Documentos de Académico
Documentos de Profesional
Documentos de Cultura
National Action Plan for Climate Change that aims to make cities sustainable through improving energy efficiency in buildings, managing solid waste and shifting to public transport
third, that neither the aspiration for the good life, nor the recognition of biophysical limits should preclude the search for greater justice in the world.
Urban Transport
In 2004, transport energy use amounted to 26 per cent of world energy use the transport sector was responsible for about 23 per cent of the GHG emissions (International Energy Agency, (IEA) 2006).
Each gallon of gasoline when burnt, pumps 28 pounds of CO2 in 1994, the transport sector was responsible for 12 per cent of the countrys total energy related CO2emissions (i.e. 679.47 million tonnes of CO2).
Integrated Energy Policy (IEP,) 2006 states that no economic substitutes are obvious for the transport sector at least till 2031-32.Therefore, energy ef ciency of vehicles, use of mass transport, pedestrianisation, cycling and transport demand management measures have to get high priority
So?
the growth of registered motor vehicles is increasing at four times the rate of growth of population in the six major Indian Metropolitan cities viz. Delhi, Ahmedabad, Bangalore, Hyderabad, Mumbai and Chennai. The share of public transport has declined from 69 per cent to 38 per cent in cities with a population of more than four million, from 1994 to 2007. the total fuel consumption of on road vehicles in India under the Business-As-Usual (BAU) scenario in 2035 will be over six times than that in 2005.
Cities with a high share of public and non-motorized transport need up to ten times less energy per person for passenger transport than cities where urban transport is mainly based on individual motorization. Another study carried out by ADB shows that on a per passenger basis, a car uses six times more energy than a bus. IEA estimates that there can be a 100 per cent difference in oil use, carbon dioxide emissions in a future scenario that is dominated by travel in high quality bus systems as compared to one that is dominated by private vehicles in Delhi.
Broadly speaking strategies for reducing GHG emissions in the transport sector could include the following: a) Greater Use of Non-Motorized Mode i) Investing in a segregated right of way for bicycles and pedestrians; (ii) Converting crowded areas like marketplaces into no-vehicle zones; (iii) Improving bicycle technology; (iv) Providing safer parking facilities for bicycles in workplaces; (v) Launching a public cycle Programme on PPP; (vi) Organizing cycle rickshaws through PPP and nally, (vii) promoting cycling and walking as healthy activities
b) Improving Access and Reducing Passenger and Freight-Kilometres c) Emphasis on Railways for Passenger and Freight Transpor d) Tough Fuel Economy Standards e) Alternate Fuels f) Battery Operated Vehicles (BOV) and Hybrid Vehicles (HV) g) Use of Hydrogen h) Compressed Natural Gas i) Bio-Fuels
Strengthening of Public Transport System through a Combination of Promotional, Regulatory and Fiscal Measures Reducing the Fuel Consumed per Passenger Travel through Modal Shift Improving Access to Goods and Services through an Integrated Urban Plan Integrating Inter-City Road Passenger Transport with Urban Transport Systems Shifting from Fossil Fuels to Natural Gas, Renewable and Alternate Fuels Establishing and Implementing Fuel Efficiency Standards for New as well as Existing Vehicles Facilitating R&D Activities Discouraging Diesel Propelled Personal Vehicles Exploring Technological Options Creating Public Awareness Multimodal Integration Comprehensive Mobility Planning and Management using Intelligent Transport Systems Central Financial Support Service Level Benchmarks
Strengthening of Public Transport System through a Combination of Promotional, Regulatory and Fiscal Measures
Promotional measures
encouraging private participation in the provision of transport services greater functional autonomy to state transport undertakings a quantum jump in the quality of city buses and city bus services introduction of state of the art ITS enabled modern buses
charging of fee for using congested parts of a city levying of high parking fees increasing vehicle registration charges and increasing fuel tax, pollution-based annual road tax
Fiscal measures
Control measures
physical restrictions on the use of personal vehicles in some corridors limiting the availability of parking space in city centres, using parking fee as a Travel Demand Management (TDM) measure, banning of parking on arterial roads a parking policy for the city, limiting the availability of road space for personal vehicles, restricting ownership of vehicles to mitigate emissions and making owning of parking space compulsory to acquire a new private vehicle
Reducing the Fuel Consumed per Passenger Travel through Modal Shift
Modal shift by providing all arterial roads more than 25 m right of way to have minimum of 2.5 m pedestrian path (with trees) and proper street furniture and 2.5 m bicycle path preferably in each direction as a mandatory measure.
