerospace series. Lamps, incandescent. Lamp,
code 356. Product standard ISBN 978 0 580 69542 1
code 316. Product standard
no current standard is superseded £35.00 members, £70.00 non-members
no current standard is superseded
ISBN 978 0 580 69532 2 ACE/6
ISBN 978 0 580 69394 6
£35.00 members, £70.00 non-members
£35.00 members, £70.00 non-members
ACE/6 BS EN ISO 2825:2010
ACE/6
Spices and condiments. Preparation of a ground
sample for analysis
BS EN 2240-024:2010 BS EN 2240-032:2010 supersedes BS 4540-2:1982
Aerospace series. Lamps, incandescent. Lamp, ISBN 978 0 580 68789 1
Aerospace series. Lamps, incandescent. Lamp,
code 376. Product standard
code 327. Product standard £35.00 members, £70.00 non-members
no current standard is superseded
no current standard is superseded AW/7
ISBN 978 0 580 69533 9
ISBN 978 0 580 69395 3
£35.00 members, £70.00 non-members
£35.00 members, £70.00 non-members
ACE/6 BS EN 2863:2010
ACE/6 Aerospace series. Nuts, anchor, self-locking,
fixed, 90º corner, with counterbore, in heat
resisting steel, MoS2 lubricated. Classification:
BS EN 2240-025:2010 BS EN 2240-033:2010 1100 MPa (at ambient temperature)/315ºC
Aerospace series. Lamps, incandescent. Lamp, Aerospace series. Lamps, incandescent. Lamp, no current standard is superseded
code 328. Product standard code 377. Product standard
ISBN 978 0 580 70735 3
no current standard is superseded no current standard is superseded
£35.00 members, £70.00 non-members
ISBN 978 0 580 69396 0 ISBN 978 0 580 69535 3
ACE/12
£35.00 members, £70.00 non-members £35.00 members, £70.00 non-members
ACE/6 ACE/6
BS EN 2954-002:2010
Aerospace series. Macrostructure of titanium
and titanium alloy wrought products.
BS EN 2240-026:2010 BS EN 2240-034:2010 Macrostructure of bar, section, forging stock
Aerospace series. Lamps, incandescent. Lamp, Aerospace series. Lamps, incandescent. Lamp, and forgings
code 330. Product standard code 382. Product standard no current standard is superseded
no current standard is superseded no current standard is superseded ISBN 978 0 580 70736 0
ISBN 978 0 580 69397 7 ISBN 978 0 580 69536 0 £62.00 members, £124.00 non-members
£35.00 members, £70.00 non-members £35.00 members, £70.00 non-members ACE/61/-/49
ACE/6 ACE/6
BS EN ISO 3175-1:2010
Textiles. Professional care, drycleaning and
BS EN 2240-027:2010 BS EN 2240-035:2010 wetcleaning of fabrics and garments.
Aerospace series. Lamps, incandescent. Lamp, Aerospace series. Lamps, incandescent. Lamp, Assessment of performance after cleaning and
code 334. Product standard code 387. Product standard finishing
no current standard is superseded no current standard is superseded supersedes BS EN ISO 3175-1:1998
ISBN 978 0 580 69398 4 ISBN 978 0 580 69537 7 ISBN 978 0 580 68536 1
£35.00 members, £70.00 non-members £35.00 members, £70.00 non-members £43.00 members, £86.00 non-members
ACE/6 ACE/6 TCI/82
BS EN 12663-1:2010
BS EN ISO 11111-1:2009 Railway applications. Structural requirements of BS EN 14695:2010
Textile machinery. Safety requirements. railway vehicle bodies. Locomotives and Flexible sheets for waterproofing. Reinforced
Common requirements passenger rolling stock (and alternative method bitumen sheets for waterproofing of concrete
for freight wagons) bridge decks and other trafficked areas of
supersedes BS EN ISO 11111-1:2005
supersedes BS EN 12663:2000 which remains concrete. Definitions and characteristics
ISBN 978 0 580 63222 8
current no current standard is superseded
£93.00 members, £186.00 non-members
ISBN 978 0 580 58608 8 ISBN 978 0 580 53869 8
TCI/33
£71.00 members, £142.00 non-members £62.00 members, £124.00 non-members
RAE/1/-/2 B/546/9
BS EN ISO 11295:2010
Classification and information on design of BS EN 13301:2010
plastics piping systems used for renovation (BS 2000-504:2010)
supersedes BS EN 13689:2002 Bitumen and bituminous binders.
BS EN ISO 14937:2009
Determination of staining tendency of bitumen Sterilization of health care products. General
ISBN 978 0 580 61030 1
requirements for characterization of a
£71.00 members, £142.00 non-members supersedes the dual numbered standard sterilizing agent and the development,
BS EN 13301:2003, BS 2000-504:2003 validation and routine control of a sterilization
PRI/88/3
ISBN 978 0 580 62919 8 process for medical devices
£19.50 members, £26.00 non-members supersedes BS EN ISO 14937:2001
BS EN ISO 11737-2:2009 PTI/13 ISBN 978 0 580 57850 2
Sterilization of medical devices. Microbiological
Available from the Institute of Petroleum, see the £86.00 members, £172.00 non-members
methods. Tests of sterility performed in the
definition, validation and maintenance of a ’British Standards’ section foreword for ordering CH/198
sterilization process information.
supersedes BS EN ISO 11737-2:2000 BS EN 13302:2010
ISBN 978 0 580 57852 6 (BS 2000-505:2010) BS EN 14961-1:2010
£62.00 members, £124.00 non-members Bitumen and bituminous binders. Solid biofuels. Fuel specifications and classes.
CH/198 Determination of dynamic viscosity of General requirements
bituminous binder using a rotating spindle supersedes DD CEN/TS 14961:2005
apparatus
BS EN 12183:2009 ISBN 978 0 580 67082 4
Manual wheelchairs. Requirements and test supersedes the dual numbered standards
BS EN 13302:2003, BS 2000-505:2003, £86.00 members, £172.00 non-members
methods
BS EN 13702-2:2003, BS 2000-514:2003 and PTI/17
supersedes BS EN 12183:1999 BS EN 14896:2006, BS 2000-546:2006
ISBN 978 0 580 65399 5 ISBN 978 0 580 62920 4
£81.00 members, £162.00 non-members £19.50 members, £26.00 non-members
BS EN 15269-1:2010
CH/173/1 PTI/13
Extended application of test results for fire
Available from the Institute of Petroleum, see the resistance and/or smoke control for door,
’British Standards’ section foreword for ordering shutter and openable window assemblies,
BS EN 12184:2009 including their elements of building hardware.
information.
