Documentos de Académico
Documentos de Profesional
Documentos de Cultura
Diciembre 2009
3. Instalación de Equipos
4. Comisionamiento de Equipos
Proyecto IP-RAN Claro Perú All Rights Reserved © Alcatel-Lucent 2009, #####
1 Solución IP-RAN para la Red de Claro
Proyecto IP-RAN Claro Perú All Rights Reserved © Alcatel-Lucent 2009, #####
Objetivos y Alcance
Objetivo
Brindar a Claro Perú la solución a su necesidad futura de
Ancho de Banda de 45 Mbps por cada nodo B (3G y 4G).
Proyecto IP-RAN Claro Perú All Rights Reserved © Alcatel-Lucent 2009, #####
Premisas de Diseño de Red
Hacia Chimbote
Hijos de
Jerusalen
Segundo Polo
Morro Solar
Hacia Ica
Proyecto IP-RAN Claro Perú All Rights Reserved © Alcatel-Lucent 2009, #####
Topología de Referencia Red 3G Claro Perú
Prioridad de Implementación
Red Futura
Node B
BTS
Node B Node B
Eth
BTS BTS BSC
E1
Node B
BTS ETh Eth
Anillos Fibra Óptica
E1 RNC
E1 Fibra Óptica Lineal
Acceso
Eth E1
Eth MW RNC
Node B
Node B
BTS
BTS
Agregación (28 sitios) BSC
F.O.= 22 sitios
MW= 6 sitios Concentración (5 Sitios)
CAPA 2 CAPA 3
Proyecto IP-RAN Claro Perú All Rights Reserved © Alcatel-Lucent 2009, #####
Topología de la red propuesta – Lima Fase 1
3 anillos de FO, conformados por nodos de concentración 7750 SR12 (en los sites
donde hay RNCs) y 15 nodos de agregación 7750 SR7. Cada 7750 SR7/12 está
colocalizado con un nodo 7705 SAR8.
En dos de estos anillos, los routers 7750 SR7/12 van conectados a equipos DWDM.
En el tercer anillo, la conexión de los routers es sobre “fibra oscura”.
Proyecto IP-RAN Claro Perú All Rights Reserved © Alcatel-Lucent 2009, #####
Anillos de FO en Lima
Hacia Chimbote Hijos de
Jerusalem
La Milla
Aeropuerto
Palomar
Huiracocha
Malecón La Marina
Camacho
Anillo 2
10 G
7750 SR7 Pardo II
UPC
Segundo Polo
7750 SR12
Hacia Ica
Proyecto IP-RAN Claro Perú All Rights Reserved © Alcatel-Lucent 2009, #####
Nodos de concentración en Lima: La Milla, 1er Polo y 2do Polo (7750 SR12)
Hacia Chimbote
La Milla
7750 SR12
Primer Polo
Segundo Polo
Hacia Ica
Proyecto IP-RAN Claro Perú All Rights Reserved © Alcatel-Lucent 2009, #####
Nodos de agregación en Lima: 15 nodos 7750 SR7 en 3 anillos
Hacia Chimbote
Hijos de
Jerusalem
Choque
La Pampilla
7750 SR7
Palomar
Aeropuerto La Milla
Huiracocha
Univ San
Cada 7750 SR7 va colocalizado con Martín
La Perla
un 7705 SAR 8.
Los Osos
Sucre Primer
Polo
Camacho
Malecón
La Marina
UPC
Pardo II
Segundo
Polo
Morro
Solar
Hacia Ica
Proyecto IP-RAN Claro Perú All Rights Reserved © Alcatel-Lucent 2009, #####
Agregación del tráfico 3G
El tráfico de los NodosB ingresa al dominio MPLS en los routers 7705 SAR8. Los
NodosB con uplink Ethernet ingresarán vía un puerto FE 100 Mbps. Los NodosB
con uplink en E1s ATM IMA, ingresarán vía la tarjeta ASAP del 7705 SAR8.
El tráfico ATM IMA es encapsulado en una trama Ethernet por el 7705 SAR8,
desde donde es transportado al concentrador correspondiente (7750 SR12),
desencapsulado en la tarjeta ASAP e ingresado al RNC vía un puerto STM-1.
Proyecto IP-RAN Claro Perú All Rights Reserved © Alcatel-Lucent 2009, #####
Agregación del tráfico 3G (cont.)