Urban sprawl is not energy efcient or conducive to the provision of sustainable public transport system.
Shifting from Fossil Fuels to Natural Gas, Renewable and Alternate Fuels
Changing to fuels that have a lower carbon footprint in sufcient quantities would have a major impact on GHG emissions from on the road transport.
Establishing and Implementing Fuel Efficiency Standards for New as well as Existing Vehicles
Fuel economy standards to set benchmarks for efcient engine technology. Fuel economy labeling of vehicles to help increase consumers demand for fuel efcient vehicles. Fiscal incentives to be linked to fuel economy of the vehicles.
Multimodal Integration
For seamless connectivity over a widespread network of various public transport modes, the government should insist on setting up unied Metropolitan Transport Authorities (UMTA) in all one million plus cities.
The advances in information technology and electronics have to be used for setting up of Trafc Information Management Control Centers
COMPLIMENTARY ACTIONS
Urban transport is a key element of promoting sustainability of habitats. Towards this end, the mission proposes to support comprehensive mobility plans which would address issues related to transport planning and land use integration, optimization of various public transport modes, discouraging personal vehicles, development of appropriate parking norms and strategies, pedestrianization and strengthening of institutions. The comprehensive mobility plans would supplement the sustainable habitat standards in this regard.
SUSTAINABLE HABITAT
MANDATE
Under the NATIONAL ACTION PLAN for CLIMATE CHANGE: National Mission for Sustainable Habitat Scope Urban planning & Modal shift to public transport. Urban Transport Objectives of the mission: INTEGRATED LAND USE & TRANSPORTATION PLANS SHIFT FROM PRIVATE TO PUBLIC USE OF NON-MOTORISED FUEL EFFICIENCY. ALTERNATE FUELS.
Environmental Imperatives
1. Public Health: Worst cases of outdoor air and noise pollution More than a half of Indian cities have critical levels of particulates, while a third have hopped from low to moderately high levels of nitrogen dioxides. National Ambient Air Quality Standard: Annual Average PM10 - 60mg/m3 For Delhi, % Contribution to Air Pollution, Delhi 2008, PM10 - 198mg/m3 2001 Transport 3 2009, PM10 - 243mg/m 1% 3 2010, PM10 - 259mg/m Coal-based Thermal
8% 12% Power plants Industrial Units
13%
66%
Domestic
Other
Environmental Imperatives
2. Vehicles pose a special problem: Exposure to vehicle exhaust significant increase in respiratory symptoms and lung function impairment. Roadside exposure maximum affect on walkers and cyclists. Studies from Health Effect Institute people living and active up to 500 meters form road side are most vulnerable. National Ambient Air Quality Standard: Noise Levels -75 40 dBA (MaximumRange) For Delhi, 2001, Noise Level -78.61 Dba 2011, Noise Level -82.62 Dba (Increasing) 2021, Noise Level -84.81 Dba 3. Transport and climate: CO2 emissions from transport -Increasing at more than 6% per annum. Transport sector Vulnerable to extreme weather events like Mumbai flood -rainy months of 2009 Adaptation &Design strategy
Environmental Imperatives
4. Transport and energy security: Increase in fuel Consumption driven by light duty vehicles, mainly cars annual average growth 10% by 2030. Unaffordable Nearly 85% of our crude oil needs will be imported at exorbitant rates by 2030.
800
Annual consumption ( TMT)
759
Diesel Petrol
413 379 265 105 411 298 152 278 168 209 148 180 118 220 134 221 72
Kanpur
Environmental Imperatives
5. Equity and transportation planning:
Environmental Imperatives
5. Equity and transportation planning: 34% population engages in Walk-only trips for their daily travels, needs or errands. Only 14% population of Delhi drives private cars.
