Documentos de Académico
Documentos de Profesional
Documentos de Cultura
COUPLING
PRINCIPLE
A coupling is defined as mechanical
device that permanently joins two
rotating shafts to each others. The
shafts that are connected by the
coupling can be disengaged only after
dismantling the coupling
In this case protecting circumferential rims cover bolt head and nuts.
In case of failure of nuts and bolts while machine
is being rubbed, broken pieces will dash against this rim and finally
fall down. This protects the operator against accident.
The resolving bolts and nuts are unsafe to operator and may lead to accident.
WORKING AND
CONSTRUCTION
A
SELECTION OF MATERIAL
Rigid
MATERIAL
SHAFT
FLANGE
MANUFACTURING METHODS
Rigid
Heating: This is the 2nd process done on cutting part. The part
is heated at high temperature but below recrystallization
temperature.
Forging & Rolling: In this process the shape is given to material
and forged into desired shape by using closed dye.
Drilling: The part is drilled at PCD where the bolt is fitted.
According to no. of application of bolts, drilling is done.
Surface Polishing: It is done by using emery paper or polishing
machine.
Anti Rust Coating: This is done to protect flange from rust.
Flanges have complex shapes and easiest method to make the flange is
casting.
flanges are usually made of grey cast iron of grade FG200,
the bolt key and shaft are made of plain carbon steel.
ADVANTAGES-
DISADVANTAGE-
2. It can be used only where the motion is free from shocks and vibration.
APPLICATION:
2. To transfer power
THANK
YOU