Electrically powered wheelchairs, scooters and General requirements
their chargers. Requirements and test methods BS EN ISO 13351:2009 no current standard is superseded
supersedes BS EN 12184:1999 Fans. Dimensions
ISBN 978 0 580 55699 9
ISBN 978 0 580 65400 8 supersedes the dual numbered standards £35.00 members, £70.00 non-members
£86.00 members, £172.00 non-members BS ISO 6580:2005, BS 6339:2005 and
BS EN ISO 13351:2008, BS 848-4:1997 FSH/22/5
CH/173/1
ISBN 978 0 580 65054 3
£43.00 members, £86.00 non-members
BS EN 12269-2:2010
Determination of the bond behaviour between MCE/17 BS EN 15304:2010
reinforcing steel and autoclaved aerated Determination of the freeze-thaw resistance of
concrete by the beam test. Long term test BS EN 13507:2010 autoclaved aerated concrete
Thermal spraying. Pre-treatment of surfaces of
supersedes BS EN 12269-2:2003 supersedes BS EN 15304:2007
metallic parts and components for thermal
ISBN 978 0 580 64059 9 spraying ISBN 978 0 580 63431 4
£35.00 members, £70.00 non-members supersedes BS EN 13507:2001 £43.00 members, £86.00 non-members
B/523 ISBN 978 0 580 63434 5 B/523
£35.00 members, £70.00 non-members
BS EN 12507:2005 STI/40
Transportation services. Guidance notes on the BS EN ISO 15487:2010
application of EN ISO 9001:2000 to the road BS EN ISO 13606-5:2010 Textiles. Method for assessing appearance of
transportation, storage, distribution and railway Health informatics. Electronic health record apparel and other textile end products after
goods industries communication. Interface specification domestic washing and drying
supersedes BS EN 12507:2000 no current standard is superseded supersedes BS EN ISO 15487:2001
ISBN 978 0 580 53848 3 ISBN 978 0 580 60129 3 ISBN 978 0 580 64861 8
£43.00 members, £86.00 non-members £62.00 members, £124.00 non-members £43.00 members, £86.00 non-members
TW/2 IST/35 TCI/82
BS EN 60730-2-4:2007
Automatic electrical controls for household and BS EN 61280-1-4:2010 BS EN 61850-6:2010
similar use. Particular requirements for thermal Fibre optic communication subsystem test Communication networks and systems for
motor protectors for motor-compressors of procedures. General communication subsystems. power utility automation. Configuration
hermetic and semi-hermetic type Light source encircled flux measurement description language for communication in
method electrical substations related to IEDs
supersedes BS EN 60730-2-4:1993 which remains
current supersedes BS EN 61280-1-4:2003 supersedes BS EN 61850-6:2004
ISBN 978 0 580 53783 7 ISBN 978 0 580 62538 1 ISBN 978 0 580 56718 6
£62.00 members, £124.00 non-members £71.00 members, £142.00 non-members £128.00 members, £256.00 non-members
CPL/72 GEL/86/3 PEL/57
CH/121/5
no current standard is superseded
ISBN 978 0 580 68499 9 DD CEN/TS 13307-2:2009
£62.00 members, £124.00 non-members Laminated and finger jointed timber blanks and
semi-finished profiles for non-structural uses.
PUBLISHED DOCUMENTS CPI/113
Production control
no current standard is superseded
PD ISO/TR 11633-1:2009 PD ISO/IEC TR 18018:2010 ISBN 978 0 580 67152 4
Health informatics. Information security Information technology. Systems and software £36.00 members, £72.00 non-members
management for remote maintenance of engineering. Guide for configuration
medical devices and medical information management tool capabilities B/543
systems. Requirements and risk analysis
no current standard is superseded
no current standard is superseded ISBN 978 0 580 61507 8
ISBN 978 0 580 67870 7 £71.00 members, £142.00 non-members DD CEN/TS 15366:2009
£62.00 members, £124.00 non-members Winter and road service area maintenance
IST/15 equipment. Solid absorbents intended for road
IST/35
usage
PD CLC/TR 50542:2010 no current standard is superseded
PD ISO/TR 11633-2:2009
Health informatics. Information security Railway applications. Communication means ISBN 978 0 580 66696 4
management for remote maintenance of between safety equipment and man-machine £36.00 members, £72.00 non-members
medical devices and medical information interfaces (MMI)
B/513
systems. Implementation of an information no current standard is superseded
security management system (ISMS)
ISBN 978 0 580 69150 8
no current standard is superseded £112.00 members, £224.00 non-members DD CEN/TS 15656:2009
ISBN 978 0 580 67942 1 Copper and copper alloys. Determination of
GEL/9
£93.00 members, £186.00 non-members phosphorus content. Spectrophotometric
method
IST/35
PD IEC/TR 61292-6:2010 no current standard is superseded
PD ISO/TR 11636:2009 Optical amplifiers. Distributed Raman ISBN 978 0 580 58364 3
amplification
Health informatics. Dynamic on-demand virtual £22.00 members, £44.00 non-members
private network for health information no current standard is superseded
NFE/34
infrastructure ISBN 978 0 580 68575 0
no current standard is superseded £62.00 members, £124.00 non-members
ISBN 978 0 580 61898 7 GEL/86/3 DD CEN ISO/TS 16634-2:2009
£93.00 members, £186.00 non-members Food products. Determination of the total
IST/35 nitrogen content by combustion according to
PD IEC/TR 61341:2010 the Dumas principle and calculation of the
Method of measurement of centre beam crude protein content. Cereals, pulses and
PD ISO/TR 12309:2009 intensity and beam angle(s) of reflector lamps milled cereal products
Health informatics. Guidelines for terminology
development organizations no current standard is superseded no current standard is superseded
ISBN 978 0 580 67888 2 ISBN 978 0 580 68962 8
no current standard is superseded
£35.00 members, £70.00 non-members £44.00 members, £88.00 non-members
ISBN 978 0 580 66531 8
£43.00 members, £86.00 non-members CPL/34/1 AW/4
IST/35
PD IEC/TR 62476:2010
PD CEN/TR 14383-5:2010 Guidance for evaluation of products with DD ISO/TS 21547:2010
Prevention of crime. Urban planning and respect to substance-use restrictions in electrical Health informatics. Security requirements for
building design. Petrol stations and electronic products archiving of electronic health records. Principles
no current standard is superseded no current standard is superseded no current standard is superseded
ISBN 978 0 580 63907 4 ISBN 978 0 580 62007 2 ISBN 978 0 580 63721 6
£86.00 members, £172.00 non-members £62.00 members, £124.00 non-members £82.00 members, £164.00 non-members
B/562 GEL/111 IST/35
BS EN 60384-2-1:2005 BS EN 60384-16-1:2005
Fixed capacitors for use in electronic Fixed capacitors for use in electronic UPDATED BRITISH
equipment. Blank detail specification: Fixed equipment. Blank detail specification: Fixed STANDARDS
metallized polyethylene-terephthalate film metallized polypropylene film dielectric D.C.