Poor Majority in Indian cities Travel pattern Linked with close urban form Short trip distances WALKABLE Exclusive systems Enhance urban poverty Undermine informal services that support city's economy -Undermine economic growth. More than 50% of people Do not drive cars Too poor, too young or old, disabled or just unwilling.
Approach
1. 2. 3. 4. 5. 6. 7. Increase access -- integrate land-use with transportation planning Focus on people not vehicles Increase share of walking and cycling Increase public safety Prevent trade-offs between efficiency and toxic emissions Reduce dependence on personal vehicles and eliminate hidden subsidies: Protect urban commons, green areas and open spaces:
8.
WALK
Walking is a zero-emission mode of transport that needs to be the primary focus of a sustainable habitat policy. WALKING needs emphasis because: 1. Walking is critical for success of public transport: 2. Walking will reduce vehicle use for short distance commuting 3. Walking and urban poor 4. Walking enhances urbanity, lifestyle, and health 5. Walking demands safe environment
Walkability Parameters
For SAFETY, COMFORT & CONVENIENCE: 1. Pedestrians remain at ground level. 2. Continuous unobstructed footpath on each side of all streets (ROW > 12m). Min. width 2m. Wider than 2m wherever required. 3. Intermittent buffers, bollards, etc Protection from encroachment 4. Continuous Railings Obstruction (Not acceptable) 5. ROW < 12m 125 Trees/km ROW > 12m 125 Trees/km /footpath @c/c 12m
(min. 2 M)
Walkability Parameters
For SAFETY, COMFORT & CONVENIENCE: 6. 7. 8. ROW 18m, Pedestrian traffic > 8000/hr Footpath higher than Carriageway HEIGHT < 150mm Barrier free ONLY PEDESTRIANS
For SAFETY, COMFORT & CONVENIENCE: 9. 5 Street Level Pedestrian Crossing /km @c/c 250m 10. Pedestrian refuge Min. Width = 1m, after crossing 7m one-way traffic, OR 10m of two-way traffic.
Walkability Parameters
Walkability Parameters
For SAFETY, COMFORT & CONVENIENCE: 10. Speed Limits: 50km/hr Arterial Roads (ROW 60-80m/ 45-60m) * Sub-arterial Roads (ROW 30-40m) 30km/hr Collector Roads (ROW 18-24m) Local Roads (ROW 12-20m) 20km/hr ROW 12m 11. Highway within city as Arterial Roads 12. Highway in Peripheral zone 4 crossings/km (if grade separated) 13. Final Road level Fixed (All roads)
Walkability Parameters
For SAFETY & ENJOYMENT: 1. Pedestrian access to buildings From main roads (primary road) Vehicular access to buildings From secondary roads (where possible) 2. Location of pedestrian access Shortest distance from nearest Bus Stop 3. Main building faade Facing the street 4. Compound walls Transparent above a ht. of 100cm (High security Govt. Buildings can be exempted) 5. Along high pedestrian volume areas Vending spaces/ Public utilities
For SAFETY & ENJOYMENT: 6. Building Located on the property line without setback OR Active use within setback. 7. Transparent edge (Min. 50% transparency) Eyes on the Street
Walk: Methods
Emphasize Pedestrian safety, comfort and convenience. Encourage Street-level activity and places to relax. Device Retrofitting and redevelopment strategies dedicated institutions for implementation, monitoring and auditing. Limit Speed on sub-arterial and local streets to permissible levels. Restrict Private vehicle oriented infrastructure investments. Pedestrian plans Mandatory and conditional to infrastructure funding. Approval and clearance Road projects adherence to pedestrian guidelines mandatory. Standardise formats for submission of project details available for public scrutiny. Road safety audits as per standards at different stages. Walkways and multi-modal integration: Management of the last mile. Zero tolerance policy for road casualties. Harmonise laws to protect pedestrians Comprehensive Road Users Act.
