Documentos de Académico
Documentos de Profesional
Documentos de Cultura
(Scatter chart)
Copyright@Ferdi2016
Dwi.ferdiansyah@gmail.com
IDART Processing
Data Needed :
1. Idart Tools with the following version
2. MR data (Busy Hour or Non Busy Hour at least 4 Hour)
3. Engpar (Engineering Parameter) >>>>>>>>>>>>>>>>>>>>>>>>>>>
4. Config MML
Process :
1) Run the following Idart tools processing
2) Input an necessary data as mentioned above
3) Choose the Function that you need to proceed (UMTS/GSM GEO, Terminal Analysis, Etc)
4) Set the parameter that we need e.g grid setting, Radius, etc.
IDART Processing
Benefit :
We can calculate the Quadrant Calculation and Coverage Distribution (RX-Lev and RX-Qual) to se
the coverage condition
• Good condition
• High traffic area
• Poor coverage
• Bad area
• Interference Area
IDART Processing
1) Configure Data Sources
IDART Processing
1) Choose the UMTS/GSM Function e.g GSM/UMTS GEO
Setting parameters
related to the weak
coverage geographic
display
IDART Processing
Example of outputting data
IDART Processing
outputting data
Import the
following (.MIF)
data to the Map
info(any version)
IDART Processing
Process data
By the Calculation with Excel file using Scatter chart (in telkomsel project
called Spinoza) we can see the Condition of the coverage and quality on
your Area/Cluster by four category as mentioned above
Result Of Quadrant
IDART Processing