dielectric D.C. capacitors. Assessment levels E capacitors. Assessment levels E and EZ The following standards have been
and EZ CORRIGENDUM 1 amended and the amendments have
CORRIGENDUM 1 EPL/40X been incorporated into an updated
EPL/40X standard.
BS EN 60384-21:2004
BS EN 60384-3-1:2006 Fixed capacitors for use in electronic NOTE: Updated British Standards
equipment. Sectional specification: Fixed must be reordered as the
Fixed capacitors for use in electronic
surface mount multilayer capacitors of ceramic amendments are not available
equipment. Blank detail specification: Surface
dielectric, Class 1
mount fixed tantalum electrolytic capacitors separately.
with manganese dioxide solid electrolyte. CORRIGENDUM 1
Assessment level EZ EPL/40X
CORRIGENDUM 2
BS EN 60384-21-1:2004 BS 3951-2.1:1991+A5:2006
EPL/40X
Fixed capacitors for use in electronic (ISO 1496-1:1990+A5:2006)
Also incorporates Corrigenda 1 equipment. Blank detail specification: Fixed Freight containers. Specification and testing of
surface mount multilayer capacitors of ceramic series 1 freight containers. General cargo
BS EN 60384-4-1:2007 dielectric, Class 1. Assessment level EZ containers for general purposes
Fixed capacitors for use in electronic CORRIGENDUM 1 AMENDMENT 5
equipment. Blank detail specification: Fixed EPL/40X £62.00 members, £124.00 non-members
aluminium electrolytic capacitors with non-solid
electrolyte. Assessment level EZ TW/1
BS EN 60384-22:2004
CORRIGENDUM 1 Also incorporates Amendments 1, 2, 3 & 4
Fixed capacitors for use in electronic
EPL/40X equipment. Sectional specification: Fixed
surface mount multilayer capacitors of ceramic BS 4607-1:1984+A2:2010
dielectric, Class 2 Non-metallic conduit fittings for electrical
BS EN 60384-8:2005
CORRIGENDUM 1 installations. Specification for fittings and
Fixed capacitors for use in electronic
EPL/40X
components of insulating material
equipment. Sectional specification: Fixed
capacitors of ceramic dielectric, Class 1 AMENDMENT 2
BS EN 60384-22-1:2004 £43.00 members, £86.00 non-members
CORRIGENDUM 1
Fixed capacitors for use in electronic
EPL/40X PEL/213
equipment. Blank detail specification: Fixed
surface mount multilayer capacitors of ceramic Also incorporates Amendment 1
BS EN 60384-8-1:2005 dielectric, Class 2. Assessment level EZ
Fixed capacitors for use in electronic CORRIGENDUM 1 BS 4607-5:1982+A3:2010
equipment. Blank detail specification: Fixed EPL/40X Non-metallic conduit fittings for electrical
capacitors of ceramic dielectric, Class 1. installations. Specification for rigid conduits,
Assessment level EZ BS EN 61051-1:2008 fittings and boxes of insulating material
CORRIGENDUM 1 Varistors for use in electronic equipment. AMENDMENT 3
EPL/40X Generic specification £35.00 members, £70.00 non-members
CORRIGENDUM 1 PEL/213
EPL/40X Also incorporates Amendments 1 & 2
BS EN 60384-9:2005
Fixed capacitors for use in electronic BS 4A 113:1999
equipment. Sectional specification: Fixed Specification for cadmium-plated, mushroom- BS EN 453:2000+A1:2009
capacitors of ceramic dielectric, Class 2 headed, unified-thread, slotted drive, bolts Food processing machinery. Dough mixers.
CORRIGENDUM 1 Safety and hygiene requirements
CORRIGENDUM 2
EPL/40X AMENDMENT 1
ACE/12
£81.00 members, £162.00 non-members
Also incorporates Corrigenda 1
BS EN 60384-9-1:2005 MCE/3/5
Fixed capacitors for use in electronic BS 4A 114:1999
equipment. Blank detail specification: Fixed Specification for corrosion-resisting steel, BS EN 869:2006+A1:2009
capacitors of ceramic dielectric, Class 2. mushroom-headed, slotted-drive, bolts
Safety of machinery. Safety requirements for
Assessment level EZ (strength a class 880/1080)
pressure metal diecasting units
CORRIGENDUM 1 CORRIGENDUM 1
AMENDMENT 1
EPL/40X ACE/12 £81.00 members, £162.00 non-members
MCE/3/10
BS EN 60384-13:2006
Fixed capacitors for use in electronic BS EN 1057:2006+A1:2010
equipment. Sectional specification. Fixed Please Copper and copper alloys. Seamless, round
polypropylene film dielectric metal foil D.C. copper tubes for water and gas in sanitary and
capacitors do not send heating applications
CORRIGENDUM 2 confirmation AMENDMENT 1
EPL/40X £71.00 members, £142.00 non-members
Also incorporates Corrigenda 1
of
NFE/34/3
orders placed by
BS EN 60384-16:2005 BS EN 1495:1997+A2:2009
Fixed capacitors for use in electronic telephone
Lifting platforms. Mast climbing work platforms
equipment. Sectional specification: Fixed
metallized polypropylene film dielectric D.C.