cycling
CYCLE
After walk, cycle is the second most accessible mode of transport for urban poor. Cycling needs emphasis because: 1. Reach and effectiveness of Public Transport can be improved Cycling 3-4 times faster than walking Catchment area of public transport stops 9-16 times larger. 2. Cycling can counter congestion bicycles use 1/5th of the space occupied by a motor-car. 3. Cycling promotion & improving road safety can result in a self reinforcing interaction of these two policies; the so-called safety by numbers effect. 4. Cycling can make cities more attractive -Cycling is often a preferred mode to enjoy the city, especially by tourists. 5. Contributes to improving air quality and mitigating climate change. 6. Noise reduction 7. Improved physical health
CYCLING
PARAMETERS Total Motor vehicle carriageway 10m (not ROW) Segregated bicycle tracks Width 2m one in each direction Motor vehicle carriageway < 10m (not ROW) No cycle tracks Traffic calming through design Speed 30 km/h At least 5 safe street crossing per km for bicycles with spacing between two crossings not more than 250m. Citywide cycle network of segregated lanes or traffic calmed streets that provides access to at least 80% of built plots. At least one cycle sharing system with 5,000 cycles and automated payment in cities with a population of over 5 lakhs Ridership of the system should be > 1000 trips per bicycle per year. Elevation of segregated cycle track above the carriageway (e.g. <150 mm) that allows for storm water runoff.
CYCLING
Methods Establish a dedicated unit for planning and audit of NMT facilities under UMTAs and urban local bodies. It should have the power to direct the implementation side engineering team of the urban local body. Design streets that emphasize cyclist safety, comfort and convenience Provide secure parking for cycles at transit stations, all public spaces, and commercial and institutional buildings Promote, implement and continue promotion of public cycle sharing Schemes Promote and facilitate use of nonmotorized vehicles (rickshaws and hand carts), passenger as well as freight, across the city.
CONNECT
Routes are getting circuitous for pedestrians and cyclists as well as motorized vehicles because of widely spaced streets that have poor interconnections. The goal of this principle is to: 1. Create dense street networks that are highly permeable to pedestrians, bicycles and public transport 2. Create pedestrian-priority streets with optimum ROW to encourage nonmotorized travel 3. Disperse high traffic volumes over multiple parallel human-scale streets rather than concentrating traffic on fewer major arterial streets
CONNECT
Parameters: Area of blocks surrounded by public access pedestrian/cyclist streets or pathways not to exceed 2 ha. In existing built-up areas, statutory planning to be done for breaking up blocks with an area of more than 2 Ha, to provide publicly accessible pedestrian thoroughfare. Create pedestrian-priority streets with optimum ROW to encourage nonmotorized travel. No new development allowed until local street grid is put in place which subdivides land into blocks of no more than 2 Ha. Vehicle access network should be set on a grid with no side exceeding (C/C) 250m with additional public access pedestrian thoroughfares cutting through the block, where possible. No urban streets with one way undivided motor vehicle carriageway width of over 10m
TRANSIT
Public transit can offer rapid and affordable mobility for all. The goal of this principle is to: 1. Ensure frequent, fast, reliable and affordable public transport network across the city. 2. Minimize the number of transfers needed for most passengers. 3. Prioritize integration of public transport, para transit and NMT modes over private modes. 4. Wherever possible, locate public transport stations, homes, jobs and services within walking distance of each other 5. Maximize public transport capacity in developed areas and along growth corridors In cities across the world, buses form the primary mode of public transport, even where extensive rail systems exist. Buses are flexible. Bus service can become inefficient when stuck in traffic. High demand corridors (>2000 passengers per hour per direction) should be converted into high-quality Bus Rapid Transit System (BRTS) corridors as part of a city wide network.
TRANSIT
Parameters for access: 1. High quality and high frequency rapid public transport within 800m (10-15 minute walking distance) of all residences in areas over 175 persons / ha of built area. 2. Facilitation of access to para-transit within 300m walking distance. 3. One or more high capacity, high speed transit corridor with dedicated transit lines within walking distance for 80 per cent of the population. 4. Deploy public bus service where present demand for public transport on any given corridor - > 1000 passengers per hour per direction. 5. Create Bus Rapid Transit System where demand (existing or potential for base year) - > 4000 passengers per hour per direction. 6. Develop modular design for growth in demand. Bus Rapid Transit Systems can be designed for up to a demand of 45000 passengers per hour per direction. 7. Develop metro rail system only if demand (existing or potential for base year) > 15000 passengers per hour per direction on given corridor. 8. All public facilities (institutional/ educational/ cultural etc) should be accessible by public transport within 400m walking distance
TRANSIT
Parameters for integration: 1. All public transport nodes (intersection of two public transit corridors/routes) should accommodate para-transit facilities. 2. Inter modal integration of formal public transport, para transit and cycle sharing should be within 200m from each other. 3. All public transport modes (including para transit and cycle sharing) to have integrated fare collection and passenger information. 4. Share of formal and informal public transport and NMT (excluding walk) shall be 80% of all vehicular trips.
