Está en la página 1de 1

Wabco ABS D basic version

X2 plug 18 pins X1 plug 14 pins

15 12 10 13 11 14 18 17 3 6 1 4 2 5 8 9 5 1 3 10 11 4 9 15 7 14 8

OFF ROAD ABS

DIAGNOSTIC B

DIAGNOSTIC A
ENDURANCE BRAKE

ENDURANCE BRAKE
WL 5A

EV AV EV AV EV AV EV AV KL 15 (ign) KL 30 (batt)

A1L A1R A2L A2R

A1R A2R

To manually start the ABS


Blink code connect a wire to
Pin 15 then to an external bulb
(max 24 volt 5 watt) then to a live
feed (possibly pin 7) then short pin
1 4 7 10 13 16 1 4 7 10 13 15 to ground via a switch for
A2L 3 seconds to start the blink code
A1L
2 5 8 11 14 17 2 5 8 11 14

3 6 9 12 15 18 3 6 9 15

Unplugged: short circuit warning light on

This is a basic wiring diagram for a ABS D system, some ECU’S in this range may differ slightly.
The ECU numbers this diagram applies to are as follows:
( all numbers start with 446 004 …)
302. 304. 305. 306. 307. 308. 309. 310. 311. 312. 313.
14. 315. 316. 317. 318. 319. 320. 322.

También podría gustarte