as it can lead to AMENDMENT 2
capacitors duplication £93.00 members, £186.00 non-members
CORRIGENDUM 1 MHE/12
EPL/40X Also incorporates Amendment 1
AMENDMENT 1
£62.00 members, £124.00 non-members BS EN 12342:1998+A1:2009 BS EN 13544-3:2001+A1:2009
CH/121/5 Breathing tubes intended for use with Respiratory therapy equipment. Air
anaesthetic apparatus and ventilators entrainment devices
AMENDMENT 1 AMENDMENT 1
£62.00 members, £124.00 non-members £43.00 members, £86.00 non-members
BS EN 1870-5:2002+A1:2009
Safety of woodworking machines. Circular CH/121/5 CH/121/5
sawing machines. Circular saw benches/ Also incorporates Corrigenda 1
up-cutting cross-cut sawing machines BS EN 14279:2004+A1:2009
AMENDMENT 1 Laminated veneer lumber (LVL). Definitions,
£86.00 members, £172.00 non-members classification and specifications
BS EN 12472:2005+A1:2009
MTE/23 Method for the simulation of wear and AMENDMENT 1
corrosion for the detection of nickel release £62.00 members, £124.00 non-members
from coated items B/541
AMENDMENT 1
BS EN 1870-7:2002+A1:2009
£43.00 members, £86.00 non-members BS EN 14605:2005+A1:2009
Safety of woodworking machines. Circular
sawing machines. Single blade log sawing STI/53 Protective clothing against liquid chemicals.
machines with integrated feed table and Performance requirements for clothing with
manual loading and/or unloading liquid-tight (Type 3) or spray-tight (Type 4)
AMENDMENT 1 connections, including items providing
BS EN 12864:2001+A3:2009 protection to parts of the body only (Types PB
£86.00 members, £172.00 non-members Low-pressure, non adjustable regulators having [3] and PB [4])
MTE/23 a maximum outlet pressure of less than or
AMENDMENT 1
equal to 200 mbar, with a capacity of less than
or equal to 4 kg/h, and their associated safety £43.00 members, £86.00 non-members
devices for butane, propane or their mixtures PH/3/3
BS EN 1999-1-1:2007+A1:2009 AMENDMENT 3
Eurocode 9. Design of aluminium structures.
£106.00 members, £212.00 non-members BS EN 14910:2007+A1:2009
General structural rules
GSE/24 Garden equipment. Walk-behind combustion
AMENDMENT 1
Also incorporates Amendments 1 & 2 engine powered trimmers. Safety
£128.00 members, £256.00 non-members
AMENDMENT 1
B/525/9
£86.00 members, £172.00 non-members
BS EN 12965:2003+A2:2009 AGE/20
Tractors and machinery for agriculture and
BS EN ISO 11111-3:2005+A1:2009 forestry. Power take-off (PTO) drive shafts and
BS EN 15056:2006+A1:2009
Textile machinery. Safety requirements. their guards. Safety
Cranes. Requirements for container handling
Nonwoven machinery AMENDMENT 2 spreaders
AMENDMENT 1 £62.00 members, £124.00 non-members AMENDMENT 1
£43.00 members, £86.00 non-members AGE/6 £62.00 members, £124.00 non-members
TCI/33 Also incorporates Amendment 1 MHE/3
BS EN 50065-1:2001+A1:2010
BS EN ISO 11111-4:2005+A1:2009 BS EN 13001-1:2004+A1:2009 Signalling on low-voltage electrical installations
Textile machinery. Safety requirements. Yarn Cranes. General design. General principles and in the frequency range 3 kHz to 148,5 kHz.
processing, cordage and rope manufacturing requirements General requirements, frequency bands and
machinery AMENDMENT 1 electromagnetic disturbances
AMENDMENT 1 £71.00 members, £142.00 non-members AMENDMENT 1
£62.00 members, £124.00 non-members MHE/3 £62.00 members, £124.00 non-members
TCI/33 Also incorporates Corrigenda 1 & 2 PEL/205
BS EN 60335-2-24:2003+A2:2007 BS EN 1334:1996
Household and similar electrical appliances. BRITISH STANDARDS Domestic furniture. Beds and mattresses.
Safety. Particular requirements for refrigerating REVIEWED AND Methods of measurement and recommended
appliances, ice-cream appliances and ice-makers CONFIRMED tolerances
AMENDMENT 12 FW/0/2
£86.00 members, £172.00 non-members It is BSI policy for every standard to be
CPL/61/3 reviewed by the technical committee
Also incorporates Amendments 2 & 11 and responsible not more than five years after
publication, to establish whether it is still BS EN 1725:1998
Corrigenda 1
current and, if it is not, to identify and set Domestic furniture. Beds and mattresses. Safety
requirements and test methods
in hand appropriate action.
BS EN 60630:1998+A6:2009 FW/0/2
Maximum lamp outlines for incandescent lamps Confirmation indicates the continuing
AMENDMENT 6 currency of a standard.
£117.00 members, £234.00 non-members BS EN 12727:2000
Where any standard in this list has been
CPL/34/1 Furniture. Ranked seating. Test methods and
amended since publication, confirmation requirements for strength and durability
Also incorporates Amendments 1, 2, 3, 4 & 5
includes all amendments published to
FW/0
date. Reference to a particular
BS EN 60730-2-14:1997+A2:2008 amendment indicates that it is published
Automatic electrical controls for household and concurrently with the confirmation.
similar use. Particular requirements for electric
BS EN 14884:2005
actuators
Air quality. Stationary source emissions.