Through spatial disincentives| fiscal disincentives eg. Parking controls, parking pricing along with increased taxes, Increasing due on car for entering busy area
The goals:
Reduce private motor vehicle use, especially during peak hours. Promote use of public transport, Para transit and NMT modes. Limit and price parking to discourage driving in high density/intensity urban areas Use network and time based congestion tax as a means of controlling number of vehicles on streets and accomplish free flow of traffic, thereby reducing emissions. Use tax measures to disincentives private modes and tap revenue for creation of UTF Use UTF for subsidizing public transport and promoting NMT use. Use technology (ITS) for demand management and efficient implementation/enforcement of above measures as well as capturing data for further planning.
Shared amenity.
- prioritize NMT
Parameters
Eliminate long-term street parking to ease congestion Limit off-street parking ratios in job centres with access to public transport to 0.2 spaces per worker Remove all parking-space minimums for residential buildings and establish citywide parking-space maximums consistent with targets for private car use. Institute a congestion-management system that limits car use in key urban and employment districts at peak traffic hours Charge tolls for use of overloaded roads and bridges and use this toll fee collection to support public transport. All commercial areas need parking charges by time of day and location to ensure high turnover.
Indicators of measurement
Percentage of on-street parking that is charged (should tend to 100%) Average off-street parking requirement for an average residential unit (should tend to 0%) Ratio of parking required within 1km of a transit node versus all other areas Number of on-street parking spaces converted to public transport and NMT Number of cars parked in a manner that encroaches on standard footpaths
2. programs/tools. . station area plans [ focus on growth around public transit nodes ]
. transfer of development rights . mobility plan by the UMTA to be a part of master plan . UMTA as a single window clearing house of transport project.
3. Data management for implementation of NMSH Parameters 4. Capacity building 5. Road map for clean and fuel efficient vehicles. 6. Reduce road based freight kilometers
Critical analysis
Also advanced technique like remote sensing techniques which have been very well deployed in various developed countries for the real life monitoring of emission from in-use vehicles and development of control policies are to be tried. this technique in can be used metro cities and subsequently its uses may be extended to other cities as well. Development of appropriate vehicle scrap page guidelines are very essential after implementation of old vehicle phasing out program in India. Within this purview Government should direct automotive industry to strengthen its R& D endeavors for making most of its automotive components as recyclable and to be reused while scrapping a vehicle and generate least possible pollution (solid waste, water & air pollution) during scrap page.
Awareness Raising
Public awareness and participation is a key to bringing about policy change. Widespread environmental education promotes understanding of linkages between pollution and health and encourages public involvement. Raising mass awareness among general public has been perceived as one of the major tool in the success of our vehicular pollution control policy framework. Private sector participation through innovative schemes like accepting delivery only from trucks that meet emission standards, Adopt a street campaigns, and air quality monitoring displays should be encouraged / strengthened. Media can also participate in awareness raising by disseminating air pollution related data.
Critical analysis
Energy efficiency markers are not satisfactory in comparison to the international standards. ICT implementation can reduce pollution and increase cost reduction. Rate of urbanization (roughly 31%) is basically population growth of the major cities and towns in India where as the growth in number of cities is not fairly similar. The success of the urban sustainability depends mainly on good governance and inclusive development with appropriate funding mechanism in place. World is talking about Urban Sustainability, but social aspects like safety and security is compromised at high level particularly in fastest growing cities like Delhi, Bangalore, etc. Ultimate question is What is the optimum size of a city ?
THANK YOU . . .