Documentos de Académico
Documentos de Profesional
Documentos de Cultura
11/11/2011
High Fire Flame Length, inches (mm) Measured from the outlet end of the combustor Maximum Chamber Temperature, F (C)
Natural Gas, Propane, Butane3 (For any other mixed gas, contact Eclipse Inc.) 7.5 410 (186) 556 (252)
Maximum inputs for packaged blower versions are given for the standard combustion air blower without an inlet air filter. 2 For proper performance, this pressure must be kept constant across the burner operating range. 3 See Design Guide 111 for more information about typical fuel composition and properties. 4 All weights are approximate. All information is based on laboratory testing. Different chamber sizes or conditions will affect the data. All inputs based upon gross calorific values and standard conditions; 1 atmosphere, 70F (21C). Eclipse reserves the right to change the construction and/or configuration of our products at any time without being obliged to adjust earlier supplies accordingly.
Performance Graphs
1000
100
90 80
Propane
% Excess Air
NOX ppm
100
70 60
10
Input and excess air at low fire changes with ratio regulator adjustment.
50 40
0
Natural Gas
0 0
1000 300
2000 600
3000 900
4000 1200
5000 1500
6000
7000
8000
Input (kW)
Input (kW)
Emission data is given for: Ambient combustion air ~70F (21C) Less than 1000F (540C) firing chamber Minimal process air velocity Low fire input adjusted to 80,000 Btu/h (23 kW) ppm volume, dry @ 3% O2 Neutral chamber pressure Emissions are influenced by: Chamber conditions Fuel type Firing rate Ratio regulator adjustment Combustion air temperature CO emission is largely influenced by chamber conditions. Contact your local Eclipse representative for an estimate of CO emission on your application.
(Measured Between Tap C & the Chamber with the Burner Firing)
30 25
12
30 70 60 25
10
20 15 10 5 0
8 6 4 2 0
0
1000 2000 3000 4000 5000 6000
50 40
20
15 10 5 0 0 0
30 20
10
Input (x 1000 Btu/h)
0
300 600 900 7000
0
1500 1800 2100
2000 400
Input (kW)
1200
4000
6000 2000
8000 2343
Input (kW)
1200
1600
A Sparkrod B
152.4 (6.0) Actuator Connection Point (1/2 NPT or M16 without Thread)
Tap B Tap D 4X 12 (0.5) 521 (20.5) 300 B.C. (11.8) 215.2 (8.5) Flamerod or UV Scanner 335.2 (13.2)
Blower Size 50 Hz 60 Hz
Blower Size 50 Hz 60 Hz
Air Inlet 6 welded inlet 261.7 (10.3) 390 (15.4) 4X 14 (0.6) 521 (20.5)
175 (6.9)
336 (13.2)
346 (13.6)
26 (1.0)
342 (13.5)
6X 14 (0.6)
342 (13.5)
Combustor Types
Alloy Tube
256 (10.0) OD 4x 12 (0.5) 300 (11.8) bolt circle 153 (6.0)
Nozzle
Nozzle
334 (13.1)
440 (17.3)
17 (0.7)
6 (0.25)
25 (1.0)
4x (0.6) 14
334 (13.1)
Bolt Circle 390 (15.4)
6 (0.25)
25 (1.0)
Burner Configurations
Inverted Left Hand Piping Inverted Right Hand Piping