AMENDMENT 2 BS EN 597-1:1995 Determination of total mercury: automated
£43.00 members, £86.00 non-members Furniture. Assessment of the ignitability of measuring systems
mattresses and upholstered bed bases. Ignition
CPL/72 EH/2/1
source: smouldering cigarette
Also incorporates Amendments 1 & 11
FW/6
BS ISO 17321-1:2006
www.bsigroup.com/shop BS EN 1130-2:1996 Graphic technology and photography. Colour
Furniture. Cribs and cradles for domestic use. characterization of digital still cameras (DSCs).
Test methods Stimuli, metrology, and test procedures
CW/1/5 CPW/42
there still is a small level of use This standard has been withdrawn as it is
Declaration of obsolescence indicates that superseded by ISO 361:1975 which was never
the standard is not recommended for use adopted as a British Standard
in new equipment, but needs to be
retained for the servicing of existing
BRITISH STANDARDS BS 4248:2004
equipment that is expected to have a PROPOSED FOR Supersulfated cement
long working life. WITHDRAWAL B/516/6
Superseded by BS EN 15743:2010
A note of any objections to the proposals A note of any objections to these
below should be sent to Debbie Stead, withdrawals should be sent to Debbie
Head of Committee Service Centre – Stead, Head of Committee Service Centre BS 4540-2:1982
Operations, BSI Head Office, 389 Chiswick – Operations, BSI Head Office, 389 Sampling of spices and condiments. Method for
High Road, London W4 4AL or via email Chiswick High Road, London W4 4AL or preparation of a ground sample for analysis
to BSUKoperations.review@bsigroup.com via email to AW/7
by 30 June, 2010. BSUKoperations.review@bsigroup.com by Superseded by BS EN ISO 2825:2010
30 June, 2010.
BS 4899-1:1991
Where any standard in this list has been
BS 3455:1973 Guide to user’s requirements for technical
Glossary of terms used in nuclear science and
amended since publication, a proposal to manuals (based on the principles of BS 4884).
technology withdraw also includes all amendments Content
NCE/2
published to date. DS/1
This standard has been proposed for obsolescence This standard has been withdrawn as it conflicts
as the techniques are old but it is considered that with BS EN 62079:2001
there still is a small level of use BS EN 61300-2-30:1997
Fibre optic interconnecting devices and passive
components. Basic test and measurement BS 4899-2:1992
BS 3664:1963 procedures. Tests. Solar radiation Guide to user’s requirements for technical
Specification for film badges for personnel GEL/86/2
manuals (based on the principles of BS 4884).
radiation monitoring Presentation
This standard has been proposed for withdrawal as
DS/1
NCE/2 the European Standard has been proposed for
This standard has been proposed for obsolescence withdrawal by CENELEC This standard has been withdrawn as it conflicts
as the techniques are old but it is considered that with BS EN 62079:2001
there still is a small level of use
BS 5045-2:1989
BRITISH STANDARDS Transportable gas containers. Specification for
BS 3775:1964
Specification for counting trays (planchets) for
WITHDRAWN steel containers of 0.5 L up to 450 L water
capacity with welded seams
radioactive assay
If any standard in this list has been PVE/3/3
NCE/2 amended since publication, all Superseded by BS EN 13322-1:2003+A1:2006
This standard has been proposed for obsolescence amendments published to date are also
as the techniques are old but it is considered that withdrawn
there still is a small level of use BS 5950-3.1:1990+A1:2010
Structural use of steelwork in building. Design
in composite construction. Code of practice for
BS 3890:1965 BS 611-2:1990 design of simple and continuous composite
General recommendations for the testing, Petri dishes. Specification for plastics Petri beams
calibration and processing of radiation dishes for single use B/525/4
monitoring films LBI/36 Superseded by BS EN 1994-1-1:2004
NCE/2 Superseded by BS EN ISO 24998:2008
This standard has been proposed for obsolescence
BS 6200-3.22.2:1985
as the techniques are old but it is considered that
BS 1384-1:1985 Sampling and analysis of iron, steel and other
there still is a small level of use ferrous metals. Methods of analysis.
Photographic density measurements. Guide for
Determination of nitrogen. Steel:
terms, symbols and notations
spectrophotometric method
BS 4247-1:1981 CPW/42
ISE/102
Surface materials for use in radioactive areas. Superseded by BS ISO 5-1:2009
Methods of measuring and evaluating the Superseded by BS EN ISO 4945:2009
decontamination factor
NCE/2 BS 1384-2:2001 BS 6201-1:1982
This standard has been proposed for obsolescence Photographic density measurements. Geometric Fixed capacitors for use in electronic
as the techniques are old but it is considered that conditions for transmission density equipment. Methods of test
there still is a small level of use CPW/42 EPL/40X
Superseded by BS ISO 5-2:2009 Superseded by BS EN 60384-1:2009
BS 4247-2:1982
Surface materials for use in radioactive areas. BS 3385:1973 BS 6911-14:1998
Guide to the selection of materials Specification for direct reading pocket type Testing earth-moving machinery. Crawler
NCE/2 electroscope exposure meters machines. Performance requirements and test
procedures for braking systems
This standard has been proposed for obsolescence NCE/2
B/513/1
as the techniques are old but it is considered that This standard has been withdrawn as it is no longer
there still is a small level of use used by the industry Superseded by BS ISO 10265:2008
BS EN 1713:1998
Non-destructive testing of welds. Ultrasonic
BS CECC 30801:1993
BS QC 300400:1983
testing. Characterization of indications in welds Specification for harmonized system of quality
assessment for electronic components. Blank Harmonized system of quality assessment for
WEE/46 detail specification. Tantalum surface mounting electronic components. Fixed capacitors for use
Superseded by BS EN ISO 23279:2010 capacitors in electronic equipment. Sectional specification:
fixed metallized polyethylene terephthalate
EPL/40X film dielectric D.C. capacitors
Superseded by BS EN 60384-3-1:2006 EPL/40X
BS EN ISO 9445:2006
Superseded by BS EN 60384-2:2005
Continuously cold-rolled stainless steel narrow
strip, wide strip, plate/sheet and cut lengths. BS EN 50015:1998
Tolerances on dimensions and form Electrical apparatus for potentially explosive
atmospheres. Oil immersion “o”
ISE/105 BS QC 300401:1984
Superseded by BS EN ISO 9445-1:2010 and GEL/31/17 Specification for harmonized system of quality
BS EN ISO 9445-2:2010 Superseded by BS EN 60079-6:2007 assessment for electronic components. Fixed
capacitors for use in electronic equipment.
