Documentos de Académico
Documentos de Profesional
Documentos de Cultura
Remark
When testing L2600 Sector 2,
The RS power can be set as below:
S1: 4
S2: 13.5
S3: 4
When testing L1800 Sector 2,
The RS power can be set as below
S1: shut down
S2: 13.5
S3: shut down
PA & PB Configuration
1. Start NE . Right click on “1”
choose configuration
management
2. Right Click on “2” and
choose data batch
3. Insert Site name
4. Click “4”
5. Double click on “E-Utran
FDD cell
6. Choose the sector you want
to change
7. Click Modify
8. After Modify, click Save
button
9. Synchronize all changes
( can refer to the slide-
Reserved mode
configuration)
The configuration of PA , PB and RS power
can be referred from the table
Start NE . Right click on “1”
choose configuration
management
Right Click on “2”
and choose data
batch
Insert Site name
Click “4”
Double click on “DL
Power Control”
Choose the sector
you want to change
Click Modify
After Modify, click
Save button
Synchronize all
changes ( can refer
to the slide-
Reserved mode
configuration)
Start Up Cell & Shut Down Cell
1. Start NE . Right click on “1”
choose dynamic
management
2. Key in the site name
3. Choose Immediate Shut
Down
4. Choose the sector that you
want to shut down.
5 . Click play button
6. Key in the passcode and OK
1. Start NE . Right click on “1”
choose dynamic
management
2. Key in the site name
3. Choose Start up cell
4. Choose the sector that you
want to shut down.
5 . Click play button
Data Pump
1. Start NE
2. Start NE
4. After started, choose
“system tool”
5 . Click on system tool and
type “ showhide”