Documentos de Académico
Documentos de Profesional
Documentos de Cultura
Understanding Routing
Understanding Routing
1.- mobile-originating call (the calling subscriber is located in the exchange area)
2.- mobile-terminating call (the called subscriber is located in the exchange area)
3.- transit call (both call parties are located outside the exchange area)
ENRUTAMIENTO
Realizar el
Obtener Información Análisis de la Entregar (Route out) la
acerca de la llamada Obtener un llamada
información Destino
Características del
CGR entrante
Ruta de Voz Hunting Circuito
Saliente Saliente
Características del ANÁLISIS
Suscriptor A
Tratamiento
Especial
Dígitos Marcados
ENRUTAMIENTO
TIPOS DE LLAMADAS
1. Normal Calls
2. Emergency Calls
3. Service Calls
4. Data Calls
ENRUTAMIENTO
ORDEN DE EJECUCIÓN DE LOS ANÁLISIS
*6 is executed in mobile-originated and mobile-terminated call in the call setup phase, and in handover in the call active phase
*8 affects only the A interface functionality, not the MSC routing functionality
PREANÁLISIS
3.- Permitir o Restringir la presentación del CLI, mediante el discado de prefijos que
son reconocidos por el Pre-análisis
-Continuar la llamada
-Detener la llamada
-Re-ejecutar el preanálisis
-Enrutamiento por CLI
-Discado de números hacia PSTN
Enrutamiento Normal
-Normal Call (CM Digit Análisis)
-Emergency Call (Serv. Type = 0)
-Service Call (Serv. Type = 1-23) Enrutamiento hacia un
-Service Group Call Area Service Analysis
-No existe}
-Unknown NP
-ISDN Teleophony (E.164)
-Data NP (X.121)
-Telex NP (F.69)
-National Standard NP
-Private NP
-International
-National
-Local
MOC TOC
NORMAL PREANALYSIS
DEFAULT PREANALYSIS
ALARM
MOC TOC
MSC
Assignment
Request
AIF
Attributes ATTRIBUTE Priority Information
Element (PIE) BSC
ANALYSIS
Handover
Request
ORIGIN ANALYSIS
• Ordinary
• Payphone
• Priority
• Test
00 Tariff 0
01 Tariff 1
02 Tariff 2
03 Tariff 3
000 class 1. vehicle and portable
001 class 2. portable
010 class 3. hand-held 0..254
011 class 4. hand-held
100 class 5. hand-held
A pesar de que el “ORIGIN ANALYSIS” aplica sólo para MOC, el “CHARGING ORIGIN” es
también usado en TOC, este es provisto por el “Incoming CGR”.
ORIGIN ANALYSIS
MML: RV?
FUNCTION ANALYSIS
Release Message
Notification, Facility
or Internal
Message
ATTRIBUTE ANALYSIS
El propósito del Attribute Analysis es hacer un análisis de los atributos que puedan
influenciar el destino final de varios Sub-análisis.
Existen 3 tipos de Análisis de Atributos:
-Routing Attribute Analysis
-Charging Attribute Analysis
-EOS Attribute Analysis
CONTINUATION
SUBANALYSIS
Final Res.
ROUTING ATTRIBUTE ANALYSIS
Attribute
No afecta los
MSRN, ni números Digit
que hayan sido Intermediate
modificados por
Analysis
Announcement
Central Memory. Tree
Hello
Digit Analysis
Destination
DEFAULT FINAL RESULT: No cambiar el Tree del Digit Analysis y ningún Anuncio para el suscriptor.
CHARGING ATTRIBUTE ANALYSIS
Attribute
Charging Analysis
Charging
Destination
Attribute
Cause Code
EOS EOS Attribute
Analysis Analysis
Se ejecuta sólo si
el EOS
ANALYSIS lo
indica. Puede
afectar llamadas Execute Alternative
de Emergencia. Subdestination Analysis
Resultado: Resultado:
RUTA NORMAL RUTA ESPECIAL
(ROU) (SPR)
DIGIT ANALYSIS (ROUTE & CHARGING ANALYSIS)
-Modificar el Número