Documentos de Académico
Documentos de Profesional
Documentos de Cultura
Equipment Requirements
To help ensure the systems functional integrity, the
Halliburton BACE assembly must be used with a float shoe
and float collar which has a back pressure rating that exceeds
the true hydrostatic pressure and temperature at true depth
(TD).
The BACE Tool and the associated floating equipment should
be manufactured to the proper casing size, weight, grade and
thread type for the expected pressure and temperature at TD.
Halliburtons Super Seal II family of float shoe and collar
products are needed to match the BACE collar system.
Required Halliburton job modeling with use of Landmark
WELLPLAN Flotation software to optimize placement of
BACE collar and achieve maximum casing flotation
Thread type anchoring systems eliminate shear pins and casing holes
No holes in the BACE collar that could be a leak path over the life of the well
Operated with use of standard Halliburton bottom plug with rupture disk
Can incorporate the use of Halliburton NR Plugs (if casing size allows)
Less than 200 psi needed to deactivate floatation and displace the
internal assembly to the float collar
System is PDC drillable
Can also be used on liners and sub sea cementing applications as well
as with two stage cementing if placed below the stage cementing tool
Risks/considerations
Surge & swab (Transient)
Differential sticking
Surface equipment
While running casing, the air or lighter weight fluid trapped inside the casing is used for floatation in the
lower section of the pipe
10
11
12
13
14