LIU0030 LI0281
2 E1
LIU0429
4 E1
2 E1 LIU0732
LI1130
Sucre 6 E1
Tizón
GEth
Anillo DWDM LIU0208
2 E1 2 E1
MW PDH
LIU0075
LIU1016
7750 SR7/12
7705 SAR8
El 7705 SAR8 ubicado en el site LI0075 (Tizón) agrega 7 NodosB: uno con uplink
9500 MPR
en Ethernet (colocalizado en el mismo site) y 6 con uplink ATM IMA, que totalizan
NodoB 18 E1s (que llegan hasta Tizón vía enlaces de microondas PDH). Por lo que este
7705 SAR8 necesita dos tarjetas ASAP (cada una de 16 puertos).
Proyecto IP-RAN Claro Perú All Rights Reserved © Alcatel-Lucent 2009, #####
Agregación del tráfico 2G
El tráfico de las BTSs ingresa al dominio IP en los radios de paquetes MPR. Los
E1s de las BTSs que llegan al MPR son ingresados a la IDU de este equipo, donde
son encapsulados en una trama Ethernet usando MEF-8.
Proyecto IP-RAN Claro Perú All Rights Reserved © Alcatel-Lucent 2009, #####
Agregación del tráfico 2G (cont)
1E1
LI0236
LI0385
2 E1
Aeropuerto
IDU IDU
GigE
Anillo DWDM
LI0195 1 E1
4 E1
LI0195
LI0605
BTS
MW PDH
El MPR ubicado entre Gambeta (LI0195) y Aeropuero debe agregar en Gambeta
7750 SR7/12 el tráfico de 4 BTSs, que totalizan 7 E1s (la capacidad de cada IDU MPR en el
proyecto es de 32 o 64 E1s). Este tráfico es encapsulado en MEF8 y
7705 SAR8 transportado sobre GigE hasta el nodo 7750 SR7 en Aeropuerto.
9500 MPR
Proyecto IP-RAN Claro Perú All Rights Reserved © Alcatel-Lucent 2009, #####
Gestión
ACTIVE
STANDBY
Proyecto IP-RAN Claro Perú All Rights Reserved © Alcatel-Lucent 2009, #####
2
Presentación de Equipos
7750SR12/7750SR7/7705SAR8
Proyecto IP-RAN Claro Perú All Rights Reserved © Alcatel-Lucent 2009, #####
7750 SR FAMILY
SR-7
SR-12
SR-1
Proyecto IP-RAN Claro Perú All Rights Reserved © Alcatel-Lucent 2009, #####
7750 SR FAMILY
SR-12
SR-7
SR-1
Integrated switch fabric/control, 7 Slots (5 IOM, 2 SF/CPM) 12 Slots (10 IOM, 2 SF/CPM)
IOM, and power 100 Gbps full duplex system 200 Gbps system capacity
20 Gbps full duplex capacity 400 Gbps full duplex
system capacity 400 Gbps switch fabric/control switch fabric/control
Two 10 Gbps MDAs Fabric/control redundancy Ten 20 Gbps IOMs
Power redundancy Five 20 Gbps IOMs Twenty 10 Gbps MDAs
Ten 10 Gbps MDAs Power redundancy
Power redundancy
Proyecto IP-RAN Claro Perú All Rights Reserved © Alcatel-Lucent 2009, #####
7750 SR7(1)
Features
Seven slots (5 IOM, 2 SF/CPM)
100 Gbps system capacity
5 Hot-swappable IOMs
10 hot-swappable MDAs (10 Gbps each)
2 hot-swappable 400 Gbps switch fabric/control
modules
Hot-swappable cooling fans
Fabric/control redundancy with 2 SF/CPMs
Power redundancy with 2 power supplies
Proyecto IP-RAN Claro Perú All Rights Reserved © Alcatel-Lucent 2009, #####
7750 SR7(2)
Chassis
Proyecto IP-RAN Claro Perú All Rights Reserved © Alcatel-Lucent 2009, #####
7750 SR7(3)
Front View
1. IOM with installed MDAs
2. Blank panel installed in empty IOM
slot
3. SF/CPM
4. ESD plug receptacle
5. AC PSMs (AC-to-DC power
converter)
6. IOM ejector lever
7. Compact flash slot #3 locking
mechanism
8. Power supply module LEDs
Proyecto IP-RAN Claro Perú All Rights Reserved © Alcatel-Lucent 2009, #####
7750 SR7(4)
Rear View
1. Filter tray faceplate
2. Fan tray faceplate
3. Rack mounting brackets
4. VDC power cable
5. RTN power cable
6. DC PEM
7. Circuit breaker (ON/OFF)
8. PEM handle
Proyecto IP-RAN Claro Perú All Rights Reserved © Alcatel-Lucent 2009, #####
7750 SR12(1)
Features:
12 slots (10 IOM, 2 SF/CPM)
200 Gb/s system capacity
20 hot-swappable MDAs
400 Gb/s switch fabric/control
Hot-swappable cooling fans
Switch fabric/control redundancy when
two SF/CPMs installed
Power redundancy when two power
supplies installed
