Documentos de Académico
Documentos de Profesional
Documentos de Cultura
Guia para V.I.W
Guia para V.I.W
VISUAL
Introducción
• Antes de Soldadura
• Durante Soldadura
• Después de Soldadura
Organizing The Inspection Effort ….
VIW Reference Manual - Self-Study review for NDE and Tool usage
Review Results
AWS Part B Specification
Table of Contents
Conversion Table and SI Prefixes
Appendices and Usage
Footnotes and Tolerances (e.g. underrun)
Plastic Weld Replicas
Review Each Type of Weld Replica (Fillet A and B, Large and Small
T-Joints, Bend Tests, Tensile Samples)
6 inch Rule
1 inch Micrometer
Metric Dial Caliper
Palmgren Gage
Undercut Gage
Fillet Weld Gages
Six Inch Machinist’s Scale
Best to measure starting from the 1” mark rather than the end,
which may be worn, but don’t forget to subtract the 1” from result!
1 Inch Micrometer
Some calipers have both metric and U.S. Customary scales but
SI only for Exam
Palmgren Gage
Don’t use for measuring fillet weld sizes since plastic welds are
too small to do accurately.
Rotate ‘legs’ of gage to just touch toes of weld for best accuracy
V-WAC Undercut Gage - 1 of 2
Use scribed lines on gage for estimating size of second leg, or:
For convex welds, measure both legs for best accuracy; select
minimum leg as size
Convex Fillet Weld Gage Use - 2 of 3
Weld size is the lesser of the two legs for convex welds
Too Large
Correct Gage
Too Small
Concave Fillet Weld Gage Use - 1 of 2
Use scribed lines on gage for estimating size of weld legs if needed
Too Large
Too Small
Student Hands-On Tool Practice
Review answers
Practice Examination
Review Answers