Blank detail specification: fixed metallized
DD CLC/TS 50131-4:2006 polyethylene terephthalate film dielectric D.C.
BS EN 12062:1998 Alarm systems. Intrusion and hold-up systems. capacitors. Assessment level E
Non-destructive examination of welds. General Warning devices EPL/40X
rules for metallic materials
GW/1/1 Superseded by BS EN 60384-2-1:2005
WEE/46 Superseded by BS EN 50131-4:2009
Superseded by BS EN ISO 17635:2010
BS EN 60318-2:1998 BS QC 300600:1991
Electroacoustics. Simulators of human head and Harmonized system of quality assessment for
BS EN 13689:2002 ear. An interim acoustic coupler for the electronic components. Fixed capacitors for use
Guidance on the classification and design of calibration of audiometric earphones in the in electronic equipment. Sectional specification
plastics piping systems used for renovation extended high-frequency range for fixed capacitors of ceramic dielectric, class 1
PRI/88/3 EPL/29 EPL/40X
Superseded by BS EN ISO 11295:2010 Superseded by BS EN 60318-1:2009 Superseded by BS EN 60384-8:2005
The following British Standards Where a work item has the temporary
implement International and/or European designation “BS EN XXXX”, it has not yet BS 8877
Standards which are currently under been allocated a standard number by the Online recruitment services. Code of practice
review to see if they should be confirmed, European standards body. SVS/9
revised or withdrawn.
BS 8909
Comments are welcome and should be BS 644:2009/Amendment 1 Specification for a sustainability management
sent to Debbie Stead, Head of Committee Timber windows. Fully finished factory- system for film
Service Centre – Operations, BSI Head assembled windows of various types. SDS/1/7
Office, 389 Chiswick High Road, London Specification
W4 4AL or via email to B/538/1 BS EN 3-8 (Revision)
BSUKoperations.review@bsigroup.com by Portable fire extinguishers. Additional
30 June, 2010, in order to be considered BS XXXX requirements to EN 3-7 for the construction,
by the relevant UK Committee. Water consumption in buildings. Code of resistance to pressure and mechanical tests for
practice extinguishers with a maximum allowable
pressure equal to or lower than 30 bar
B/504
BS EN 1236:1995 will supersede BS EN 3-8:2006
Fertilizers. Determination of bulk density (loose) BS 2869 (Revision) FSH/2
CII/37 Fuel oils for agricultural, domestic and
industrial engines and boilers. Specification BS EN 30-1-1:2008/Amendment 2
BS EN 1237:1995 will supersede BS 2869:2006 Domestic cooking appliances burning gas.
Fertilizers. Determination of bulk density Safety. General
PTI/2
(tapped) GSE/35
CII/37 BS 6164 (Revision)
Code of practice for safety in tunnelling in the BS EN WI 00207205
BS EN ISO 7837:2001 construction industry Non-domestic storage furniture. Test methods
Fertilizers. Determination of bulk density (loose) for the determination of strength, durability
will supersede BS 6164:2001
of fine-grained fertilizers and stability
B/513
CII/37 FW/0/4
BS 6259 (Revision)
BS EN 12878:2005 BS EN WI JW001001
Code of practice for the design, planning,
Pigments for the colouring of building materials installation, testing and maintenance of sound Energy audits. General
based on cement and/or lime. Specifications and systems SEM/1/1
methods of test
will supersede BS 6259:1997
STI/1 BS EN 593:2009/Amendment 1
EPL/100
Industrial valves. Metallic butterfly valves
BS EN 13366:2001 PSE/18/3
BS 6896 (Revision)
Fertilizers. Treatment with a cation exchange
resin for the determination of the chelated Specification for installation of gas-fired
micro-nutrient content and of the chelated overhead radiant heaters for industrial and BS EN 716-1:2008/Amendment 1
fraction of micro-nutrients commercial heating (2nd and 3rd family gases) Furniture. Children’s cots and folding cots for
will supersede BS 6896:2005 domestic use. Safety requirements
CII/37
GSE/30 CW/1/5
BS EN 13368-1:2001
Fertilizers. Determination of chelating agents in BS 7371-6:1998/Amendment 1 BS EN 716-2:2008/Amendment 1
fertilizers by ion chromatography. EDTA, HEDTA Coatings on metal fasteners. Specification for Furniture. Children’s cots and folding cots for
and DTPA hot dipped galvanized coatings domestic use. Test methods
CII/37 FME/9/1 CW/1/5
BS EN 15234-1
Solid biofuels. Fuel quality assurance. General BS EN 61300-2-52
PD CEN ISO/TR 20573 (Revision)
requirements Fibre optic interconnecting devices and passive
Footwear. Performance requirements for components. Basic test and measurement
will supersede DD CEN/TS 15234:2006 components for footwear. Heels and top pieces procedures. Tests. Bending test for cords
PTI/17 will supersede PD ISO/TR 20573:2006 GEL/86/2
TCI/69
BS EN 15502-1 BS EN 61439-4
Gas-fired heating boilers. General requirements BS EN 60335-2-40 (Revision) Low-voltage switchgear and controlgear
and tests Household and similar electrical appliances. assemblies. Particular requirements for
GSE/29 Safety. Particular requirements for electrical assemblies for construction sites (A CS)
heat pumps, air-conditioners and dehumidifiers
will supersede BS EN 60439-4:2004
BS EN 15502-2-1 will supersede BS EN 60335-2-40:2003+A2:2009
PEL/17/3
Gas-fired heating boilers. Specific standard for CPL/61/4
type C appliances and type B2, B3 and B5
appliances of a nominal heat input not BS EN 61753-071-2
exceeding 1000 kW BS EN 60603-7-1 (Revision) Fibre optic interconnecting devices and passive
Connectors for electronic equipment. Detail components performance standard. Non-
GSE/29
specification for 8-way, shielded, free and fixed connectorised single-mode fibre optic 1 x 2 and
connectors 2 x 2 spatial switches for category C. Controlled
DD CEN/TS 15916-1 environments
Copper and copper alloys. Determination of will supersede BS EN 60603-7-1:2009
GEL/86/2
tellurium content. Low tellurium content. Flame EPL/48
atomic absorption spectrometric method (FAAS)
NFE/34 BS EN 61753-088-2
BS EN 60734 (Revision) Fibre optic interconnecting devices and passive
Household electrical appliances. Performance. components performance standard. Non-
BS EN 16105 Hard water for testing connectorised single-mode fibre optic LAN
Paints and varnishes. Leaching of substances
will supersede BS EN 60734:2003 WDM devices with channel spacing of 800 GHz
from coatings. Laboratory immersion method
for category C. Controlled environments
CPL/59/1
STI/28
GEL/86/2
prEN ISO 1833-10 Please note the above document has been
To order visit Mixtures of triacetate or polylactide and certain issued for Formal Vote. Copies of the draft are
other fibres (method using dichloromethane) available on request from the contact point
www.bsigroup.com/shop (below).