Proyecto IP-RAN Claro Perú All Rights Reserved © Alcatel-Lucent 2009, #####
7750 SR12(2)
Chassis
Proyecto IP-RAN Claro Perú All Rights Reserved © Alcatel-Lucent 2009, #####
7750 SR12(3)
Front View
Cable management system
Chassis slot numbers
MDA (installed)
Impedance panel
SF/CPM
MDA blank panel
Rack mounting brackets
Air vent
ESD plug
Compact flash slots
Compact flash slot 3 (cf3:)
Proyecto IP-RAN Claro Perú All Rights Reserved © Alcatel-Lucent 2009, #####
7750 SR12(4)
Rear View
Grounding studs
Rack mounting brackets
Impeller (fan) trays
VDC studs for DC power cable
RTN studs for DC power cable
OFF/ON DC switch
PEM-3 LED
DB-25 connector (status)
DC PEM-3s.
The top slot is referred to as PEM slot 1.
The lower slot is referred to as PEM slot
2.
Proyecto IP-RAN Claro Perú All Rights Reserved © Alcatel-Lucent 2009, #####
7750 SR HARDWARE(1)
CPM Card
Active/Standby roles
Access and Storage
1. Console Port
2. Management Port
3. Compact Flash Slots
1 2 3
Proyecto IP-RAN Claro Perú All Rights Reserved © Alcatel-Lucent 2009, #####
7750 SR HARDWARE(2)
IOM/MDA/SFP
Proyecto IP-RAN Claro Perú All Rights Reserved © Alcatel-Lucent 2009, #####
7750 SR HARDWARE(3)
Proyecto IP-RAN Claro Perú All Rights Reserved © Alcatel-Lucent 2009, #####
7750 SR HARDWARE(4)
10 GigE MDA
Single port
Optical interface
Proyecto IP-RAN Claro Perú All Rights Reserved © Alcatel-Lucent 2009, #####
7750 SR HARDWARE(5)
SONET/SDH MDA
8 or 16 ports
SFP optical interface
Proyecto IP-RAN Claro Perú All Rights Reserved © Alcatel-Lucent 2009, #####
Provisionamiento de Tarjetas y MDAs(1)
•1 2
•Slot
•1
2
3 •1
A
•MDA
A B
•2
1–2
MDA 3 – 4
5–6
Proyecto IP-RAN Claro Perú All Rights Reserved © Alcatel-Lucent 2009, #####
3-32 | Introducción al 7750 SR y 5620 SAM | Noviembre de 2008
7705 SAR-8: Physical Layout
Fully redundant system in a compact form
2 RU
High
66mm
Proyecto IP-RAN Claro Perú All Rights Reserved © Alcatel-Lucent 2009, #####
Control Switching Module (CSM)
Proyecto IP-RAN Claro Perú All Rights Reserved © Alcatel-Lucent 2009, #####
System Hardware
Node Management
1 2
Proyecto IP-RAN Claro Perú All Rights Reserved © Alcatel-Lucent 2009, #####
System Hardware
Node Management – Ethernet Port
Management port
Proyecto IP-RAN Claro Perú All Rights Reserved © Alcatel-Lucent 2009, #####
System Hardware
Node Management – Console Port
Console port
Proyecto IP-RAN Claro Perú All Rights Reserved © Alcatel-Lucent 2009, #####
System Hardware
Media Dependant Adaptor (MDA)
7705 SAR supports two types of MDA
CSM
ASAP
Ethernet
Proyecto IP-RAN Claro Perú All Rights Reserved © Alcatel-Lucent 2009, #####
16-port T1/E1 Any Service Any Port (ASAP) Adaptor Card
16 ports of T1 TDM PW
Per-port configurable as access (base CESoPSN (Structured)
station-facing) or network links SAToP (Unstructured)
ATM PW
Layer 2 N:1 VPC cell mode
N:1 VCC cell mode
TDM N-cell concatenations
ATM/IMA (ATM-F v1.1)
CoS policy
Bundle up to 8 links
ATM QoS (CBR, rt-nrt/VBR, UBR/MCR) ATM virtual connection
ML-PPP (RFC1661/1990) Service-categories
LCP/IPCP
CHAP authentication
Bundle up to 8 links
Proyecto IP-RAN Claro Perú All Rights Reserved © Alcatel-Lucent 2009, #####
Ethernet Adaptor Card
Layer 2
Services
Ethernet PW
Tagged mode
Raw mode
Proyecto IP-RAN Claro Perú All Rights Reserved © Alcatel-Lucent 2009, #####
3
Instalación de Equipos
7750SR12/7750SR7/7705SAR8
Proyecto IP-RAN Claro Perú All Rights Reserved © Alcatel-Lucent 2009, #####
7750 SR-12 System Installation Process
To install the 7750 SR-12 system, perform the installation procedures in the following order:
Step 1 Prepare the site. For more information.
