Está en la página 1de 2

Die Cutting Machine

Die Cutting Machine or Platen Punching & Creasing Press particularly designed for Die
Cutting, Scoring and Creasing Work on PAPER, LINOLEUM, CARD-BOARD, CORRUGATED
BOARD, FIREBOARD, CORK, LEATHER, PLASTIC AND PVC MATERIALS etc. Most
Handsome and compact patronized Model requires Minimum Floor-Space. Minimum
“Make-Ready” Time and provides sufficient hourly production.

Basic Description
The very sturdy construction of
“NORMAN” Die Cutting Machine or Platen
Punching & Creasing Press guarantees for
perfect works under heaviest conditions.
Frame, Platen & Main Gears made of
special high tensile Cast Iron are resistant
to deformation even if subjected to
greatest strain. The platen is driven from
the ball bearing mounted shaft through a
pair of reduction spiral gears protected by
guards. The main gear shaft and
connecting arms are mounted on
Phosphor Bronze bushes. The reduction
gear shaft is made of hardened high
quality alloy-steel. Lubricated counter-
pressure elements prevent the gears from
deviating under the work pressure.
NORMAN

Electromagnetic Clutch & Break System


Electromagnetic clutch & brake in Die Cutting Machine enables push-button control of the
machine for easy and efficient operation. Complete safety is ensured by full electrical
interlocking. Electrical synchronization of both the clutch and the brake eliminates the
possibility of time lag or over-lag between driving & braking. Instead of Pedal Control,
there is a clean panel within operator's easy reach from where all machine operations can
be controlled
Dwell Timing Device
This timing device in Die Cutting Machine can be set to give a variable period from 0.5 to
10 seconds. During this time the platen remains stationary in the open position before
automatically resuming motion at the end of the set dwell period. This is a particularly
useful feature where feeding work requires a fine register or when large or difficult sheets
are being fed which would otherwise have to be run using the single impression
procedure. This device can increase output to more than double that of a machine on
single impression working and can also be of great assistance during the training of an
operator. This model differs from pedal controlled machines being driven by Electro
Magnetic Clutch & Brake Unit and Training Control Dwell.
Safety in the Machine
All moving parts on Die Cutting Machine are protected by approved safety guards. A
special feature is the patented guard which protects the operator from the moving block.
Should any object come between the moving block and this guard, a slight backward
movement of the guard will occur stopping the moving block immediately and isolating
the starting mechanism. Until the Guard is moved forward by hand the machine remains
dead and isolated from any attempt to actuate it through the starting mechanism.

Inside Chase
20"x26" 20"x30" 23"x33" 25"x37" 32"x42" 36"x51" 42"x62" 52"x72"
Size

Platen Size 22"x28" 22"x32" 25"x35" 28"x40" 35"x45" 39"x54" 45"x65" 56"x76"

H.P. 3 3 3 5 7.5 10 10 15

Impressions/Hr 1800 1800 1700 1500 1300 1100 1000 800

Weight Appx.
2.6 2.8 3.4 4 5.4 6.5 9.5 13.5
MT

Area reqd.
74x59x62 74x61x62 74x66x58 78x71x60 88x78x66 90x82x71 95x90x80 105x105x86
{inches}
Also available: Inner chase size: 28”x40”,55”x65” increase 2” more both side for platen
size

También podría gustarte