prEN ISO 1833-11 Contact: Committee Service Centre
Mixtures of cellulose and polyester fibres Email: csc@bsigroup.com
(method using sulfuric acid) ACE/12
EN 2240-045:2010
Aerospace series. Lamps, incandescent. Lamp, EN 4632-003:2010 EN 13060:2004+A2:2010
code 714. Product standard Aerospace series. Weldability and brazeability Small steam sterilizers
of materials in aerospace constructions. LBI/35
ACE/6
Welding and brazing of homogeneous
assemblies of unalloyed and low alloy steels
EN 2240-046:2010 ACE/61 EN 13071-1:—
Aerospace series. Lamps, incandescent. Lamp, Stationary waste containers up to 5000 l, top
code 715. Product standard lifted and bottom emptied. General
EN 12254:2010 requirements
ACE/6
Screens for laser working places. Safety CORRIGENDUM 1:March 2010
requirements and testing
EN 2240-047:2010 to EN 13071-1:2008
PH/2
Aerospace series. Lamps, incandescent. Lamp, B/508/1
code 718. Product standard
EN 12371:2010
ACE/6
Natural stone test methods. Determination of EN 13071-2:—
frost resistance Stationary waste containers up to 5000 l, top
EN 2240-048:2010 lifted and bottom emptied. Additional
B/545
requirements for underground or partly
Aerospace series. Lamps, incandescent. Lamp,
underground systems
code 718 NPC. Product standard
EN 12417:— CORRIGENDUM 1:March 2010
ACE/6
Machine tools. Safety. Machining centres to EN 13071-2:2008
CORRIGENDUM 1:March 2010 B/508/1
EN 2240-049:2010 to EN 12417:2001+A2:2009
Aerospace series. Lamps, incandescent. Lamp,
code 757. Product standard MTE/1/1
EN 13128:—
ACE/6 Safety of machine tools. Milling machines
EN 12520:2010 (including boring machines)
Furniture. Strength, durability and safety. CORRIGENDUM 1:March 2010
EN 2240-050:2010 Requirements for domestic seating
Aerospace series. Lamps, incandescent. Lamp, to EN 13128:2001+A2:2009
FW/0/2
code 1064. Product standard
MTE/1/1
ACE/6
EN 12525:2000+A2:2010
Agricultural machinery. Front loaders. Safety EN 13128:2001+A2:2009
EN 2241:2010
AGE/6 Safety of machine tools. Milling machines
Aerospace series. Lamp caps. Dimensions (including boring machines)
ACE/6
MTE/1/1
EN 12663-2:2010
Railway applications. Structural requirements of
EN 2852:2010 railway vehicle bodies. Freight wagons
Aerospace series. Nuts, hexagonal, plain, EN 13523-8:2010
RAE/1/-/2 Coil coated metals. Test methods. Resistance to
normal height, normal across flats, heat
resisting steel passivated. Classification: salt spray (fog)
1100 MPa/650ºC EN 12871:2010 STI/27
ACE/12 Wood-based panels. Performance specifications
and requirements for load bearing boards for
use in floors, walls and roofs EN 13523-10:2010
EN 2954-001:2010 Coil coated metals. Test methods. Resistance to
B/541
Aerospace series. Macrostructure of titanium fluorescent UV radiation and water
and titanium alloy wrought products. General condensation
requirements EN 13020:2004+A1:2010 STI/27
ACE/61/-/49 Road surface treatment machines. Safety
requirements
EN 13523-21:2010
B/513
EN 3529:2010 Coil coated metals. Test methods. Evaluation of
Aerospace series. Steel FE-PM2701 outdoor exposed panels
(X2NiCoMo18-8-5). Vacuum induction melted EN 13023:2003+A1:2010 STI/27
and vacuum arc remelted. Solution treated Noise measurement methods for printing,
and precipitation treated. Forgings. a or paper converting, paper making machines and
D ≤ 150 mm. 1750 MPa ≤ Rm ≤ 2000 MPa auxiliary equipment. Accuracy grades 2 and 3 EN 13523-22:2010
ACE/61/-/15 MCE/3/9
Coil coated metals. Test methods. Colour
difference. Visual comparison
STI/27
EN 4619:2010 EN 13035-9:2006+A1:2010
Aerospace series. Inserts, MJ threads, self- Machines and plants for the manufacture,
locking, with self-broaching keys. Installation treatment and processing of flat glass. Safety EN 13523-29:2010
and removal procedure requirements. Washing installations Coil coated metals. Test methods. Resistance to
ACE/12 MCE/3/13
environmental soiling (dirt pick-up and striping)
STI/27
EN 4620:2010 EN 13035-11:2006+A1:2010
Aerospace series. Inserts, MJ threads, self- Machines and plants for the manufacture, EN 13747:2005+A2:2010
locking, with self broaching keys. Design treatment and processing of flat glass. Safety Precast concrete products. Floor plates for floor
standard requirements. Drilling machines systems
ACE/12 MCE/3/13 B/524
EN 13886:2005+A1:2010 EN 55016-1-1:2010
Food processing machinery. Cooking kettles CEN TECHNICAL (IEC CISPR 16-1-1:2010)
equipped with powered stirrer and/or mixer. SPECIFICATIONS Specification for radio disturbance and
Safety and hygiene requirements immunity measuring apparatus and methods.