Step 2 Unpack the chassis and components.
Step 3 Rack mount the chassis.
Step 4 If you are converting AC power, install the AC power shelves and AC power rectifiers.
Step 5 Make power connections.
Step 6 (Optional) You can either turn on the power now or after you install the SF/CPM, IOMs,
and MDAs.
Step 7 Install the SF/CPM(s).
Step 8 Establish console/Telnet connections.
Step 9 Preconfigure card slot, IOM, MDA, and port information.
Step 10 Install at least one IOM.
Step 11 Install at least one MDA.
Step 12 Install impedance panels in all empty IOM slots.
Step 13 Connect network cables.
Proyecto IP-RAN Claro Perú All Rights Reserved © Alcatel-Lucent 2009, #####
Chassis Specifications (7750SR12)
Proyecto IP-RAN Claro Perú All Rights Reserved © Alcatel-Lucent 2009, #####
Environmental Specifications (7750SR12)
Proyecto IP-RAN Claro Perú All Rights Reserved © Alcatel-Lucent 2009, #####
Electrical Characteristics (7750SR12)
Proyecto IP-RAN Claro Perú All Rights Reserved © Alcatel-Lucent 2009, #####
Rack Clearance Requirements (7750SR12)
Proyecto IP-RAN Claro Perú All Rights Reserved © Alcatel-Lucent 2009, #####
Unpacking (7750SR12)
Proyecto IP-RAN Claro Perú All Rights Reserved © Alcatel-Lucent 2009, #####
Installing the Cable Management System (7750SR12)
Proyecto IP-RAN Claro Perú All Rights Reserved © Alcatel-Lucent 2009, #####
Making the Ground Wire Connection (7750SR12)
Proyecto IP-RAN Claro Perú All Rights Reserved © Alcatel-Lucent 2009, #####
Rack Mounting the Chassis (7750SR12)
Proyecto IP-RAN Claro Perú All Rights Reserved © Alcatel-Lucent 2009, #####
7750 SR-7 SYSTEM INSTALLATION PROCESS
To install the 7750 SR-7 system, perform the installation procedures in the following
order:
Step 1 Prepare the site.
Step 2 Unpack the chassis and components.
Step 3 Mount the chassis.
Step 4 Prepare the chassis ground cables and make the grounding connections.
Step 5 Install DC PEMs or AC PSMs and AC PEMs.
Step 6 Prepare power cords. Make power connections.
Step 7 (Optional) You can either turn on the power modules now or after you install the
SF/
CPM, IOMs, and MDAs.
Step 8 Install SF/CPM(s).
Step 9 Preconfigure card slot, IOM, MDA, and port information.
Step 10 Install at least one IOM.
Step 11 Install at least one MDA.
Step 12 Connect network cables.
Proyecto IP-RAN Claro Perú All Rights Reserved © Alcatel-Lucent 2009, #####
Chassis Specifications (7750SR7)
Proyecto IP-RAN Claro Perú All Rights Reserved © Alcatel-Lucent 2009, #####
Environmental Specifications (7750SR7)
Proyecto IP-RAN Claro Perú All Rights Reserved © Alcatel-Lucent 2009, #####
Electrical Characteristics (7750SR7)
Proyecto IP-RAN Claro Perú All Rights Reserved © Alcatel-Lucent 2009, #####
Rack Clearance Requirements (7750SR7)
Proyecto IP-RAN Claro Perú All Rights Reserved © Alcatel-Lucent 2009, #####
Unpacking The Chassis (7750SR7)
Proyecto IP-RAN Claro Perú All Rights Reserved © Alcatel-Lucent 2009, #####
Rack Mounting The Chassis (7750SR7)
Proyecto IP-RAN Claro Perú All Rights Reserved © Alcatel-Lucent 2009, #####
Making The Ground Wiring Connection (7750SR7)
Proyecto IP-RAN Claro Perú All Rights Reserved © Alcatel-Lucent 2009, #####
Installing Power Modules (7750SR7)
Proyecto IP-RAN Claro Perú All Rights Reserved © Alcatel-Lucent 2009, #####
Installing The SF/CPM (7750SR7)
Proyecto IP-RAN Claro Perú All Rights Reserved © Alcatel-Lucent 2009, #####
Using The Compact Flash Slot #3 Locking Mechanism (7750SR7)
Proyecto IP-RAN Claro Perú All Rights Reserved © Alcatel-Lucent 2009, #####
Installing IOMS and MDAS (7750SR7)
Proyecto IP-RAN Claro Perú All Rights Reserved © Alcatel-Lucent 2009, #####
Installing an MDA on AN IOM (7750SR7)
Proyecto IP-RAN Claro Perú All Rights Reserved © Alcatel-Lucent 2009, #####
SAR 8 System Installation Process
To install the 7705 SAR-8 system, perform the installation procedures in the
following
order:
Step 1. Prepare the site.
Step 2. Unpack the chassis.
Step 3. Mount and ground the chassis.
Step 4. Prepare and connect the DC input power cables.
Step 5. Install the components.
Step 6. Power up the system.
Step 7. Connect the network cables.
Step 8. Provision (preconfigure) the system.
Proyecto IP-RAN Claro Perú All Rights Reserved © Alcatel-Lucent 2009, #####
Chassis Clearance Specifications
Proyecto IP-RAN Claro Perú All Rights Reserved © Alcatel-Lucent 2009, #####
Fan Module
The Fan module has eight fans mounted on its circuit board. The Fan module
must always beinstalled and fully operational while the 7705 SAR-8 is
powered up. During routinemaintenance and Fan module replacement, the
system can operate safely for up to 4 minutes without the Fan module
installed. The Figure illustrates the installation of the Fanmodule.
Proyecto IP-RAN Claro Perú All Rights Reserved © Alcatel-Lucent 2009, #####
Chassis Specifications
Proyecto IP-RAN Claro Perú All Rights Reserved © Alcatel-Lucent 2009, #####
Environmental Specifications
Proyecto IP-RAN Claro Perú All Rights Reserved © Alcatel-Lucent 2009, #####
Component Power Consumption
Proyecto IP-RAN Claro Perú All Rights Reserved © Alcatel-Lucent 2009, #####
Chassis Ground Wiring
Proyecto IP-RAN Claro Perú All Rights Reserved © Alcatel-Lucent 2009, #####
Chassis Ground Wiring
Proyecto IP-RAN Claro Perú All Rights Reserved © Alcatel-Lucent 2009, #####
DC Power Connections
Proyecto IP-RAN Claro Perú All Rights Reserved © Alcatel-Lucent 2009, #####
16-port T1/E1 ASAP Adapter Card Connectors and LEDs
Proyecto IP-RAN Claro Perú All Rights Reserved © Alcatel-Lucent 2009, #####
4
Comisionamiento de Equipos
7750SR12/7750SR7/7705SAR8
Proyecto IP-RAN Claro Perú All Rights Reserved © Alcatel-Lucent 2009, #####
Provisionamiento de Tarjetas y MDAs(2)
Provisionando IOM
Proyecto IP-RAN Claro Perú All Rights Reserved © Alcatel-Lucent 2009, #####
Provisionamiento de Tarjetas y MDAs(3)
Proyecto IP-RAN Claro Perú All Rights Reserved © Alcatel-Lucent 2009, #####
Provisionamiento de Tarjetas y MDAs(4)
Provisionando MDA
Proyecto IP-RAN Claro Perú All Rights Reserved © Alcatel-Lucent 2009, #####
Provisionamiento de Tarjetas y MDAs(5)
Proyecto IP-RAN Claro Perú All Rights Reserved © Alcatel-Lucent 2009, #####
www.alcatel-lucent.com
Proyecto IP-RAN Claro Perú All Rights Reserved © Alcatel-Lucent 2009, #####