MCE/3/5 Radio disturbance and immunity measuring
CEN/TS 13036-2:2010 apparatus. Measuring apparatus
EN 14351-1:2006+A1:2010 Road and airfield surface characteristics. Test GEL/210/12
methods. Assessment of the skid resistance of a
Windows and doors. Product standard,
performance characteristics. Windows and road pavement surface by the use of dynamic
measuring systems EN 60081:—
external pedestrian doorsets without resistance
to fire and/or smoke leakage characteristics B/510/5 (IEC 60081:1997/A4:2010)
Double-capped fluorescent lamps. Performance
B/538
specifications
CEN/TS 15989:2010 AMENDMENT 4:March 2010
EN 14397-1:2010 Firefighting vehicles and equipment. Symbols
Fertilizers and liming materials. Determination for operator controls and other displays
to EN 60081:1998
of carbon dioxide. Method for solid fertilizers CPL/34/1
FSH/17
CII/37
EN 60204-1:—
EN 14492-1:—
Cranes. Power driven winches and hoists. Power CENELEC PUBLICATIONS (IEC 60204-1:2005)
Safety of machinery. Electrical equipment of
driven winch
EUROPEAN RATIFIED TEXTS machines. General requirements
CORRIGENDUM 1:March 2010
CORRIGENDUM 1:February 2010
to EN 14492-1:2006+A1:2009 The documents listed below have recently to EN 60204-1:2006
MHE/3 been issued by CENELEC but have not yet
MCE/3
been published as BS ENs. BSI has an
EN 14492-2:— obligation to adopt all ENs and to
Cranes. Power driven cranes and hoists. Power withdraw any conflicting British EN 60204-11:—
driven hoists Standards (BSs) or parts of BSs. The (IEC 60204-11:2000)
CORRIGENDUM 1:March 2010 following will be implemented as BS ENs Safety of machinery. Electrical equipment of
to EN 14492-2:2006+A1:2009 or as amendments to BS ENs shortly. machines. Requirements for HV equipment for
Notification of their implementation will voltages above 1000 V A.C. or 1500 V D.C. and
MHE/3 not exceeding 36 Kv
be given in the BS EN Publications section
of the relevant edition of Update CORRIGENDUM 1:February 2010
EN 14655:2005+A1:2010 to EN 60204-11:2000
Standards.
Food processing machinery. Baguette slicers.
Safety and hygiene requirements MCE/3
MCE/3/5
EN 50085-2-3:2010
EN 60317-15:—
Cable trunking systems and cable ducting
EN 15434:2006+A1:2010 systems for electrical installations. Particular (IEC 60317-15:2004/A1:2010)
Glass in building. Product standard for requirements for slotted cable trunking systems Specifications for particular types of winding
structural and/or ultraviolet resistant sealant intended for installation in cabinets wires. Polyesterimide enamelled round
(for use with structural sealant glazing and/or aluminium wire, class 180
insulating glass units with exposed seals) PEL/213
AMENDMENT 1:March 2010
B/520/4
to EN 60317-15:2004
EN 50110-2:2010
GEL/55
EN 15663:— Operation of electrical installations. National
Railway applications. Definition of vehicle annexes
reference masses PEL/99 EN 60317-42:—
CORRIGENDUM 1:March 2010 (IEC 60317-42:1997/A1:2010)
to EN 15663:2009 EN 50132-1:2010 Specifications for particular types of winding
RAE/1/-/2
wires. Polyester-amide-imide enamelled round
Alarm systems. CCTV surveillance systems for copper wire, class 200
use in security applications. System
requirements AMENDMENT 1:March 2010
EN 15705:2010
Fertilizers. Determination of urea condensates GW/1/10 to EN 60317-42:1997
using high performance liquid chromatography GEL/55
(HPLC). Isobutylidenediurea and
crotonylidenediurea (method A) and methylen- EN 50491-2:2010
urea oligomers (method B) General requirements for Home and Building EN 60335-2-30:—
CII/37 Electronic Systems (HBES) and Building (IEC 60335-2-30:2009)
Automation and Control Systems (BACS).
Household and similar electrical appliances.
Environmental conditions
EN 15771:2010 Safety. Particular requirements for room heaters
IST/6
Vitreous and porcelain enamels. Determination CORRIGENDUM 1:March 2010
of surface scratch hardness according to the to EN 60335-2-30:2009
Mohs scale
EN 50495:2010 CPL/61/07
STI/36 Safety devices required for the safe functioning
of equipment with respect to explosion risks
GEL/31 EN 60335-2-89:2010
CEN REPORTS (IEC 60335-2-89:2010)
Household and similar electrical appliances.
EN 50519:2010 Safety. Particular requirements for commercial
CEN/TR 15932:2010 Assessment of workers’ exposure to electric and refrigerating appliances with an incorporated
Plastics. Recommendation for terminology and magnetic fields of industrial induction heating or remote refrigerant condensing unit or
characterisation of biopolymers and bioplastics equipment compressor
PRI/10 GEL/106 CPL/61/3
EN 60909-3:2010
(IEC 60909-3:2009)
EN 60704-1:2010 Short-circuit currents in three-phase A.C. EN 61226:2010
(IEC 60704-1:2010) systems. Currents during two separate (IEC 61226:2009)
Household and similar electrical appliances. Test simultaneous line-to-earth short-circuits and Nuclear power plants. Instrumentation and
code for the determination of airborne noise. partial short-circuit currents flowing through control important to safety. Classification of
General requirements earth instrumentation and control functions
CPL/59 PEL/73 NCE/8
ISE/111 £26.75 members, £44.58 non-members Will not be implemented as a British Standard. Is
CH/212 approved as suitable for use in the UK
Will be implemented as an identical British Standard
Will be implemented as an identical British Standard
£35.42 members, £59.04 non-members B/539 Will not be implemented as a British Standard. Is
Will be implemented as an identical British Standard approved as suitable for use in the UK
MCE/14/-/5
Will be implemented as an identical British Standard